Rail cutting machine,Rail drilling machine and more.

  ZG-32 Motor Rail Drilling Machine a. Feature: The hole can be positioned accordingly and drilled with high precision. Working time is short and noise is small. Decelerator gear uses oil lubrication, which makes the transmission efficiency rise greatly. b. Technical parameter: motor engine power: 1.0KW drill bit rev. speed: 70rpm diameter of hole: Φ32 taper shank of drill bit: Morse No 4 dimension: 650×220×280mm total weight: 28kg

  QG-3II Motor Rail Cutting Machine ⑴ electric motor power: 3.0 kw ⑵ cutting time: 60kg/m rail, 60~90s ⑶ profile precision: ① verticality tolerance: ≤ 0.5mm ② flatness tolerance: ≤0.35mm ③ Profile is smooth and clean, not blue ⑷ total weight: 60kg

  NLB-300 motor bolt wrench a.max.output torque:3000N?m b.working efficiency:10pcs/min c.engine rated power:1.47kw d.suitable range:loosen & tighten M22~M24 screw e.total weight: 68kg

  NLB-300 internal combustion bolt wrench a.max.output torque:300N?m b.working efficiency:10pcs/min c.engine rated power:1.47kw d.suitable range:loosen & tighten M22~M24 screw e.total weight: 68kg

  NLB-600 internal combustion bolt wrench a.rated power: 5.5PS (4kw) b.max.loosening torque: > 600N?m c.tightening torque adjustable range: 80~170N?m d.working efficiency: ≤6s/screw e.sleeve center distance:214mm±0.5mm

  YTF-400II HYDRAULIC RAIL GAP ADJUSTER Technical parameter: 1. rated pulling force and trust: 40kN 2. working stroke of cylinder piston: ≥140mm 3. rated pressure: 52MPa 4. empty load efficiency:≥2.0mm/time 5. handle operating moment:≤450N.m 6. total weight: ≤125kg

  YZ-530 HYDRAULIC RAIL STRAIGHTENING DEVICE Technical parameter: 1. max rail straightening force: 530kN 2. rated working pressure of system: 52MPa 3. working piston stroke:70mm 4.piston pump diameter×stroke: Ф14×40 5. empty load efficiency: 1.6mm/time 6. total weight: 58kg

  YZ-750III HYDRAULIC RAIL STRAIGHTENING DEVICE Technical parameter: 1. rated rail straightening force: 640kN 2. max rail straightening force:750kN 3. cylinder system pressure: 52MPa 4. dimension: 850×520×240 5. total weight: 80kg

  YZ-750II HYDRAULIC RAIL STRAIGHTENING DEVICE Technical parameter: 1. rated rail straightening force: 600kN 2. max rail straightening force:750kN 3. rail straightening quantity: 3mm/time 4. system working pressure:59MPa 5. total weight: 93kg

  YLS-900 HYDRAULIC RAIL PULLING AND PUSHING DEVICE Technical parameter: 1. max rated working pressure: 57MPa 2. max force of pulling rail: 2×450kN 3. max stroke of working cylinder: ≥760mm 4. center distance between two pull rods: 360mm(50kg/m\60kg/m rail); 370mm(75kg/m rail) 5. locking way: slanting iron clamps rail waist 6. weight of unit: ≤370kg

  The formula of our grinding wheels is unique, craft is advanced, quality level catches up with and even surpasses the level of same products in USA. And Japan, occupies to the leading position in China. Characteristics: High intensity, high efficiency, few consumption , durable and not burn the rail. If you are interested in our products, please illustrate the specific specification, use terms and quality requests, so that we can offer you the satisfied products.

  The formula of our grinding wheels is unique, craft is advanced, quality level catches up with and even surpasses the level of same products in USA. And Japan, occupies to the leading position in China. Characteristics: High intensity, high efficiency, few consumption , durable and not burn the rail. If you are interested in our products, please illustrate the specific specification, use terms and quality requests, so that we can offer you the satisfied products.

  The formula of our grinding wheels is unique, craft is advanced, quality level catches up with and even surpasses the level of same products in USA. And Japan, occupies to the leading position in China. Characteristics: High intensity, high efficiency, few consumption , durable and not burn the rail. If you are interested in our products, please illustrate the specific specification, use terms and quality requests, so that we can offer you the satisfied products.

  The formula of our grinding wheels is unique, craft is advanced, quality level catches up with and even surpasses the level of same products in USA. And Japan, occupies to the leading position in China. Characteristics: High intensity, high efficiency, few consumption , durable and not burn the rail. If you are interested in our products, please illustrate the specific specification, use terms and quality requests, so that we can offer you the satisfied products.

