Feeder

  1) High speed SPM 600 2) Easily adjustable for different thickness and width 3) Practical and economical with simple mechanism 4) Easy maintained with less trouble Feed accuracy: Depends on feed length of stock and stroke of press, the general accuracy is within ±0.05mm, and can be better up to ±0.01mm by pilot pin with automatic stop system. Single type: 1) For cutting stock at certain length or coiling back the finished products 2) Double type: for there is any stuff left after stamping and for short or thin stock Mechanical features: 1) One way clutch: a) Made of tungsten carbide steel on the contacting surface to keep rigidity, precision, and durability b) The gear has high precision transmission after HRC 60 degrees heat treatment and precisely grinding 2) Roller: a) High feed accuracy at exact positioning with hollow roller of less eight, and lower inertia b) Hard chrome plated heat treated to HRC60 degree and ground for the best rigidity and durability 3) The anti-reversing device: a) The structure is same the one way clutch, It can precisely control the lower roller which will not reverse even for long time used as it is high in stability and precision b) The brake will not out of control by the splashed waste oil when it is punching such cause the lower roller to reverse, and transfer distance imprecision c) It will not cause high heat d) Super hard alloy and rolling post have been used. they are not easy to wear out e) The acting form of the rolling post is by circular movement, not like the four guided posts in straight line moving, so it will not stuck f) As less friction it will accrued, so the torsion it need will correspondingly reduced. The transfer structure will not easy wear out g) Speed can be reach to 30M/ min if the reversing device is fitted. In general, it is 20M/min. Efficiency has been increase about 50% h) Customers are welcomed to place orders for special specifications

  Specification List Specification UF-800 UF-1000 UF-1200 UF-1500 Width 120 120 150 150 Load Weight 1000 1500 2000 2000 Thickness 1.2 1.2 1.2 1.2 Load Height 600 600 600 600 Roll Diameter 800 1000 1200 1500 Delivery Speed 0-24 0-24 0-24 0-24 Motor 1/2 1 1 2 Machine Weight 250 300 350 400 Dimension (mm) 850 1050 1250 1550 750 950 1150 1450 500 500 500 500 380 380 380 380 1250 1450 1600 1900 1560 1560 1560 1560

  Description: 1. Suitable for processing of large sizes materials 2 Use magnetic valve operation (electric control is also available), use microswitch control 3. Flexible horse, match with punch and cutting height, change the material at random 4. Simple installation, safe and easy operation, small failure rate, precise feeding 5. The picture on the left is 8C; air reservoir is matched above

  1) High speed SPM 600 2) Easily adjustable for different thickness and width 3) Practical and economical with simple mechanism 4) Easy maintained with less trouble Feed accuracy: Depends on feed length of stock and stroke of press, the general accuracy is within ±0.05mm, and can be better up to ±0.01mm by pilot pin with automatic stop system. Single type: 1) For cutting stock at certain length or coiling back the finished products 2) Double type: for there is any stuff left after stamping and for short or thin stock Mechanical features: 1) One way clutch: a) Made of tungsten carbide steel on the contacting surface to keep rigidity, precision, and durability b) The gear has high precision transmission after HRC 60 degrees heat treatment and precisely grinding 2) Roller: a) High feed accuracy at exact positioning with hollow roller of less eight, and lower inertia b) Hard chrome plated heat treated to HRC60 degree and ground for the best rigidity and durability 3) The anti-reversing device: a) The structure is same the one way clutch, It can precisely control the lower roller which will not reverse even for long time used as it is high in stability and precision b) The brake will not out of control by the splashed waste oil when it is punching such cause the lower roller to reverse, and transfer distance imprecision c) It will not cause high heat d) Super hard alloy and rolling post have been used. they are not easy to wear out e) The acting form of the rolling post is by circular movement, not like the four guided posts in straight line moving, so it will not stuck f) As less friction it will accrued, so the torsion it need will correspondingly reduced. The transfer structure will not easy wear out g) Speed can be reach to 30M/ min if the reversing device is fitted. In general, it is 20M/min. Efficiency has been increase about 50% h) Customers are welcomed to place orders for special specifications