Flexo printing machine
binding machine

  YH Series four-color Flexography Printing Machine Performance and Characteristics 1. Easy operation, flexble starting, accurate color register. 2. The meter counter can set printing quantity according to the requirements. Stop the machinautomatically at the quantity or when the material is cut off. 3. Pneumatic printing cylinder lift and lower, is will stir the printing ink automatically after lifting. 4. The printing cylinder lift and lower, is will stir the printing ink automatically break circuit when the machine stops. Main Technical Parameter (as table). 5.360 ontinuous and adjustable longitudinal register device. 6. The frequency control of motor speed adapts to different printing speeds. 7. There are jogging/Stopping buttons on the plate roller base and material rolling rack so as to make it easy operate the machine when the plate is installed.

  Performance and Characteristics: 1. Easy to operate, gentle to start, and accurate chromaticity; 2. The printing quantity can be set with length counter in accordance with the requirements, and the machine will stop automatically by temperature controller; 3. Constant temperature control is realized automatically by temperature controller; 4. Printing ink is transferred by embossed soller, hence even ink color; 5. The drying system is reliable and suitable for htgh speed running and automatic turnoff if the machine stops; 6. Lengthways pattern aligning device with 360° Continuous adjustment is driven by synchronous motor; 7. Bilateral frequency conversion motor timing is adopted to meet diffrernt printing speed; 8. The inching button and stop button are all installed on the block base and material collecting shelf, in order to operate the machine conveniently when install the block; 9. Main Technical Parameter (as table).

    ZGR-320A LABLE(LOGO)FLEXO PRINTING MACHINE 1. Adopt the ceramic anliox to transfer the ink. 2. Each printing unit adopts 360 plate-adustment.  3.Computerized wb-gulding system is intalled in the front of printing unit, it ensure the material always in the right position. (standard configuration)4. After sheeting in the third die-cutting station, conveyor belt can output the product orderly. (option)5. Unwinding and rewinding tension are auto-controlled by magnetic powder, two rewinders is possible in this machine. 6. Video inspecting system is an option, it can watch the printing quality when in high speed. 7. The ink rollers will be separated from the printing roller, and keep running when the machine stops. 8. Main machine inverter is imported. 10. The machine can finish material-feeding, printing, varnishing, drying, laminating, die-cu ting, rewinding and sheeter in a lump, It is an ideal machine for printing note and top-grade adhesive label.