Pulley

   Features: 1) T/AT series timing pulleys: T2.5, T5, T10, T20 2) XL, L, H, XH, XXH series timing pulleys 3) HTD series timing pulleys: 3M, 5M, 8M ,14M, XL, L 4) Types of bore: SB, TB, QD 5) Materials: 1045 steel, aluminum and stainless steel 6) Surface treatment: black oxidizing, phosphating, anodization and zinc-plating 7) Standard toothed bars are also available Our timing pulley's abroad experiences, ninety percent buyers from USA, US, Japan,France. Features Specifications: HTD-8M Pu timing belt (HTD-8M mode pitch=8.00mm) Polyurethane timing belt drive is a new type drive mode by use belt teeth and belt gear in mesh to transmit the driving force Timing belt adopts the high quality polyurethane as its main raw,iterial and is compounded with other ingredients of different Actions according to the new formulation. Timing belt drive has accurate synchronization.it neednt Lubricate and features no slip.no contamination and little noise. ltsHrive effciencv is up to O.98,The speed ratio range is large, thatcan reach1:10.The allowed line speed ratio range is large,that drivepower is suitable to multiple shaft drive from sevgral watts tohundreds of thousands of watts. Polyurethane timing belt has the following strong points:dynamic buckling resislance, crack resistance.good performance. excellentozone performance, aging resistance,cold resistance,oilResistance and wear resistance,etc. Polyurethae timing belt is widely applied to the machines intextile,autombile,chemical fiber,cigarette,pagermakng.Printing and chemical industries.it has growing demands to be used in mining.metakkurgy,steel and iron machinery and medical equipment these years.

   Plastic?pulley Belt and aluminium pulley of our company can be attachment or replacement of imported belt and pulley. Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width. The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3. Width of different specification of timing belt and pulley must conform to form4. Outside diameter of pulleys and size should be as form's regulation. We can also produce pulleys even sizes are not in the form. The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used. Features: The pitch&tooth type of double sided timing belt is same as synchronous belt. There are two kinds of double sided timing belt: DA type: Arrangement symmetrical ( see section a) DB type: Arrangement overlapping ( see section b) Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample

   Specifications: Belt and bearing pulley of our company can be attachment or replacement of imported belt and pulley. Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width. The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3. Width of different specification of timing belt and pulley must conform to form4. Outside diameter of pulleys and size should be as form's regulation. We can also produce pulleys even sizes are not in the form. The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used. Features: The pitch&tooth type of double sided timing belt is same as synchronous belt. There are two kinds of double sided timing belt: DA type: Arrangement symmetrical ( see section a) DB type: Arrangement overlapping ( see section b) Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample

   Features: 1) T/AT series timing pulleys: T2.5, T5, T10, T20 2) XL, L, H, XH, XXH series timing pulleys 3) HTD series timing pulleys: 3M, 5M, 8M ,14M, XL, L 4) Types of bore: SB, TB, QD 5) Materials: 1045 steel, aluminum and stainless steel 6) Surface treatment: black oxidizing, phosphating, anodization and zinc-plating 7) Standard toothed bars are also available Our timing pulley's abroad experiences, ninety percent buyers from USA, US, Japan,France. Features Specifications: HTD-8M Pu timing belt (HTD-8M mode pitch=8.00mm) Polyurethane timing belt drive is a new type drive mode by use belt teeth and belt gear in mesh to transmit the driving force Timing belt adopts the high quality polyurethane as its main raw,iterial and is compounded with other ingredients of different Actions according to the new formulation. Timing belt drive has accurate synchronization.it neednt Lubricate and features no slip.no contamination and little noise. ltsHrive effciencv is up to O.98,The speed ratio range is large, thatcan reach1:10.The allowed line speed ratio range is large,that drivepower is suitable to multiple shaft drive from sevgral watts tohundreds of thousands of watts. Polyurethane timing belt has the following strong points:dynamic buckling resislance, crack resistance.good performance. excellentozone performance, aging resistance,cold resistance,oilResistance and wear resistance,etc. Polyurethae timing belt is widely applied to the machines intextile,autombile,chemical fiber,cigarette,pagermakng.Printing and chemical industries.it has growing demands to be used in mining.metakkurgy,steel and iron machinery and medical equipment these years.

   We are Specializing in providing a wide variety of belt pulley. Detailed Description We are Specializing in providing a wide variety of belt pulley. ALPAR NO.: XZP006APPLICATION: Ford High Quality Crank Damper Pulley For Ford OEM:E1TZ-6316D? Application: Ford Racing (302) DAEWOO,HYUNDAI,KIA,SSANG YONG,VOLVO,TOYOTA,NISSAN,MAZDA,MITSUBISHI,ISUZU,HONDA,SUZUKI,DACIA,DAIHATU, HINO,V.W.,BENZ,SKODA,BMW,OPEL,PEUGOET,RENAUNT,CITROEN,GM,CHEVROLET, LADA,KAMAZ,VOLGA,MAZ,YAZ,TRACTOR,ZIL,MOSCOVITE,CITROEN,FIAT

