Cut to length line

  pipe making machine, pipe machine, tube machine, steel tube machine,steel pipe making machine Specifications 1.Product Specifications 1.1 Round pipe diameter range: 8-16mm;14mm-38.1mm; 20mm-60m 60mm-90mm and so on.Wall thickness :0.4mm-1mm; 1mm-3.75mm, 1-6mm. 1.2 Square and rectangle tube : 40*40mm-90*90mm?? Wall thickness range 0.6-4.0mm 1.3 Tube and pipe length: 6-12m 1.4 Output: 50m/min-100m/min 2. Material Specifications: Low carbon steel and low alloy steel??and stainless steel KJP Series high frequency longitudinally welded pipe production line is used to manufacture welded steel pipes of Φ16mm-Φ165mm with 1.5mm-5.0mm of wall thickness, which also can produce profiled pipes within the limit of processing round pipes, such as the square pipes. After absorbing advanced pipe making technology from both abroad and domestic, our innovative designed production line is not only economical but also practical. Technical Flow:Uncoiling & Flattening→High-frequence weldind→Bead and burr removing→Cooling-Sizing Inside Removing→Cutting→Checking & Collecting

  pipe making machine, pipe machine, tube machine, steel tube machine,steel pipe making machine Specifications 1.Product Specifications   1.1 Round pipe diameter range: 8-16mm;14mm-38.1mm; 20mm-60mm         ;60mm-90mm and so on.        Wall thickness :0.4mm-1mm; 1mm-3.75mm, 1-6mm.   1.2 Square and rectangle tube : 40*40mm-90*90mm           Wall thickness range 0.6-4.0mm   1.3 Tube and pipe length: 6-12m   1.4 Output: 50m/min-100m/min 2. Material Specifications:   Low carbon steel and low alloy steel  and stainless steel     KJP Series high frequency longitudinally welded pipe production line is used to manufacture welded steel pipes of Φ16mm-Φ165mm with 1.5mm-5.0mm of wall thickness, which also can produce profiled pipes within the limit of processing round pipes, such as the square pipes. After absorbing advanced pipe making technology from both abroad and domestic, our innovative designed production line is not only economical but also practical. Technical Flow:Uncoiling & Flattening→High-frequence weldind→Bead and burr removing→Cooling-Sizing Inside Removing→Cutting→Checking & Collecting

  I. General Induction. Cut To Length Lines can do uncoiling, straightening, gauging, cross-cutting to lengt and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating.Cut to length line is controlled by PLC system. It has CNC controlled single shaft feeder, The information of length, shearing numbers and speed can be input to the CNC systems. When the need shearing number is reached the line can stop automatically. The line speed can be adjusted, It has a gauge with high precision, and whole line can work automatically and operate easily, smooth sheet can be made.II. machine components in the cut to length line1. coil car 2. decoiler3. entry support device 4. width adjustor device 5. straightening machine 6. gauge table7. shearing mahine 8. run off table9. pneumatic discharge and stacker device10.unloading table11. pneumatic system12. Electrical system with computer PLC program control. 13. Hydraulic system

  I. General Induction. Cut To Length Lines can do uncoiling, straightening, gauging, cross-cutting to lengt and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating.Cut to length line is controlled by PLC system. It has CNC controlled single shaft feeder, The information of length, shearing numbers and speed can be input to the CNC systems. When the need shearing number is reached the line can stop automatically. The line speed can be adjusted, It has a gauge with high precision, and whole line can work automatically and operate easily, smooth sheet can be made.II. machine components in the cut to length line1. coil car 2. decoiler3. entry support device 4. width adjustor device 5. straightening machine 6. gauge table7. shearing mahine 8. run off table9. pneumatic discharge and stacker device10.unloading table11. pneumatic system12. Electrical system with computer PLC program control. 13. Hydraulic system

  General Introduction this line is used in decoiling, straightening and shearing different specification coils into flat steel plate with different width and length, and then stacking the flat steel plate. this production line which is high automatization and simple operation can process all kinds of cold or hot rolling carbon steel, galvanized plate, aluminum plate, stainless steel etc. it is widely used in auto, container,homeelectricity,food-packing,architecture,ship-building, boiler-making and so on.

