fan coil,AHU(Air handling Unit,Cabinet air conditioner and more.

  Main functions and features: Fuse Action at 70 valves shut down automatically Manual closed and opened, the opening angle is not adjustable Closed signal outputs to chain-closed ventilation equipment Specifications (L * W * H): 250 * 150 * 1500 ~ 2000 * 1250 ** 250 mm Structure: Valve, bushings, control unit Technical parameters: Temperature sensor movements at 70 ?? Refractory time: 1.5 hours Air volume: 290 CBM / H * SM standard state Full drag coefficient at: <0.4

  Valves - T308-1

  Valves - FYH-SFVD Description: Main functions and features: Fuse Action at 70'C, valves shut down automatically Manual closed and opened, the opening angle is not adjustable Closed signal outputs to chain-closed ventilation equipment Specifications (L * W * H): 210 * 100 * 100 ~ 500 * 320 ** 210 mm Structure: Valve, bushings, control unit Technical parameters: Temperature sensor movements at 70'C Refractory time: 1.5 hours Air volume: 290 CBM / H * SM standard state Full drag coefficient at: <0.4

  PYK-SMD Normally closed, DC24V signal to open Closed signal outputs to chain-closed ventilation equipment Specifications (L * W * H): 350 * 350 ~ 1000 * 1000 mm The main structure: Valve and the valve, the implementing agencies Technical parameters: Open the voltage / current: DC24V/0.5A Close voltage / current: DC24V/0.6A after 20s Reset Torque: 1500 N / cm

  Main functions and features: Fuse Action at 70 valves shut down automatically Manual closed and opened, the opening angle is not adjustable Closed signal outputs to chain-closed ventilation equipment Specifications (L * W * H): 210 * 100 * 100 ~ 500 * 320 ** 210 mm Structure: Valve, bushings, control unit Technical parameters: Temperature sensor movements at 70 ?? Refractory time: 1.5 hours Air volume: 290 CBM / H * SM standard state Full drag coefficient at: <0.4

  Ball Spout : Performance and specifications Spherical adjustable intake can be divided into 10 kinds of specifications, which is suitable for air conditioner, workshop etc. By adjusting the control unit to achieve the satisfied air flow volume. 30%T/T as deposit to our account before production,70% balance against to our account within 5 work days after delivery

  VDL Diffuser: In terms of cooling or heating, air supply perspective can be achieved by adjusting the blades angle. Because of large scale of wind blowing, it can be suitable for industrial plants or senior activities centers, as well as public places (such as: industrial plants, airports, theaters, bank etc.) Structure: VDL has four different specifications, positive outlets equip with adjustable blades and flow laps. The leaves can be manually adjusted, or by pneumatic device or electrical device to fulfill the task. A hydrostatic tank top or side openings are for motor control, another separate detection hole on the other side. Material: cold-rolled galvanized steel panel

  FK-WF external waterproof Air Grill: External waterproof outlet as an external walls air grill, its structure has the advantage of resisting rain to splash into the internal facility,

  FK-WF external waterproof Air Grill: External waterproof outlet as an external walls air grill, its structure has the advantage of resisting rain to splash into the internal facility,

  Square intake includes FK-FZ,FK-FC, and FK - FS. FK-FZ&FK-FC are the blower for four directions; FK-FS is a kind of lower for three directions. The leaves are fixed at 45 degree angle.

  Square intake includes FK-FZ,FK-FC, and FK - FS. FK-FZ&FK-FC are the blower for four directions; FK-FS is a kind of lower for three directions. The leaves are fixed at 45 degree angle.

  FK - DG Air Grill: Integrated air return, decoration, maintenance intake into one unit, it can be opened easily to clean strainer, using hinge frame structure.

  FK - DG Air Grill: Integrated air return, decoration, maintenance intake into one unit, it can be opened easily to clean strainer, using hinge frame structure.