   We are Specializing in providing a wide variety of belt pulley. ALPAR NO. :XZP028 APPLICATION: YOTOTA OEM13470-35020 DAEWOO,HYUNDAI,KIA,SSANG YONG,VOLVO,TOYOTA,NISSAN,MAZDA,MITSUBISHI,ISUZU,HONDA,SUZUKI,DACIA,DAIHATU, HINO,V.W.,BENZ,SKODA,BMW,OPEL,PEUGOET,RENAUNT,CITROEN,GM,CHEVROLET, LADA,KAMAZ,VOLGA,MAZ,YAZ,TRACTOR,ZIL,MOSCOVITE,CITROEN,FIAT

   We are Specializing in providing a wide variety of belt pulley. ALPAR NO. XZP047 APPLICATION Hyundai Series OEM:231243311 Application: Hyundai Elantra, Sonata Engine: L4/1.8L & 2.0L Year: 1992-1998 DAEWOO,HYUNDAI,KIA,SSANG YONG,VOLVO,TOYOTA,NISSAN,MAZDA,MITSUBISHI,ISUZU,HONDA,SUZUKI,DACIA,DAIHATU, HINO,V.W.,BENZ,SKODA,BMW,OPEL,PEUGOET,RENAUNT,CITROEN,GM,CHEVROLET, LADA,KAMAZ,VOLGA,MAZ,YAZ,TRACTOR,ZIL,MOSCOVITE,CITROEN,FIAT

   Specifications: Belt and pulley of our company can be attachment or replacement of imported belt and pulley. Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width. The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3. Width of different specification of timing belt and pulley must conform to form4. Outside diameter of pulleys and size should be as form's regulation. We can also produce pulleys even sizes are not in the form. The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used. Features: The pitch&tooth type of double sided timing belt is same as synchronous belt. There are two kinds of double sided timing belt: DA type: Arrangement symmetrical ( see section a) DB type: Arrangement overlapping ( see section b) Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample

   Auto pulley We are Specializing in providing a wide variety of Auto pulley,v-belt pulley. ALPAR NO. XZP037 APPLICATION Peugeot 405 High Quality Crank Damper Pulley For Peugeot Application:106 16V(97)/306 2.0(93-->),1.8(93-97)/405? 1.8,2.0/406 2.0TD/605 2.0TD DAEWOO,HYUNDAI,KIA,SSANG YONG,VOLVO,TOYOTA,NISSAN,MAZDA,MITSUBISHI,ISUZU,HONDA,SUZUKI,DACIA,DAIHATU, HINO,V.W.,BENZ,SKODA,BMW,OPEL,PEUGOET,RENAUNT,CITROEN,GM,CHEVROLET, LADA,KAMAZ,VOLGA,MAZ,YAZ,TRACTOR,ZIL,MOSCOVITE,CITROEN,FIAT

   Timing pulley Belt and pulley of our company can be attachment or replacement of imported belt and pulley. Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width. The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3. Width of different specification of timing belt and pulley must conform to form4. Outside diameter of pulleys and size should be as form's regulation. We can also produce pulleys even sizes are not in the form. The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used. Features: The pitch&tooth type of double sided timing belt is same as synchronous belt. There are two kinds of double sided timing belt: DA type: Arrangement symmetrical ( see section a) DB type: Arrangement overlapping ( see section b) Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample

  Specifications: Belt and pulley of our company can be attachment or replacement of imported belt and pulley. Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width. The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3. Width of different specification of timing belt and pulley must conform to form4. Outside diameter of pulleys and size should be as form's regulation. We can also produce pulleys even sizes are not in the form. The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used. Features: The pitch&tooth type of double sided timing belt is same as synchronous belt. There are two kinds of double sided timing belt: DA type: Arrangement symmetrical ( see section a) DB type: Arrangement overlapping ( see section b) Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample

   We manufacture and market universal Taper -Bushings, Taper Pulleys, from 1008 to 8085 as per your requirements. Our products adopt international standard, such as ISO, DIN, ANSI, BS and so on. Our products are applied on all kinds of ore mechanic, assembly line and automaticequipment. Also,We professionally export different kinds of transmission components, such as standard sprockets, taper lock sprockets, special sprockets, chain couplings, shafts, gears, pulleys, taper bushes and racks. All our products are produced strictly as per ISO9001 quality standard and exported to more than 50 countries.

   We manufacture and market universal Taper -Bushings, Taper Pulleys, from 1008 to 8085 as per your requirements. Our products adopt international standard, such as ISO, DIN, ANSI, BS and so on. Our products are applied on all kinds of ore mechanic, assembly line and automaticequipment. Also,We professionally export different kinds of transmission components, such as standard sprockets, taper lock sprockets, special sprockets, chain couplings, shafts, gears, pulleys, taper bushes and racks. All our products are produced strictly as per ISO9001 quality standard and exported to more than 50 countries.

   We manufacture and market universal Taper -Bushings, Taper Pulleys, from 1008 to 8085 as per your requirements. Our products adopt international standard, such as ISO, DIN, ANSI, BS and so on. Our products are applied on all kinds of ore mechanic, assembly line and automaticequipment. Also,We professionally export different kinds of transmission components, such as standard sprockets, taper lock sprockets, special sprockets, chain couplings, shafts, gears, pulleys, taper bushes and racks. All our products are produced strictly as per ISO9001 quality standard and exported to more than 50 countries.