Detailed offer Description Use: This equipment is used to purify the used machinery oil, hydraulic oil, compressor oil, motor oil, mediate-load gear oil, cooler oil, steel rolling oil, quench<BR>oil, flash swift quench oil, etc. in mine, metallurgical industry, machinery,<BR>chemical industry, rubber industry, instrument, traffic, petroleum drilling and<BR>exploring, construction ceramics, precision pressure casting, etc. The oil to be<BR>treated is from No.5 to No.1500 that is in high, mediate or low viscosity in movement.<BR>This kind of machine is specially used to purify the oil from cement, chemical<BR>and fertilizer production. Sometimes the oil to be treated has as much as<BR>70% impurities in it, such as aqueous acid, ammonia acid, carbon, dust-sand-clay,<BR>moisture content, etc. The water separated form the oil treated by this equipment<BR>has different colors: the water color can be milk white if the aqueous acid<BR>in it is serious. The color can be blue if the ammonia acid in it is very much.<BR>The color can be white if the oil has been seriously polluted by alkalis. The<BR>waste water from the treated oil has much snow-like floating matter on it. This<BR>equipment takes only the physical principle methods to treat the oil. It takes no<BR>chemical agent for purification. Therefore, the oil treated remains its original<BR>color.<BR><BR>Characteristics <BR>1. The vacuum oil filter researched and developed by this Institute can treat low<BR>and high viscosity lubricating oil in various kinds. It needs no special conditions<BR>on environment except electricity and waste oil. The waste oil can be treated<BR>everywhere and whenever. The operation is simple and easy. The maintenance for<BR>the equipment is simple and easy, too. And the cost is very little. The electricity<BR>consummation is only 50% of the whole machine in summer and 60% in winter.<BR><BR>2. When using this equipment to deal with any polluted oil, no chemical agent is<BR>needed. It is purely mechanical and physical purifying methods. Thus, the oil treated<BR>remains the same nature and function. <BR><BR>3. Wind cooling method is adopted. Therefore, the vapor separated from the polluted<BR>oil can be condensed into liquid in only 2 seconds and discharged completely<BR>soon. Thus, the water source is protected as the water cooling method consumers<BR>much fresh water (it is special suitable for treating the high-viscosity oil and<BR>the water-in-oil that is quite abnormal.)<BR>