  Ball Spout : Performance and specifications Spherical adjustable intake can be divided into 10 kinds of specifications, which is suitable for air conditioner, workshop etc. By adjusting the control unit to achieve the satisfied air flow volume. 30%T/T as deposit to our account before production,70% balance against to our account within 5 work days after delivery

  FK-R Air Grill: Alloy shaped by mould, and treat after spray process, nylon filter. It is usually used to commercial places

  FK-R Air Grill: Alloy shaped by mould, and treat after spray process, nylon filter. It is usually used to commercial places

  FK-R Air Grill: Alloy shaped by mould, and treat after spray process, nylon filter. It is usually used to commercial places

  The product synopsis Air exchanger is one kind of system to treat feculent air by the filtration, the purification, the heat exchanging processing evacuation, simultaneously handle the fresh air after the filtration, the purification, the heat change processing to keep indoor temperature unchanged to realize inside and outside air change bidirectional. The new air isometric replacement is one kind of high tech product with highly effective energy conservation, the environmental protection Unit has composed: Heat-exchange system, dynamic system, control system, noise reduction system and box body Principle: The heat-exchange system uses the static-like converter to make the cold air and hot air exchange hot with highly effectiveness The dynamic system uses the low chirp air blower with highly effective to filter, to purify, to input the fresh air which is after the heat change processing, simultaneously discharges the feculent air. The filtration system may select the highly effective filter according to the design request, establishes in two gusty areas The outer covering uses the alloy skeleton, the outer wall which is made of color steel plate or the stainless steel plate, is filled with polyethylene to make it more hear preservation. Serviceability: Suits for 15-1100 square meter construction unit.

  GK Series cabinet air conditioning unit, referencing JB/T9066-1999 standards, was state of the art air-conditioning units developed to meet user requirements. According to user requirements, heating, cooling, humidification, filtration sterilization, and other evolutionary function can easily be realized. It is widely used in hotels, shopping malls, airports, hospitals, office buildings and other public buildings. It also can be used for the industries of electronics, textiles, chemicals, pharmaceutical, food and so on. GK Series air conditioning unit not only has the superior performance on cooling and heating, featuring low noise, reasonable structure, light weight, easy installation and maintenance, but also can be adjusted to control the air flow to meet any demand of the building which space is limited. Characteristic: Alloy frame:filled with polyester foam. Fan:Adopt centrifugal fan which features low noise and vibration Chiller:Manufactured based on ARI Std.Test under the pressure of 2.8Pa to guarantee good capability and quality. Drip tray:The Tray need to be installed with a little angle to benefit the water flow. Inhaler:Specially designed filter can be conveniently drawn out from top to bottom, which is particularly convenient to maintain within limited space. Filter material may be nylon or others.

  GK Series cabinet air conditioning unit, referencing JB/T9066-1999 standards, was state of the art air-conditioning units developed to meet user requirements. According to user requirements, heating, cooling, humidification, filtration sterilization, and other evolutionary function can easily be realized. It is widely used in hotels, shopping malls, airports, hospitals, office buildings and other public buildings. It also can be used for the industries of electronics, textiles, chemicals, pharmaceutical, food and so on. GK Series air conditioning unit not only has the superior performance on cooling and heating, featuring low noise, reasonable structure, light weight, easy installation and maintenance, but also can be adjusted to control the air flow to meet any demand of the building which space is limited. Characteristic: Alloy frame:filled with polyester foam. Fan:Adopt centrifugal fan which features low noise and vibration Chiller:Manufactured based on ARI Std.Test under the pressure of 2.8Pa to guarantee good capability and quality. Drip tray:The Tray need to be installed with a little angle to benefit the water flow. Inhaler:Specially designed filter can be conveniently drawn out from top to bottom, which is particularly convenient to maintain within limited space. Filter material may be nylon or others.

