Offer List

  model: YH0018 SERIES Breakaway is a safety device connected between the fueling machine and the nozzle.In case the oil pipeline is dragged by strong external force,the pulloff cutter will close the valve,seal automatically and cut oil flow off to prevent the oil pipeline from breaking.It can prevent mass fuel from extravasation under the situation that the power supply of the fueling machine cannt be disconnected in time to avoid the occurrence of dangerous accident. Features: 1.The main body is made of aluminium alloy and allumen, which are light and durable. 2. Beautiful appearance. 3. The springs are made of high quality stainless steel wire 1Cr18Ni9 with reliable performance. 4. Sealing materials are fluorubber and NBR with reliable sealability. 5. Valve core is 1010 nylon with high intensity and good aging resistance. 6. Provide all kind of connection forms for customers. Points for attention while installation: 1. There should not be relative moment of force at the two ends of the pulloff cutter to avoid anthropic damage. 2. At least one of the two ends hoses should be rotating connector. 3. The length of the two-end hoses should be more than 220 mm. 4. After dropping the pulloff cutter should be replaced but not reassembled to prevent form incorrect reassembling

  YH0012 Series Emergeney Shut-Off YH0012 Series Emergeney Shut-Off Valve is to be used together with submerged oil-pump type fueling machine.It can cut off the oil flow automatically and rapidly and is a protection for submerged oil-pump type fueling machine.This valve adopts fusible material and cutting ring.Valve core will close auto-matically to cut off oil-flowing pipe in case of catching fire or oiling machine damaged by knocking. ◆Materials Body:Cast iron(Spray-paint) Seal:Buna-N O-ring ◆Technical Parameters Flow rate:0-120L/M Working pressure:0.3Mpa Valve closing speed:<1s Emergency cutoff force:350N?m~550N?m Lowest shut-off temperature:75℃ Medium:water,gasoline,diesel and kerosene ◆Special Notice The application of Galaxy products should comply with the relative laws and regulations of local government. The choice of products is limited to the limitations of products' specifications, surrounding environments and mutual solubility of fuel products. Galaxy products are not guraranteed to apply to any certain site. All explanation and description herein subject to the latest products information of the same time. Galaxy reserves the rights to change prices, materials, specifications, and modes at any time, not to inform in advance and undertake responsibility when abandoning current modes. ◆Features 1. Threaded outlet of upper body is convenient for connection with the inlet of flowmeter of fueling machine. 2. High temperature pressure relief valve is used to relieve the pressure increasing with the temperature of oil in the pipeline due to the cutoff of cutting ring and close of auxiliary valve when oiling machine breaks down. 3. (Normally open type) auxiliary valve can stop oil reverse flowing and leaking when it is closed. 4. The holder can make auxiliary valve normally open to reduce the resistance of oil flow and that will not affect its flux. 5. Spring is used to strengthen sealing performance when auxiliary valve closes. 6. Cutting ring is cut off under stress and ensures the cutoff moment of 350-550N·m. 7. Main valve is used to close the oil flow to oiling machine from submerged oil pump. 8. Main body is made of HT200 cast iron and inside or outside threaded inlet is for your option. 9. Testing jack is used to test the pressure in pipeline after being installed with a pressure meter. 10.Tumbler is a holder to keep main valve normally open. Using special alloy Galaxy1#can ensure the normal action under 75 ℃.

  Description: Pressure Seal Swing Type Disc Type 1 Standard Type 2 Optional With Eye Bolt By Pass On Request Lever &Weight Optional Design: ASME B16.34 Face to Face: ANSI B16.10 End to End: ANSI B16.10 End Flang: ANSI B16.5 BW End: ANSI B16.25 Test: API 598 Special: NACE MR-01-75 ITEM PART NAME MATERIAL 1 Body ASTM A216 GR.WCB 2 Seat Ring ASTM A105+Stellite Faced 3 Disc ASTM A216 GR.WCB+13Cr Faced 4 Disc Washer ASTM A276 Type 410 5 Disc Nut Pin Stainless Steel 6 Disc Nut Stainless Steel 7 Hinge ASTM A216 GR.WCB 8 Hinge Pin ASTM A182 GR.F6 9 Bearing Bracket ASTM A216 GR.WCB 10 Spring Washing Carbon Steel 11 Hex.Bolt Carbon Steel 12 Bonnet ASTM A216 GR.WCB 13 Gasket ASTM A182 GR.F304 14 Thrust Ring ASTM A276 Type 410 15 Separate Ring ASTM A276 Type 410 16 Cover ASTM A216 GR.WCB 17 Cover Bolts ASTM A216 GR.B7 18 Cover Bolt Nuts ASTM A194 GR.2H 19 Eye Bolt Carbon Steel

