MIST FAN

  Mist Fans Fog Cooling Fan (AM-650GH) Fog Cooling Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) (10) Hand Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4℃- 8 ℃ (8) Operation Temperature: 20 ℃- 80 ℃ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: ＜10 um (12) Capacity (Ground): 38 L (13) Jet distance: 8 m Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GB; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist Fan AM-702F20

  Mist Fans Mist Fan (AM-650GB) Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 ℃- 8 ℃ (8) Operation Temperature: 20 ℃- 80 ℃ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity (Ground):38 L (13) Jet distance: 8 m (14) G.W: 24.4KG; CBM: 0.118M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our mist fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist fan AM-702F20

  Mist Fans Misting Fan (AM-650GT) Misting Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 ℃- 8 ℃ (8) Operation Temperature: 20 ℃- 80 ℃ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity:Ground): 38 L (13) Jet distance: 8 m (14) G.W: 28.8KG; CBM: 0.20M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650W; (4) Mist fan AM-650C

  Mist Fan The ANMAX Fog Cooler Fan is one of the highly versatile products with low cost and low consumption in power for environmental control. The principle is using high-pressure plunger pump to make a high current of 10-micron fog droplets through the Fog Nozzle. The diameter of the water droplet is around 0.01mm. Such tiny droplet will evaporate quickly within the range. Using an electrical fan will make the air fresh and drop 5 ℃-10 ℃ in temperatures. One Fog Cooling Fan can affect an area of around 30M Square during performance. The dust can be suppressed form 10-1000 microns with the odor and dust control. Model: AM-702F20 Fan size: 20″ Discharge: 0.25L/Min Motor Power: 750W Fan Power: 130W Tank Capacity: 45L Voltage: 220-240V/50Hz 100-120V/60Hz Operation Time: 3 Hours Max Container Loading: 128PCS/20FT 256PCS/40FT Application: (1) Stockbreeding: deodorization, disinfection, cooling (2) Diggings and painting area: cooling, dust-catching, static-elimination (3) Greenhouse, wine-cellar: cooling and wetting (4) Spinning industry: wetting, static-elimination (5)Outdoor plaza, sports, open coffee, beer bars: sight, cooling, mosquito-killing (6) Kursaal, park, restaurant: sight, cooling, mosquito-killing (7) School, factory and warehouse: cooling We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist fan AM-650GB

  Mist Fans Wall Mist Fan (AM-650W) Wall Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 ℃- 8 ℃ (8) Operation Temperature: 20 ℃- 80 ℃ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity(Wall): 10 L (13) Jet distance: 8 m (14) G.W: 17.1KG; CBM: 0.093M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650GT; (4) Mist fan AM-650C; (5) Mist Fan AM-702F20

  Mist Fans Outdoor Cooling Fan (AM-650C) Outdoor Cooling Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 ℃- 8 ℃ (8) Operation Temperature: 20 ℃- 80 ℃ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip:＜10 um (12) Capacity(Ground): 38 L (13) Jet distance: 8 m (14) G.W: 25.4KG; CBM: 0.19M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650GT; (4) Mist fan AM-650W; (5) Mist Fan AM-702F20

  Mist Fans Steam Cooling Fan (AM-650GH) Steam Cooling Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) (10) Hand Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4℃- 8 ℃ (8) Operation Temperature: 20 ℃- 80 ℃ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: ＜10 um (12) Capacity (Ground): 38 L (13) Jet distance: 8 m Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GB; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist Fan AM-702F20

  Mist Fans Water Spray Fan (AM-650GT) Water Spray Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 ℃- 8 ℃ (8) Operation Temperature: 20 ℃- 80 ℃ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity:Ground): 38 L (13) Jet distance: 8 m (14) G.W: 28.8KG; CBM: 0.20M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650W; (4) Mist fan AM-650C

  Mist Fans Mist Cooling Fan (AM-650GB) Mist Cooling Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 ℃- 8 ℃ (8) Operation Temperature: 20 ℃- 80 ℃ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity (Ground):38 L (13) Jet distance: 8 m (14) G.W: 24.4KG; CBM: 0.118M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our mist fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist fan AM-702F20

  Mist Fan The ANMAX Fog Cooler Fan is one of the highly versatile products with low cost and low consumption in power for environmental control. The principle is using high-pressure plunger pump to make a high current of 10-micron fog droplets through the Fog Nozzle. The diameter of the water droplet is around 0.01mm. Such tiny droplet will evaporate quickly within the range. Using an electrical fan will make the air fresh and drop 5 ℃-10 ℃ in temperatures. One Fog Cooling Fan can affect an area of around 30M Square during performance. The dust can be suppressed form 10-1000 microns with the odor and dust control. Model: AM-702F20 Fan size: 20″ Discharge: 0.25L/Min Motor Power: 750W Fan Power: 130W Tank Capacity: 45L Voltage: 220-240V/50Hz 100-120V/60Hz Operation Time: 3 Hours Max Container Loading: 128PCS/20FT 256PCS/40FT Application: (1) Stockbreeding: deodorization, disinfection, cooling (2) Diggings and painting area: cooling, dust-catching, static-elimination (3) Greenhouse, wine-cellar: cooling and wetting (4) Spinning industry: wetting, static-elimination (5)Outdoor plaza, sports, open coffee, beer bars: sight, cooling, mosquito-killing (6) Kursaal, park, restaurant: sight, cooling, mosquito-killing (7) School, factory and warehouse: cooling We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist fan AM-650GB

  Mist Fans Water Mist Fan (AM-650C) Water Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 ℃- 8 ℃ (8) Operation Temperature: 20 ℃- 80 ℃ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip:＜10 um (12) Capacity(Ground): 38 L (13) Jet distance: 8 m (14) G.W: 25.4KG; CBM: 0.19M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650GT; (4) Mist fan AM-650W; (5) Mist Fan AM-702F20

  Mist Fans Atomization Fan (AM-650W) Atomization Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 ℃- 8 ℃ (8) Operation Temperature: 20 ℃- 80 ℃ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity(Wall): 10 L (13) Jet distance: 8 m (14) G.W: 17.1KG; CBM: 0.093M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650GT; (4) Mist fan AM-650C; (5) Mist Fan AM-702F20