  Cabinet air conditioner - GK-L

  Central air conditioner - DSC_0051

  Central air conditioner - DSC_0052

  Central air conditioner - DSC_0049

  Central air conditioner - DSC_0048

  Fan coil - GK-L

  Installation of unit 1. The unit shall be installed by professional personnel. 2. The fan coil unit shall be handled with cares and protected from heavy compression. Handling the unit with hand holding the impeller or spiral case shall not be allowed. 3. Before installation, the unit shall be checked for damage. In case of collision damage, deformation or dropping of fan motor, please contact the dealer for repair or replacement. 4. For safety, the lifting apparatus for the unit shall be sufficiently strong to bear running weight and vibration. The unit is merely allowed to bear its own weight and shall not be stressed by air pipeline and water pipeline or other external objects. The unit shall be kept level, or the 5. condensed water would overflow. Connection of pipeline and anti-frosting measures 1. The water inlet and outlet pipelines shall be connected carefully and the torque shall not exceed the specified value. It is recommended to seal the connections with sealing tape to avoid torsion-generated leakage. 2. The water inlet and outlet pipelines shall be thermally insulated to avoid generation of condensed water. 3. The condensed water pipeline shall have drain slope of at least 0.005 to facilitate draining of condensed water. Electrical connection 1. The unit shall be wired as per the instruction of connection box and the unit is fed from 1/N/PE AC 220V 50Hz power and the power voltage shall not exceed the rated voltage by 10%. Excessive high voltage would result in increased noise, too low voltage result in insufficient air flow rate, and fluctuating voltage result in damage of motor. 2. If case of in-gang operation of several units with a common switch, it is merely applicable to units of same model and specification and their wiring shall be correct and consistent, otherwise, the motor would be burnt out. For the sets of in-gang units, the capacity of the switch shall be considered. In-gang operation of units of different models or specification shall not be allowed. Requirements of water supply 1. The cooling water and the hot water for the unit shall be softened water of temperature not below 5'C and not above 80?栲espectively and the water shall be clean. Steam shall not be used. 2. Before initial running, the water inlet and outlet valves and the washing water system shall be at first closed and then the valves opened. The system water outlet shall be fixed with a filter to avoid foul or blocking of coil. Frost crack prevention 1.In case of external temperature below 2'C, even under shutdown state the water inside the coil shall be still kept at circulating. 2. In case of shutdown in winter, all circulating water shall be completely drained from the unit and its pipeline of water system. Use and maintenance 1. In order to keep air and coil clean, at installation the air inlet of air duct shall be fixed with air filter or our filter and the filter shall be regularly cleaned. 2. After installation, the fan coil unit shall be checked for friction noise through slightly rotating its fan impeller and after no friction noise detected the unit may be switched on. 3. At initial running and change-over of hot/cold water, the vent valve shall be opened to discharge air from coil. After escape of water, the vent valve is re-closed; otherwise, the heat-exchange effect would be impaired. 4. In case of trouble, the unit shall be repaired by professional personnel. Electrical wire connection diagram: 3-step switch High-speed Middle speed low speed Switch of electrical heater User's wiring area Power supply Connection box Red (High-speed) Blue (Middle speed) Black (low speed) Zero Yellow/green (earth wire) Auxiliary electrical heater

  Fan coil - FP-WM

  Fan coil - FP-LM

  Fan coil - FP-KM4(Alloy Cover)

  Fan coil - FP-BG

  Installation of unit   1.    The unit shall be installed by professional personnel.   2.    The fan coil unit shall be handled with cares and protected from heavy compression. Handling the unit with hand holding the impeller or spiral case shall not be allowed.   3.    Before installation, the unit shall be checked for damage. In case of collision damage, deformation or dropping of fan motor, please contact the dealer for repair or replacement.   4.    For safety, the lifting apparatus for the unit shall be sufficiently strong to bear running weight and vibration. The unit is merely allowed to bear its own weight and shall not be stressed by air pipeline and water pipeline or other external objects. The unit shall be kept level, or the condensed water would overflow.