Flat Marking Machine

  With bigger marking area .Labels can be marked semiautomatically with the label fixture ;mechanical part can be marked without the label fixture.The exhausting device is an innovation design of our factory,whichh can reduce the noises and improve the amenity of operators. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V 50HPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision:0.02-0.05mmWorking environment: regular working environment

  This type is of NCQ/A ,the marking area is about 200mm*110mm,Each X and Y direction has two channels ,with better precision and longer useful life.The marking needles are made of tungsten steel,it also make sure the precision of marking quality. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V  50~60HzPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/min Energy consumption: 100W (excluding commputer and air compressor)Repeat precision: 0.02-0.05mmWorking environment: regular working environment

  Marking surface: Flat surface or curved surface with flatness not exceeding 3mm Applicable Scope: Motor parts, mechanical parts, machine tools,hardware products, pumpvalves,electromechanical equipments,plastic products, labels (nameplate), etc. Major Parts: Main machine, pneumatic marking controller, pneumatic marking driver (software) Function Introduction: Labels can be marked semiautomatically with     the label fixture (optional); mechanical part can be marked  without the label fixture (some require simple fixtures that fit to the parts)

   Basic Principles: computer controls marking needle to move on the traces of the pre-edited characters and graphs,meanwhile to strike the materials at a high frequency under the application of compressed air ,thereby to form the needed characters and graphs Major Functions: software,applicable on windows 98/2000/XP/Vista platformas ,has strong editing functions,and easy to use ,capable to mark Chinese and English characters,arabic numerals and any other graphs,automatic marking serial number,international stand VIN code and scales. Applicable Scope: 1.Motor industry :marking manufacture serial number,date,name.,brand,etc.in the body ,framework,base plate,pillar,engine,commecting rod,cylinder piston,cylinder sleeve,etc. 2.Mechanical industry：marking on mechanical parts,machine tools,hardware products,steel tube,sleeve ,collar,roller,pump valve,ring flange,fastener. 3.Marking on apparatu,electromechanical instrument 4.Marking on plastic products Technical Parameters Marking contents: numbers,Chinese snd English characters,graphs Size of Characters: adjustable Marking depth:0.02--1mm(adjustable ,relevant to the material) Marking speed:100--2500mm/min Marking Materials: metals or nonmetals with hardness under HRC55 Marking Surface:flat or curved surface with flatness not exceeding 3 mm Power Source:AC220V±10% 50--60Hz Pneumatic Pressure:0.3--0.7MPa Atmosphere Consumption:25--40L/min Energy Consumption: 100W Repeat Precision: 0.02--0.05mm Working Environment: Regular working environment

  Major parts: main machine, pneumatic marking control machine, pneumatic marking driver(software optical disk) Applicable to motor parts, mechanical parts, machhine tools, hardware products, pump valve, electromechanical equipment, plastic products, labels, etc. Functions: Labels can be marked semiautomatically with the label fixture (optional); mechanical parts can be marked without the label fixture (some require simple fixtures that fit to the parts). Items Marking Area (mm2) Maximun Height (mm) Weight (kg) Instrcution NCQ/A-90-60 90*60 290 35 Used to mark characters on bullion jewelry, gifts and crafts NCQ/A-135-85 135*85 290 35 Each two imported linear guide line in X and Y direction, with better precision and longer useful life NCQ/A-200-110 200*110 290 40 NCQ/A-250-200 250*200 290 60 NCQ/Ad3-135-85 135*85 290 40 The head of the machine can turn 90 degree ahead,applicable to mark on curved surface like wheel