Glass Machinery,Processed Glass,Building Material and more.

   length: 1000mmwidth: 333mmpieces/pack: 16piecesweight/pack: 32kgsqm/pack: 2.32m2One 20ft container can load about 1600m2(performance square meters on roof)

  length: 1000mm width: 333mm pieces/pack: 21pieces weight/pack: 30kg sqm/pack: 3.1m2 One 20ft container can load about 2350m2(performance square meters on roof)

  length: 1000mm  width: 333mm  pieces/pack: 21pieces  weight/pack: 22kg  sqm/pack: 3.1m2  One 20ft container can load about 3200m2(performance square meters on roof)

   Specification:1) Color: Clear2) Thickness: 3mm-12mm3) Size: 3300x2250, 3300x2134, 3300x2140, 3210x2250, 2440x1830, etc.4) Packing: EPE or paper interlayer, wooden crates Features:1) Produced by acid etching one side or both2) Distinctive, uniformly smooth and satin-like appearance, admits light while providing softening and vision control3) Used in both residential and commercial settings (doors, shower screens, furniture,wall paneling)4) The non-glare glass processed by acid is widely used for the picture frame and meters

  Laminated glass is produced by bonding two or more lites of glass on eigher side of a resilient interlayer(PVB or polyvinyl butyral) through beat and pressure.Characteristic:?Safety: Offers greater personal safety upon breakage as it tends to remain in place.?Sound Control: In area such as airports, hotels, offices, control rooms and homes, laminated glass lets you see the world, not listen to it.The PVB interlayer damperns the transmission of outdoor noise. The PVB interlayer of each lite works with the units air space to maximize sound control. ? Protection from harmful UV light: The PVB interlayer used in laminated glass will screen out over 99% of the suns harmful rays and radiant heat will help protet drapes, carpet, upholstery and wall coverings from fading-another benefit of our laminated glass.?Security: Laminated glass provides an element of security that cannot be achieved by other glass products. It can also be produced for bullet-resistant and blast-resistant applications.Variety:Common laminated glass, tempered-laminated sandwich glass, etc.Specification:Max: 2500x6000mmMin: 300x300mmThickness: 6-80mmQuality:National standard of Peoples Republic of China(GB9962-1999)

   The common classical curved tempered glass is the important model of the curved/tempered glass of BSJ. The accurate arc and smooth curve can satisfy the designers to the utmost extent for the streamline contour of the building. The introduction of classical curved/tempered glass declares the end of the era of common thermo-pressed glass. The classical curved/tempered glass made by BSJ is widely used in the fields of architecture, furniture and shower booth. Specification: max:3000(arc length) x 2400(heigt)mm min radius:460mm...

   Low-E Glass is produced by Vacuum Sputtering layers of coatings, including one or two layers of silver on glass. Silver is the material with lowest emissivity which is a measure of a materials ability to radiate energy. Ordinary clear glass has a surface emissivity level of 0.84, meaning 84% of the absorbed heat is emitted from the surface. When Low-E coatings are applied to glass, the surface emissivity is reduced to less than 0.1. Low-E products have best balance between visible light transmission and solar energy control. According to different using region and design requirement, Low- E glass is divided into two series such as solar control Low-E glass and high transparence Low-E glass. Our Low-E coatings has introduces the most advanced high-speed twin-magnetron magnetic control sputter coating glass production line from German AFC company.Double silver Low-E is the most sophisticated type of Low-E. It has two layers of silver and several layers of optical coatings, which help to reflect more long wave infrared energy, increase visible light transmittance and decrease its reflection,achieving the best energy savings effect.Compared to the common Low-E, Double silver Low-Es performance can be a 30% improvement on heat load at the same light transmittance levelCharacteristics:Moderate visible light transmittance.Lower transmittance of solar energy shading coefficient Sc 0.5.Higher reflectivity of far-infrared ray,lower heat transmission coefficient U Value.Solar control Low-E glass has rich decorative effect and shading effect for outdoor sight line.Charateristics:Realize to be curved and tempered after filming.It has optics and thermology performace and good energy-saving effect.Combining with other glass, bent tempered Low-E glass can be made into Low-E insulating glass, tempered Low-E insulating glass, heat strengthened Low-E insulating glass,etc.

