Processed Glass
Tempered Glass Insulated Glass Laminated Glass Reflective Coated Glass Clear Float Glass Glass Curtain Wall Tinted Flat Sheet Glass Patterned Glass Silk-screen Glass Tempered Glass Lid

   Specification:1) Color: Clear2) Thickness: 3mm-12mm3) Size: 3300x2250, 3300x2134, 3300x2140, 3210x2250, 2440x1830, etc.4) Packing: EPE or paper interlayer, wooden crates Features:1) Produced by acid etching one side or both2) Distinctive, uniformly smooth and satin-like appearance, admits light while providing softening and vision control3) Used in both residential and commercial settings (doors, shower screens, furniture,wall paneling)4) The non-glare glass processed by acid is widely used for the picture frame and meters

  Laminated glass is produced by bonding two or more lites of glass on eigher side of a resilient interlayer(PVB or polyvinyl butyral) through beat and pressure.Characteristic:?Safety: Offers greater personal safety upon breakage as it tends to remain in place.?Sound Control: In area such as airports, hotels, offices, control rooms and homes, laminated glass lets you see the world, not listen to it.The PVB interlayer damperns the transmission of outdoor noise. The PVB interlayer of each lite works with the units air space to maximize sound control. ? Protection from harmful UV light: The PVB interlayer used in laminated glass will screen out over 99% of the suns harmful rays and radiant heat will help protet drapes, carpet, upholstery and wall coverings from fading-another benefit of our laminated glass.?Security: Laminated glass provides an element of security that cannot be achieved by other glass products. It can also be produced for bullet-resistant and blast-resistant applications.Variety:Common laminated glass, tempered-laminated sandwich glass, etc.Specification:Max: 2500x6000mmMin: 300x300mmThickness: 6-80mmQuality:National standard of Peoples Republic of China(GB9962-1999)

   The common classical curved tempered glass is the important model of the curved/tempered glass of BSJ. The accurate arc and smooth curve can satisfy the designers to the utmost extent for the streamline contour of the building. The introduction of classical curved/tempered glass declares the end of the era of common thermo-pressed glass. The classical curved/tempered glass made by BSJ is widely used in the fields of architecture, furniture and shower booth. Specification: max:3000(arc length) x 2400(heigt)mm min radius:460mm...

   Low-E Glass is produced by Vacuum Sputtering layers of coatings, including one or two layers of silver on glass. Silver is the material with lowest emissivity which is a measure of a materials ability to radiate energy. Ordinary clear glass has a surface emissivity level of 0.84, meaning 84% of the absorbed heat is emitted from the surface. When Low-E coatings are applied to glass, the surface emissivity is reduced to less than 0.1. Low-E products have best balance between visible light transmission and solar energy control. According to different using region and design requirement, Low- E glass is divided into two series such as solar control Low-E glass and high transparence Low-E glass. Our Low-E coatings has introduces the most advanced high-speed twin-magnetron magnetic control sputter coating glass production line from German AFC company.Double silver Low-E is the most sophisticated type of Low-E. It has two layers of silver and several layers of optical coatings, which help to reflect more long wave infrared energy, increase visible light transmittance and decrease its reflection,achieving the best energy savings effect.Compared to the common Low-E, Double silver Low-Es performance can be a 30% improvement on heat load at the same light transmittance levelCharacteristics:Moderate visible light transmittance.Lower transmittance of solar energy shading coefficient Sc 0.5.Higher reflectivity of far-infrared ray,lower heat transmission coefficient U Value.Solar control Low-E glass has rich decorative effect and shading effect for outdoor sight line.Charateristics:Realize to be curved and tempered after filming.It has optics and thermology performace and good energy-saving effect.Combining with other glass, bent tempered Low-E glass can be made into Low-E insulating glass, tempered Low-E insulating glass, heat strengthened Low-E insulating glass,etc.

   The largest size: 2500*3550mm Minimum dimension: 200*400mm Total thickness of the empty glass: 10-40mm Insulating glass is a multi-glass combination consisting of two or more panes enclosing a hermetically-sealed air space. The most important function of insulation glass is to reduce thermal losses, which offers many advantages: lower energy consumption, perfect transparency by reducing the incidence of condensation on the warm air side and the possibility of using larger glazed areas without increasing energy consumption. Product specification: The largest size: 2500*3550mm Minimum dimension: 200*400mm Total thickness of the empty glass: 10-40mm Thickness of alum frame: 6mm, 9mm, 12mm, nonstandard Products application: Door, window, curtain wall, enclosure, skylight and printing opacity roofing of the industry civil building, etc. Waiting room of the airport, rolling stock, freezer where have constant temperature request.

   With daily melting capacity of 3,700 tons raw materials(sand, etc) and annual production capacity of 1.35 million tons high-quality float glass, we have introduced advanced float glass production lines in the world to produce 0.4-19mm high-quality float glass among which 0.55-1.1mm ultra-white glass fills in a gap in domestic and widely used in many fields such as architecture, automobile, optics. Characteristics: High visible light transmittance High visibility and optical clarity Easily fabricated into other products including: tempered, insulated, laminated, etc. Even smoothness and thickness High precision defect control it with on-line laser scan equipment to control above 0.1mm defect. SpecificationThickness: 0.5mm, 1.1mm, 2mm, , 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10mm, 12mm, 15mm, 19mm Size:914x1220mm, 1500x2000mm, 1650x2140mm, 2140x3300mm, 2440x3050mm, 2440x3300mm, etc.Quality: All our glass accords with national GB11614 "Float Glass" standard

  Tempered glass: With good inflexible and heat resistant, it is up 3-6 times than a standard glass,and the press is more than 95 MPA; with good heat reliability, it can endure the temperature from 200-30000C, and for the standard one, it only can be 70-10000C. When broken, it only can be as small granules and will reduce the damage to personal and property to lowest. Products specification: Maximum dimension: 3000 x 3660 mm Minimum dimension: 100 x 100 mm The thickness: 4 - 19 mm Products application: window glass, curtain wall glass, the whole glass door, glass partition wall, bathroom glass, shopper window, escalator rail, building shielding etc.