  NQG-5III Internal Combustion Rail Cutting Machine Technical Parameter: ⑴ petrol engine power: Japan petrol engine 4.8 kw ⑵ cutting linear velocity: Vmax=63m/s ⑶ diameter of grinding wheel: Φ400×Φ32×3 ⑷ profile precision: ① verticality tolerance: ≤ 0.5mm ② flatness tolerance: ≤0.35mm ③ Profile is smooth and clean, not blue ⑸ total weight: ≤ 43kg

  YTF-400 HYDRAULIC RAIL GAP ADJUSTER Technical parameter: 1. max thrust: 400kN 2. working gas pressure: 56.4MPa 3. max control force: 470N 4. total weight: 85kg

  YH LIGHT-DUTY GAS WELDING MACHINE Technical parameter: 1. max upset force of cylinder: 452kN(60kg/m),653kN(75kg/m) 2. max working stroke of cylinder: 155mm 3. max working pressure of hydraulic system:40MPa(60kg/m),50MPa(75kg/m) 4. hydraulic pump flow: 4L/min 5. total power of power source: 5.5kw

  D-3 Motor Tamping Machine ?⑴ electric motor: 350w ⑵ vibration force: 270kg ?⑶ form of pickaxe board: elasticity ⑷ material of shock absorption: rubber block ⑸ weight: 21kg

  YCD-22 Hydraulic switch tamping machine a.Internal combustion engine power: HONDA , 6.5PS (4.8kw) b.hydraulic system working pressure: 4.5~5MPa c.vibration frequency: 66.7HZ d.vibration force:22KN e.down inserting depth: below sleeper 110mm ± 10mm f.working efficiency: 40min/suit switch/suit machine g.king machine weight:300kg/set

  YQB-200×135 Hydraulic Track Lifting and Lining Machine ⑴ rated lifting force:200KN ⑵ rated lining force:135KN ⑶ max lifting quantity:120mm ⑷ max lining quantity: 80mm ⑸ hydraulic system pressure: 55MPa ⑹ weight: 21.8kg

  YQB-294×173 Hydraulic Track Lifting and Lining Machine ⑴ rated lifting force:294KN ⑵ rated lining force:173KN ⑶ max lifting force:385KN ⑷ max lining force: 210KN ⑸ max lifting quantity: 130mm ⑹ max lining quantity: 99.5mm ⑺ hydraulic system pressure: 63MPa ⑻ weight: 28kg

  NCM-4 Internal combustion Switch Grinding Machine ⑴ model of petrol engine: HONDA-GX160 ⑵ petrol engine power: 5.5HP ⑶ vertically grinding stroke: 170mm ⑷ total weight: 80kg

  GM-2.2 Motor Rail Grinding Machine ⑴ electric motor power: 2.2kw ⑵ rev. speed: 2840r/min ⑶ dimension of cupping grinding wheel: Φ150×80×Φ32 ⑷ weight: 70kg

  NGM-4.8 Internal Combustion Rail Grinding Machine ⑴ petrol engine power: 6.5PS (4.8kw) ⑵ king shaft rev. speed: 4100r/min ⑶ dimension of grinding stone: Φ150×65×Φ55 ⑷ grinding stone stroke: 90mm ⑸ grinding stone tilting angle: 90° ⑹ profile wheel center distance: ≥ 1000mm ⑺ traveling wheel center distance: 1450mm ⑻ total weight: 90kg

  YD-22II Hydraulic Tamping Machine ⑴ rated power: 13PS ⑵ hydraulic system working pressure: 4.5~5MPa ⑶ frequency: 66.7HZ ⑷ efficiency: 270roots sleeper/suit hour ⑸ net weight of king engine: diesel engine (electric motor): 400kg (300kg)

  ND-4 Diesel Tamping Pick ⑴ petrol engine power: 1.42kw ⑵ vibrating force: ≥ 4.2KN ⑶ idling amplitude: ≥ 5mm ⑷ frequency: 120~140HZ ⑸ diameter of vibrating & tamping bar: 52mm ⑹ rev. speed of eccentric block: 7000-8000r/min ⑺ total weight: 13.6kg

  NZG-31 Internal Combustion Rail Drilling Machine a. Feature: It is designed with a compact structure. Its rail-clamping device can be auto-locked. The hole can be positioned accordingly and drilled with high precision. The fluted twist drill bit is used. While drilling, water can be supplied automatically. b. Technical parameter: diesel engine power: 1.2KW rev. speed: ≥270rpm diameter of hole: Φ31 drilling time: ≤40s total weight: 17kg

  QG-4II Motor Rail Cutting Machine ⑴ electric motor power: 4.0 kw ⑵ cutting time: 60kg/m rail, 60~90s ⑶ profile precision: ① verticality tolerance: ≤ 0.5mm ② flatness tolerance: ≤0.35mm ③ Profile is smooth and clean, not blue ⑷ total weight: 65kg