Offer List

        This is the smart spray coating furnace for the spray coating of static fluorine powder and fluorine paint.   Features of RFP Series as follows: 1. This series fluorine-lining sintering furnace can be operated by means of electric heating, diesel heating, gas heating, electric/diesel heating and electric/gas heating and other heating modes.   2. After the sintering parameters' presetting, they can adjust the heating power automatically and control the hearth's extreme temperature, without any temperature surge.   3. The oil-heating model boasts high atomization, with the autoignition.

        This is the smart spray coating furnace for the spray coating of static fluorine powder and fluorine paint.   Features of RFP Series as follows: 1. This series fluorine-lining sintering furnace can be operated by means of electric heating, diesel heating, gas heating, electric/diesel heating and electric/gas heating and other heating modes.   2. After the sintering parameters' presetting, they can adjust the heating power automatically and control the hearth's extreme temperature, without any temperature surge.   3. The oil-heating model boasts high atomization, with the autoignition.

        Features of  RFX series as follows: With high insulating property,the temperature in the hearth is even,while the sintering curve,fixed time value and temperature value can be set up.The error of working temperature inside the hearth is at +-1 centigrade and there is no error within a period 1,000hr of operation. With the stainless steel-made hearth’s inner bag and turntable,they will not rust. The waste gas is discharged from the pipe after the purification by activated carbon,without pollution and with good environmental-friendly performance.   This series furnace is classified as single-group program-controlled sintering furnace,multi-group program-controlled sintering furnace and network multi-group program-controlled sintering furnace according to various control systems. Single-group program-controlled furnace: Any sintering curve can be programmed as required and the rise time and temperature, constant temperature time and temperature remain the same after the startup of the unit. Multi-group program-controlled sintering furnace: Multiple groups of sintering curve can be programmed and called as required according to the sintering requirements of products. Network multi-group program-controlled furnace: Capable of paperless recording and group-unrestricted programming. Its sintering records can last one year. The multiple sintering furnaces can be operated at the same time and the remote control is available.

        Description:   PTFE molded sheet is manufactured by molded or skiving or cut from virgin PTFE resin. PTFE is the most chemical resistance material of all known plastics. It shows anti-aging and has the lowest coefficient of friction of all known solid materials. Skived Sheet available. Application: Can be used to make corrosion-resistant liner, seal, lining and gasket, scrap, guide rail, dielectric material for different frequency, bridge bearing slide. Specification: Technical parameter Index Unit Standard Apparent Density g/cm3 2.2~2.3 Tensile Strength Mpa ≥15.0 Ultimate Elongation % 150~400 Dialectic Strength KV/mm 10 Resistance of Surface (Working Voltage 500V) Ω 3.7x1016

        There are two kinds of PTFE rods to offer. One is manufactured by Paste extruding method in the diameter from 4 to 9mm and the other Is made by ram extruding method is the diameter from 10to 50mm; rods Over the diameter 50mm are manufactured by moulding. PTFE is the most chemical-resistant of all known plastics. It does not age. PTFE has a wide range of practicable temperature from 180 centigrade - +260 centigrade and a wax-like surface to which anything hardly sticks. PTFE has the lowest coefficient of friction of all known solid materials. It has the best electrical properties of all plastics. NO. Parameter    Units    Technical standards1 proportion    g/cm^3 2.1—2.32 breaking force Mpa ≥15.03 elongations at break % ≥200 Applications:Electrical Insulation,seal,Antisticking materials.