  Description: Model YH0009 Series Swivel Sight Glass is a device used to observe whether the pipeline of fueling machine is filled with liquid. The sight oil glass can rotate with the hose. ■Features: 1.Material Sight-pipe frame: H62 Sight-pipe: quartz glass Seal component: NBR Joint: 20# 2.Performance: pressure resistance 0.3 MPa 3.Surface treatment: decorative chromeplating 4.Model YJ0009 Series Rotating Sight Oil Indicator can be connected directly with the hose by users, omitting mid connecting device and redu-cing costs. 5.Turn within 360°, avoid the kink of hose, reduce wear and tear and keep off the forming of tension so that the using life of hose is pro-longed. It is an ideal component for the oiling machine of stilt oiling type. 6.The joint adopts 20# steel to save precious metal.It is at low price.

  material of main part: body .bonnet:S.S, C.s, disc :S.S, carbon steel stem :S.S Sealing:RUBBER, PTFE,ALLOY

  Features: OS&Y,Rising Stem Bolted Bonnet Flexible Wedge Extended Bonnet for Cryogenic Services By Pass On Request Locking Device Optional Specificatios: Design:ASME B16.34/API 600 Face to Face:ASME B16.10 End to End :ASME B16.10 End Flang :ASME B16.5/ASME B16.47 BW End :ASME B16.25 Test:API 598 Special:NACE MR-01-75

  Features Specificatios: OS&Y,Rising Stem Pressure Seal Flexible Wedge Backseat Weld-Deposited By Pass On Request Locking Device Optional Gear Optional Specificatios: Design: ASME B16.34 Face to Face: ASME B16.10 End to End: ASME B16.10 End Flang: ASME B16.5 BW End: ASME B16.25 Test: API 598 Special: NACE MR-01-75

  ITEM PART NAME MATERIAL 1 Body ASTM A216 GR.WCB+Stellite Faced 2 Seat Ring ASTM A105+Stellite Faced 3 Disc ASTM A216 GR.WCB+13Cr Faced 4 Disc Washer ASTM A276 Type 410 5 Disc Nut Pin Stainless Steel 6 Disc Nut Stainless Steel 7 Hinge ASTM A216 GR.WCB 8 Hinge Pin ASTM A182 GR.F6 9 Bearing Bracket ASTM A216 GR.WCB 10 Spring Washing Carbon Steel 11 Hex.Bolt Carbon Steel 12 Gasket Soft Iron+Graphite 13 Cover Bolt ASTM A193 GR.B7 14 Cover Bolt Nut ASTM A194 GR.2H 15 Cover ASTM A216 GR.WCB 16 Eye Bolt Carbon Steel 17 Pulg Carbon Steel Design: ASME B16.34/BS 1873 Face to Face: ANSI B16.10 End to End: ANSI B16.10 End Flang: ANSI B16.5 BW End: ANSI B16.25 Test: API 598 API 6D Special: NACE MR-01-75 Bolted Cover Swing Type Disc Type 1 Standard 2"-24" Type 2 Standard 14"-24" 6"&Larger With Eye Bolt By Pass On Request Lever&Weight Optional

  model: YH0021 YH0022 SERIES Description: YH0021 and YH0022 oil pipeline connectors are the devices, which are used in stilt (rising oilout type) fueling machine to connect the metering mechanism with the hose adaptor. Features: 1.The main part is forged by using high-quality carbon steel,which is of high intensity. 2.It has beautiful chromeplated surface and good anticorrosive performance.

  model:YH0034 YH0035 Description: Connecting respectively with two metering systems and an air-eliminator despenser vane pump, YJ0034 or YJ0035 three-way coupling is a device delivering oil to two different cars, which improves efficiency of the fueling machine. Characteristics: 1.Light weight Aluminium alloy casting . 2.With great inside diameter and little fluid resistance 3.Directly installed on the unipump with good stability 4.Easily realize"one oil pump in and two metering system out"without other pipelines connected.

  model: ZYQ89-120LB

  Luxury nozzle boot is specially designed for high-grade fueling machine and used to place nozzle and auxiliary power control switch. Features: 1.Aluminum alloy die-casting molding, light and beautiful 2.Reasonable design as well as smooth and luxury streamline 3.Peening treatment on surface 4.Foldaway oil gun seat

  ■Compound main valve and reflux valve Compact structure,cute outline,reducion of pressure loss and increase of the flux. ■Accurate flux control Users can fill the oil tank according to precise amount required and stop oiling accurately and easily. ■Changeable 360°swivel joing Customers can change the joint according to the necessity to prevent the hose from twisting.