  I. General Induction. Cut To Length Lines can do uncoiling, straightening, gauging, cross-cutting to length and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating. Cut to length line is controlled by PLC system. It has CNC controlled single shaft feeder, The information of length, shearing numbers and speed can be input to the CNC systems. When the need shearing number is reached the line can stop automatically. The line speed can be adjusted, It has a gauge with high precision, and whole line can work automatically and operate easily, smooth sheet can be made. II. machine components in the cut to length line 1.coil car 2.decoiler 3.entry support device 4.width adjustor device 5.straightening machine 6.gauge table 7.shearing machine 8.run off table 9.pneumatic discharge and stacker device 10.unloading table 11.pueumatic system 12.Electrical system with computer PLC program control 13.Hydraulic system

  Description: . General Introduction Slitting line can do uncoiling, slitting and recoiling works, make coil steel to any needed width coil steel. It mainly includes coil car, uncoiler,correct device, slitting machine, scrap recoiler, tension unit, press unit, recoiler and coil car, hydraulic system, ect. It mainly used in coil or hot rolling carbon steel, silicon steel and all the other kinds of metal materials with surface spreading. This line can be adjusted to do recoiling or dividing work to meet customer's demand. PLC system is used to select the information from every part of the line,centrally controlled. There also has speed self adjusted and keep memory after lost power supplyment . So the line has efficient performance.

  I. General Induction. Cut to length line is used in decoiling, straightening and shearing different specification coils into flat steel plate with different width and length, and then stacking the flat steel plate. this production line which is high automatization and simple operation can process all kinds of cold or hot rolling carbon steel, galvanized plate, aluminum plate, stainless steel etc. it is widely used in auto, container,homeelectricity,food packing,architecture,ship-building,boiler-making and so on. II.Machine Structure and Technical Description This line with hydraulic, pneumatic, electromotion, mechanical and electric control is automation production line. III.Machine components in this production line as follow: 1.hydraulic coil car 2.hydraulic decoiler 3.hydraulic hold down device 4.limited space worktable 5.straightening main machine 6.fixing ruler worktable 7.shearing mahine 8.feeding worktable 9.pneumatic discharge rack 10.Hydraulic automatic lifter table 11.discharge worktable 12.hydraulic pneumatic system 13.Electrical control system.

  I. General Induction. Cut To Length Lines can do uncoiling, straightening, gauging, cross-cutting to length and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating. Cut to length line is controlled by PLC system. It has CNC controlled single shaft feeder, The information of length, shearing numbers and speed can be input to the CNC systems. When the need shearing number is reached the line can stop automatically. The line speed can be adjusted, It has a gauge with high precision, and whole line can work automatically and operate easily, smooth sheet can be made. II. machine components in the cut to length line 1.coil car 2.decoiler 3.entry support device 4.width adjustor device 5.straightening machine 6.gauge table 7.shearing machine 8.run off table 9.pneumatic discharge and stacker device 10.unloading table 11.pueumatic system 12.Electrical system with computer PLC program control 13.Hydraulic system

  1) Models: KJC 2) Material width (mm): 1000/1250/1,300 / 1,600 / 2,000 3) Material thickness (mm): 0.6 - 6.0mm 4) Coil load (kg): 2,000 / 3,000 / 7,000 / 10,000kg 5) Coil inner diameter (mm): 508 6) Coil outer diameter (mm): 1,200 7) Speed (m/min): 15-20 8) Straightening precision 9) Coil expansion: hydraulic 10) Gauge precision: +/-1.0 11) Power motor (kW): 100 12) Coil car: optional 13) Air hold down arm: stander I. General Induction. Cut To Length Lines can do uncoiling, straightening, gauging, cross-cutting to length and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating. Cut to length line is controlled by PLC system. It has CNC controlled single shaft feeder, The information of length, shearing numbers and speed can be input to the CNC systems. When the need shearing number is reached the line can stop automatically. The line speed can be adjusted, It has a gauge with high precision, and whole line can work automatically and operate easily, smooth sheet can be made.

  I. General Induction. Cut To Length Lines can do uncoiling, straightening, gauging, cross-cutting to lengt and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating.Cut to length line is controlled by PLC system. It has CNC controlled single shaft feeder, The information of length, shearing numbers and speed can be input to the CNC systems. When the need shearing number is reached the line can stop automatically. The line speed can be adjusted, It has a gauge with high precision, and whole line can work automatically and operate easily, smooth sheet can be made.II. machine components in the cut to length line1. coil car 2. decoiler3. entry support device 4. width adjustor device 5. straightening machine 6. gauge table7. shearing mahine 8. run off table9. pneumatic discharge and stacker device10.unloading table11. pneumatic system12. Electrical system with computer PLC program control. 13. Hydraulic system

  I. General Induction. Cut To Length Lines can do uncoiling, straightening, gauging, cross-cutting to length and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating. Cut to length line is controlled by PLC system. It has CNC controlled single shaft feeder, The information of length, shearing numbers and speed can be input to the CNC systems. When the need shearing number is reached the line can stop automatically. The line speed can be adjusted, It has a gauge with high precision, and whole line can work automatically and operate easily, smooth sheet can be made. II. machine components in the cut to length line 1.coil car 2.decoiler 3.entry support device 4.width adjustor device 5.straightening machine 6.gauge table 7.shearing machine 8.run off table 9.pneumatic discharge and stacker device 10.unloading table 11.pueumatic system 12.Electrical system with computer PLC program control 13.Hydraulic system

