Flat Marking Machine,Flat and Cylindrical Marking Machine and more.

  without fiature can mark on mechanical parts,like the image show. computer controls marking needle to move the traces of the edited characters and graphs,meanwhile to strike the materials at a high frequency under the application of compressed air,thereby to form the needed characters and graphs. Marking Surface: surface or curved surface with flatness not exceeding 3mm Applicable Scope : Marking date,serial number ,data,etc. on big labels on transformer,machine tool ,injection moulding machine,also on mechanical parts,machine tool ,pump valves,electromechanical equipment,etc. Major Parts: Main machine,marking controller,marking software,fixture for large label  

  marked by flat marking machineNCQ/A The exhausting device is an innovative design of our factory,which can reduce the nosies and improve the amenity of operators. Marking surface: Flat surface or curved surface with flatness not exceeding 3mm Applicable Scope: Motor parts, mechanical parts, machine tools,hardware products, pumpvalves,electromechanical equipments,plastic products, labels (nameplate), etc. Major Parts: Main machine, pneumatic marking controller, pneumatic marking driver (software) Function Introduction: Labels can be marked semiautomatically with  the label fixture (optional); mechanical part can be marked  without the label fixture (some require simple fixtures that fit to the parts

  Four imported square straight channels are used to improve the marking quality and speed up the printing (generally only two channels) Marking points(cap of the needle) are made of special wear resistant materials by special process to improve the wear resistance and prolong the lifetime to tens of times. Marking Surface: surface or curved surface with flatness not exceeding 3mm Applicable Scope : Marking date,serial number ,data,etc. on big labels on transformer,machine tool ,injection moulding machine,also on mechanical parts,machine tool ,pump valves,electromechanical equipment,etc. Major Parts: Main machine,marking controller,marking software,fixture for large label  

  Major parts: main machine, flat and cylindrical controller, pneumatic marking driver(software optical disk), circumferential marking fixture. Applicable to motor parts, mechanical parts, machhine tools, hardware products, pump valve, steel tubes,ring flanges, electromechanical equipment, plastic products, labels, etc. Functions:Labels can be marked on cylinder materials(such as steel tubes, ring flanges) with circumferential marking fixture; mechanical parts can be marked without the label fixture. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V 50~60HzPneumatic pressure: 0.2-0.7MPa Atmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision: 0.02-0.05mmWorking environment: regular working environment

  AIO marking machine (Allin One) No need to connect with PC,as there is a touch screen on the controller,only need a memory card for storing the marking content. Major parts: main machine, flat and cylindrical controller, pneumatic marking driver(software optical disk), circumferential marking fixture. Applicable to motor parts, mechanical parts, machhine tools, hardware products, pump valve, steel tubes,ring flanges, electromechanical equipment, plastic products, labels, etc. Functions: Labels can be marked on cylinder materials(such as steel tubes, ring flanges) with circumferential marking fixture; mechanical parts can be marked without the label fixture. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V 50~60HzPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision:0.02-0.05mmWorking environment: regular working environment

  This type of marking machine can mark on flat and cylindrical surface.The applicable scope such as motor parts,mechanical parts,machine tools,hardware products,pump valves,steel tube,ring flange,etc. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V 50HzPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision: 0.02-0.05mmWorking environment: regular working environment

  With bigger marking area .Labels can be marked semiautomatically with the label fixture ;mechanical part can be marked without the label fixture.The exhausting device is an innovation design of our factory,whichh can reduce the noises and improve the amenity of operators. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V 50HPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision:0.02-0.05mmWorking environment: regular working environment

  This type is of NCQ/A ,the marking area is about 200mm*110mm,Each X and Y direction has two channels ,with better precision and longer useful life.The marking needles are made of tungsten steel,it also make sure the precision of marking quality. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V  50~60HzPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/min Energy consumption: 100W (excluding commputer and air compressor)Repeat precision: 0.02-0.05mmWorking environment: regular working environment