   The largest size: 2500*3550mm Minimum dimension: 200*400mm Total thickness of the empty glass: 10-40mm Insulating glass is a multi-glass combination consisting of two or more panes enclosing a hermetically-sealed air space. The most important function of insulation glass is to reduce thermal losses, which offers many advantages: lower energy consumption, perfect transparency by reducing the incidence of condensation on the warm air side and the possibility of using larger glazed areas without increasing energy consumption. Product specification: The largest size: 2500*3550mm Minimum dimension: 200*400mm Total thickness of the empty glass: 10-40mm Thickness of alum frame: 6mm, 9mm, 12mm, nonstandard Products application: Door, window, curtain wall, enclosure, skylight and printing opacity roofing of the industry civil building, etc. Waiting room of the airport, rolling stock, freezer where have constant temperature request.

   With daily melting capacity of 3,700 tons raw materials(sand, etc) and annual production capacity of 1.35 million tons high-quality float glass, we have introduced advanced float glass production lines in the world to produce 0.4-19mm high-quality float glass among which 0.55-1.1mm ultra-white glass fills in a gap in domestic and widely used in many fields such as architecture, automobile, optics. Characteristics: High visible light transmittance High visibility and optical clarity Easily fabricated into other products including: tempered, insulated, laminated, etc. Even smoothness and thickness High precision defect control it with on-line laser scan equipment to control above 0.1mm defect. SpecificationThickness: 0.5mm, 1.1mm, 2mm, , 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10mm, 12mm, 15mm, 19mm Size:914x1220mm, 1500x2000mm, 1650x2140mm, 2140x3300mm, 2440x3050mm, 2440x3300mm, etc.Quality: All our glass accords with national GB11614 "Float Glass" standard

  BSJ Glass grinding machine for round edge: 1.Both sides of the glass will be processed to round edges after rough grinding,fine grinding, rough and fine polishing.2 .Wheels Rotation-Adjustment Structure is set. And wheels are easy to be replaced.3 .Easy operation and stable performance.4 .Could process glasses ranging from 3mm to 12mm in thickness and width between130mm and 1200mm

  Modified Bituminous Underlayment is a hybrid product created from asphaltic polymer and synthetic fabrics. Combining the best of both products, Modified Bituminous Underlayment boasts a lightweight material that is easy to carry, easy to install, good waterproof performance. Charateristic Resists leaking and tearing Resistance to slipping provides a safer installation Lightweight, flexible material Will not wrinkle or blow in the wind during installation Wont stick to metal roofing-thermal stability in excess of 260F Passes 110mph wind test and 4-hour water spray test with cap and roofing nails Hybrid technology combines asphaltic polymer and synthetic fabrics or superior performance property value length 145ft width 3.1ft weight ≥50lbs Tensile strength N/200mm CD≥300N MD≥300N Tensile tear strength CD≥1500gf MD≥1500gf Low temperature flexibility ≤23F heat resistance ≥185F

  We have many types of asphalt fiberglass shingles for your choice. Welcome to contact us for more informaton.

  Alkaline-resistant fiberglass mesh is woven by fiberglass yarn as its basis fabric, then coated by alkaline resistant latex; After surface treatment,this alkali-resistant mesh has fine alkaline-resistance and high strength, Water-resistance, alkali-resistance, flexibility, softness and resistance to aging; It is widely used in reinforcing walls, natural marble, plaster board, artificial stone materials,exterior insulation finishing system and renovating building surface; Features: 1/,Mesh size:4x4mm/4x5mm/5x5mm; 2/,Weight/m2: 65g-200g; 3/, Width/roll: 60 - 2,00cm; 4/, Length/roll: 20 - 500m; 5/, Color: white (standard), blue, yellow, etc; 6/,Packing: Shrank wrappedl each roll, 30 rolls per carton/ pallet or small cartons; PVC coated fiberglass mesh can be also produced. Special order to be negotiated.

  Modified Bituminous Underlayment is a hybrid product created from asphaltic polymer and synthetic fabrics. Combining the best of both products, Modified Bituminous Underlayment boasts a lightweight material that is easy to carry, easy to install, good waterproof performance. Charateristic Resists leaking and tearing Resistance to slipping provides a safer installation Lightweight, flexible material Will not wrinkle or blow in the wind during installation Wont stick to metal roofing-thermal stability in excess of 260F Passes 110mph wind test and 4-hour water spray test with cap and roofing nails Hybrid technology combines asphaltic polymer and synthetic fabrics or superior performance