  Specifications:1) Model: KJS-1,000/1,300/1,500/2,0002) Coil thickness: 0.15-0.5/0.25-1.5/0.3-2/1-8mm3) Coil width (mm): 1,000/1,300/1,500/2,0004) Coil weight (kg): 2,000-3,000/5,000/10,0005) Coil OD (mm): 1,200/1,5006) Coil ID (mm): 5087) Feed speed: 120m/min8) Main motor (kW): 30/55/729) Coil expansion: hydraulic/mandrel10) Uncoiler motor (kW): AC 0.75/1.511) Recoiler motor (kW) 55/72Features:Slitting line can do uncoiling, slitting and recoiling works, for any width coilsteel. It mainly includes coil car, uncoiler, shearer, correct device, slittingmachine, scrap recoiler, tension unit, press unit, recoiler and coil car, and hydraulicsystem. It is mainly used in coil or hot rolling carbon steel, silicon steeland all the other kinds of metal materials with surface spreading.This line can be adjusted to do recoiling or dividing work to meet customers' demands.PLC system is used to select the information from every part of the line, centrallycontrolled. Speed self adjusted function keeps memory after power cut. So theline has efficient performance.

  I. General Induction. Cut to length line is used in decoiling, straightening and shearing different specification coils into flat steel plate with different width and length, and then stacking the flat steel plate. this production line which is high automatization and simple operation can process all kinds of cold or hot rolling carbon steel, galvanized plate, aluminum plate, stainless steel etc. it is widely used in auto, container,homeelectricity,food packing,architecture,ship-building,boiler-making and so on. II.Machine Structure and Technical Description This line with hydraulic, pneumatic, electromotion, mechanical and electric control is automation production line. III.Machine components in this production line as follow: 1.hydraulic coil car 2.hydraulic decoiler 3.hydraulic hold down device 4.limited space worktable 5.straightening main machine 6.fixing ruler worktable 7.shearing mahine 8.feeding worktable 9.pneumatic discharge rack 10.Hydraulic automatic lifter table 11.discharge worktable 12.hydraulic pneumatic system 13.Electrical control system.

  The main machine adopts the structure of series QC12Y hydraulic swing beam shear. Special CNC system for shear. The drive element of backgauge adopts importing ball screw and linear guideway

  1) Models: KJC 2) Material width (mm): 1000/1250/1,300 / 1,600 / 2,000 3) Material thickness (mm): 0.6 - 6.0mm 4) Coil load (kg): 2,000 / 3,000 / 7,000 / 10,000kg 5) Coil inner diameter (mm): 508 6) Coil outer diameter (mm): 1,200 7) Speed (m/min): 15-20 8) Straightening precision 9) Coil expansion: hydraulic 10) Gauge precision: +/-1.0 11) Power motor (kW): 100 12) Coil car: optional 13) Air hold down arm: stander I. General Induction. Cut To Length Lines can do uncoiling, straightening, gauging, cross-cutting to length and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating. Cut to length line is controlled by PLC system. It has CNC controlled single shaft feeder, The information of length, shearing numbers and speed can be input to the CNC systems. When the need shearing number is reached the line can stop automatically. The line speed can be adjusted, It has a gauge with high precision, and whole line can work automatically and operate easily, smooth sheet can be made.

  Description: Technical parameter: 1. Manual decoiler : Non-motorize, manual expansion 2. Loading weight of decoiler: 5 Tons 3. main power: 22KW 4. roller station: 33 stands 5. shaft of roller: 80mm (heating process) 6. Motor power of hydraulic station: 5.5 KW 7. oil pump of hydraulic station(gear pump): CB-E310 8. the material of blade: Cr12 9. heating process of cutting blade:HRC600-620 10. forming thickness: 0.8-1.2mm 11. Width: 1000mm 12.length tolerance: 10¡À1.5mm 13. The single surface of roller is coated with chrome with 0.05 mm 14. Frequency converter 15. The computer adopts PLC control. 16. The operating broad adopts from Mitsubishi

  General Introduction this line is used in decoiling, straightening and shearing different specification coils into flat steel plate with different width and length, and then stacking the flat steel plate. this production line which is high automatization and simple operation can process all kinds of cold or hot rolling carbon steel, galvanized plate, aluminum plate, stainless steel etc. it is widely used in auto, container,homeelectricity,food-packing,architecture,ship-building, boiler-making and so on.