  Material quality:fored steel,WCB,P,R,304,316,304L,326L,copper,low-temperature steel,Meng Nai Erand so on. Nominal diameter:DN15～800mm 1/2"～32" CLASS:150～900LB JIS:10k～40k Nominal pressure:PN1.0～32.0MPa Driving mode:manual,worm wheel drive,electric,pneumatic and hydrody nameically operated and so on. Applicable temperature:-200～600℃ Applicable media:incorrosive media such as water,oil,gas pulp,coal powder and acid-alkali corrosive media.

  OS&Y,Rising Stem Bolted Bonnet Conic Disc Extended Bonnet for Crygenic Sevices Impact Handwheel Optional Gear Optional Design ASME B16.34 Face to Face ASME B16.10 End to End ASME B16.10 End Flang ASME B16.5 BW End ASME B16.25 Test API 598 Special NACE MR STANDARD MATERIALS OF PARTS ITEM PART NAME MATERIAL 1 Body ASTM A216 GR.WCB+Stellite Faced 2 Seat Ring ASTM A105+Stellite Faced 3 Disc ASTM A105+13Cr Faced 4 Disc Thrust Plate ASTM A276 Type 420 5 Disc Nut ASTM A276 Type 410 6 Stem ASTM A182 GR.F6a 7 Bonnet Bolt Nuts ASTM A194 GR.2H 8 Bonnet Bolts ASTM A193 GR.B7 9 Gasket Soft Iron+Graphite 10 Backseat Bushing ASTM A276 Type 410 11 Stem Packing Braided Graphite&Die formed Graphite Ring 12 Bonnet ASTM A216 GR.WCB 13 Eye Bolt Pins Carbon Steel 14 Gland ASTM A276 Type 410 15 Gland Flange ASTM A216 GR.WCB 16 Gland Eye Bolts ASTM A193 B7 17 Eye Bolt Nuts ASTM A194 GR.2H 18 Yoke Bush ASTM A439 GR.D-2 or Copper Alioy 19 Screw Carbon Steel 20 Handwheel Ductile Iron 21 Handwheel Nut ASTM A216 GR.WCB 22 Washer Carbon Stell 23 Yoke ASTM A216 GR.WCB 24 Yoke Pan Bolt Nuts ASTM A194 GR.2H 25 Yoke Pan Bolts ASTM A193 GR.B7 26 Bearing Steel

  ■ Adjustment of accurary The adjustor is fixed on the adjusting cover of cylinder cover I.The oil discharge volume reduces if adjusting clockwise,and it increases if adjusting anti-clockwise.Total adjusting volume is 240ml and min.adjusting increment is 0.05％.The adjustor is set at"zero position"and sealed with lead at factory. ■ General introduction This product can be used together with oiling machine to measure fuel with pressure source.It has such advantages as reasonable design,compact structure and accurate measurement. ■ Material Body:aluminum(surface spray paint) Sealing:NBR ■Technical Parameters Discharge rate:0.5L per revolution Diameter of output axis:9mm Rotary direction of output axis:Clockwise Overall dimensions: Level:200×200mm Horizontal:200mm Vertical:200mm Diameter of cylinder cover:72.4mm Travel of crankshaft:14.93mm Travel of piston(2and4):29.80-31.38mm Adjusting range of piton quantity(1and3):29.86mm Min.adjusting increment:0.05％ Working pressure:0.12mPa-0.3mPa Accuracy:±0.2％(within 5L/min to 100L/min) Repeat error:not exceed±0.1％ No leakage under 0.3MPa air pressure. Technical Paramters Discharge rate:0.5L per revolution Min.adjusting capacity:0.025％ Accuracy:±0.2％ Pepeat error:±0.1％ Max.Flow:90L Min.Flow:5L