  Machines can be customized according to your particular requirements.The marking needles are made of tungsten steel,make sure the precision marking quality and with longer useful life. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V  60HzPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision: 0.02-0.05mmWorking environment: regular working environment

  With large marking area,can mark date,serial number,data,etc. on big labels ,transformer,machine tool ,injection moulding machine,also on mechanical part,pump valves,electromechanical equipment,etc. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V  50HzPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision:  0.02-0.05mmWorking environment: regular working environment

  Marking surface: surface or curved surface with flatness not exceeding 3mm Major components: main machine, marking controller, driver, fixture for large labels. Applicable to mark data, serial number, data, etc. on transformer, machine tool, injection mould machine, also on mechanical parts, machine tools, pump valves, electromechanical equipment, etc. Items Marking Area(mm2) Maximum height(mm) Weight(kg) NCQ/E-250-200 250*200 300 100 NCQ/E-320-270 320*270 300 115 NCQ/E-400-270 400*270 320 140 NCQ/E-500-320 500*320 320 155

   Marking surface: surface or curved surface with flatness not exceeding 3mm Marking materials: metals or nonmetals with hardness under HRC 550 Marking depth: 0.02-1mm(adjustable, relevant to marking materials) Major components: main machine, marking controller, driver, fixture for large labels. Applicable to mark data, serial number, data, etc. on transformer, machine tool, injection mould machine, also on mechanical parts, machine tools, pump valves, electromechanical equipment, etc.

  There is no restrictions to the size and height of the workpiece when marking on flat surface. Small or big workpiece,flat,cylindrical or conical surface,steel or plastic material can all be marked;marking needle can be turned freely;rotary fixture can be undergone either standing or lying. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V  50~60HzPneumatic pressure:0.2-0.7MPaAtmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision: 0.02-0.05mmWorking environment: regular working environment

  Two-axis rotary working ,weight of workpiece can be 10 kgs,there is no restrictions to the size and height of the workpiece when marking on flat surface. Head and lift of the machine can be turned easily. Marking surface: Flat ,cylindrical and conical surface Size of the workpiece: No restrictions to the size and height of the workpiece when marking on flat surface Major Parts: Main machine,flat and cylindrical marking controller ,marking software,rotary fixture Function Introduction: Small or big workpiece,flat ,cylindrical or conical surface,steel or paper material can all be marked ;marking needle can be turned freely;marking process can be undergone either standing or lying Applicable Scope :Motor parts,mechanical parts,machine tools,hardware products,pump valves,steel tubes,ring flange,electromechanical equipment,labels(nameplates),dial plate,etc.  

   Size of work pieces: no restricttions on the size and height of the work pieces when marking on flat surface. Applicable to motor parts, mechanical parts, machhine tools, hardware products, pump valve, steel tubes,ring flanges, electromechanical equipment, labels, dial plates, etc. Functions: Labels can be marked on small or big work pieces, flat, cylindricalor conical surfaces, steel or paper materials; marking needles can be turned freely; marking process can be undergone either when standing or lying. Items Marking Area Instruction Flat(mm2) Diameter of circle NCQ/D-135-85 135*85 5-200mm Two-axis rotary working,weight of workpieces under 10kgs NCQ/D-200-110 200*110 5-200mm NCQ/D-250-200 250*200 5-200mm NCQ/3D-135-85 135*85 5-260mm Three-axis rotary working,weight of workpieces under 20kgs NCQ/3D-200-110 200*110 5-260mm NCQ/3D-250-200 250*200 5-200mm

   Adotping four imported linear guide rails and two lifts make the machine run more steadily for a long time. Applicable scope: Motor part, mechanical part,machine tools,hardward products,pump valve,steel tube, ring flange, and plastic products, etc Marking Area: 135mm*85mm, 200mm*110mm,250mm*200mm The metal marking machine can transfer documents at the platform of CAD,Coredraw,with changing its format

  The marking area is bigger than NCQ/C-120-60,The needles are made of tungsten steel ,with longer useful life and more precision marking quality.Can mark serial number automatically. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V 50HzPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision: 0.02-0.05mmWorking environment: regular working environment