  BuildingTopGuard 500 hybrid waterproof roofing underlayment is an 8-layer laminated roofing underlayment consists of multiple layer of asphalt, synthetic fiber, Non-woven, and HDPE, provides a vital second layer of protection on top of the building for waterproofing, and to prevent roof damage from rain or snow. Its construction results in high strength, low weight, unmatched tear resistance and long life tendency also almost half the cost of other synthetic underlayments. BuildingTopGuardR 500 simply is your best choice for roofing. Characteristics: ² Anti-leaking and tearing: Passed 110mph wind test and 4-hour water spray test with cap and roofing nails. ² Excellent tensile: CD??00, MD??00 ² Wrinkle free: Lay flat, stay flat, but flexible ² Anti-skidding: Textured surface provide good walking surface during installation ² Excellent stability: Strong fiber reinforcement, give the excellent elongation and life tendency ² 8-layer construction: Hybrid technology combines asphalt, synthetic fabric, HDPE ² Lightweight: Faster and quicker, over 450sq.ft coverage per roll, easy to carry and easy installation ² High temperature resistance: up to 260??nbsp; ² ASTM standard: Meets ASTM D 1970 for nail sealing ability of roofing underlayments ² UV endurance: Up to 90 days exposure for roof finishing

  Tempered glass: With good inflexible and heat resistant, it is up 3-6 times than a standard glass,and the press is more than 95 MPA; with good heat reliability, it can endure the temperature from 200-30000C, and for the standard one, it only can be 70-10000C. When broken, it only can be as small granules and will reduce the damage to personal and property to lowest. Products specification: Maximum dimension: 3000 x 3660 mm Minimum dimension: 100 x 100 mm The thickness: 4 - 19 mm Products application: window glass, curtain wall glass, the whole glass door, glass partition wall, bathroom glass, shopper window, escalator rail, building shielding etc.

  The glass straight-line edging machine is suitable for grinding straight side of flat glass in different size and thickness, and it can grind the bevel arris of the straight side to angle of 45°. The rough grinding, fine grinding for flat side and arris grinding can be finished at traveling of one time. Continuous processing can be taken for glass of the same thickness. The shininess of the grinding surface? will be almost the same as glass itself. Dimension: 6900*1000*2600mm Working height: 850mm Weight: 3000kg Power supply: 380V/50Hz Total power: 19.5kw Working speed: 0.5-3m/min Glass thickness: 3-25mm

  Z2022 glass grinding machine is designed for glass deep processing.The grinding,polishing and safe-corner-cutting can be completed in one process.Benefit from its elevator mechanism and Jaw-opening mechanism,it could process glasses ranging from 3mm to 25mm in thickness and from 250mm to 2000mm in width.The water-proof HMI with large screen makes it easy to operate. Main Features: 1.The automatic elevator mechanism makes it easier to replace wheels. 2.Two times of clipping&positioning ensure high processing precision. 3.Transmission belt with self clearing function keeps belt clean all the time. 4.De-coating function could be added to the machine

  BSJ Glass Washing & Drying Machine is designed for washing and drying glass,including flat glass, float glass, coated glass and Low-E glass. The machineis composed of washing system, drying system,?transferring system, escalating systemand control center, providing you a perfect washing effect. Main FeatureWater recycling systemTransmission rollers with self-cleaning functionControl center for escalating, thickness and speed adjusting; Q30: Glass Thickness: 3-40 (mm) Min Glas size: 250×250(mm) Max width: 3000mm Transfer Speed: 0.6-5m/min The escalating Span: 650 mm Power: 39.51kw Dimension: 6200*4100*2755 (mm)

  We offer CNC Auto Glass Cutting Machine Production Line The CNC cutting machine could be changed to semi-auto cutting machine. Loading time: 45-65 seconds (adjustable) Glass thickness: 3-19mm Glass size: 300-6000mm BSJN3826description: could cut different shapes, could optimize the layout with optimization software cutting speed: 0-120m/minglass thickness: 2-19mmmax. glass size: 3660*2440mmmin.cutting size: 20*20mmparellel tolerance: 0.15mm/mdiagonal tolerance: 0.20mm/mdimension: about 4000*2500*1350mmweight: about 2500kgs Breaking table description: used to break the glasses, enable the cutting machine to cut the next piece. good for high effeciency. Pls feel free to contact us if you want to order the product.

  BSJZ Double Straight-line Glass Edging Machine Production Line is composed of two Edging Machines, one Turning Table and one Washing & Drying Machine. The wheels number is optional due to the demand (like polishing effect, safe corner, etc.). The 90°Turning Table changes the processing direction by the belt steering mechanism. Main Features 1 Top quality and high efficiency; 2 Automatic processing line which can greatly reduce the scuffing or breaking-up caused during the transporting; 3 Accurate positioning ensures its stable and reliable performance; 4 At the feeding end, lengthwise positioning mechanism with side timing belt and crosswise backing-up device are installed to ensure the parallelism and diagonal accuracy.