  Double chain lift ,with more extensive application scope ,more accurate,are used. Four imported square straight channels are used to improve the marking quality and speed up the printing.we promise you of excellent quality and prompt delivery. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)   Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V  50~60HzPneumatic  pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/min Energy consumption: 100W (excluding commputer and air compressor)Repeat precision: 0.02-0.05mmWorking environment: regular working environment

  It is used to mark on the workpiece which hard to move,Main machine can work through long cable wire far away from computer and control machine,mark on the body ,base plate,pillar and engine directly. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V  50HzPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision: 0.02-0.05mmWorking environment: regular working environment

  Semi-autonomous printing is realized by connecting the well designed flat label fixture to computers,and is easy to use as this is in line with the theories of human engineering of other similar marking machines. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V  50~60HzPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision: 0.02-0.05mmWorking environment: regular working environment

  We adopt four imported square straight channels ,double chain lifts to improve the marking quality and speed up the printing,with longer useful life.Marking needles are made of tungsten steel ,with longer useful life. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V 50~60HzPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision: 0.02-0.05mmWorking environment: regular working environment

  With three-axis rotary working ,Brand can be marked on cylindrical surface (such as steel tube,ring flang)with circumferential marking fixture;mechanical parts can be marked without the label fixture. Technical parameters: Marking content: numbers , characters, and graphsSize of characters: adjustableMarking depth: 0.02--1mm (adjustable, relevant to material)Marking speed:100-2500mm/minMarking materials: metals or non-metals with hardness under HRC55Power source: AC220V  50HzPneumatic pressure: 0.2-0.7MPaAtmosphere consumption: 25-40L/minEnergy consumption: 100W (excluding commputer and air compressor)Repeat precision: 0.02-0.05mmWorking environment: regular working environment

   Major parts: main machine, flat and cylindrical controller, pneumatic marking driver(software optical disk), circumferential marking fixture. Applicable to motor parts, mechanical parts, machhine tools, hardware products, pump valve, steel tubes,ring flanges, electromechanical equipment, plastic products, labels, etc. Functions:Labels can be marked on cylinder materials(such as steel tubes, ring flanges) with circumferential marking fixture; mechanical parts can be marked without the label fixture. Items Marking Area Instruction Flat(mm2) Diameter of circle NCQ/B-135 135*85 5-200mm Two-axis rotary working,weight of workpieces under 10kgs NCQ/B-200 200*110 5-200mm NCQ/B-250 250*200 5-200mm NCQ/3B-135 135*85 5-260mm Three-axis rotary working,weight of workpieces under 20kgs NCQ/3B-200 200*110 5-260mm NCQ/3B-250 250*200 5-260mm  

   Adotping four imported linear guide rails and two lifts make the machine run more steadily for a long time. This metal of marking machine can transfer documents at the platform of CAD, CorelDRAW, with changing its format. This kind of marking machine can be used to mark characters, graphs, serial numbers, VIN codes,on motor parts, mechanical parts, machine tools, hardware products, pump valves, steel tubes, ring flanges, and electronical equipments and dial plates. Major parts of the marking machine : main machine, flat and rotary marking controller, marking software, rotary fixture, label fixture( which is optional, used for marking nameplate)

  Pneumatic marking machine can be applied to mark on irregular materials, such as on gears,without flat fixture. Double chain lifts,with more extensive application scope,more accurate,are used(general marking machines use single chain lifts) Semi-autonomous printing is realized by connecting the well designed flat label fixture to computers,and easy to as this is in live with the theories of human engineering of other similar marking machine.If they have ,are not connected to .

   Capable to mark on the flat, cylindrical, and conical surfaces This kind of dial plate can be marked by our Multifunctional Marking Machines with the rotary fixture. Applicable to motor parts, mechanical parts, machhine tools, hardware products, pump valve, steel tubes,ring flanges, electromechanical equipment, labels, dial plates, etc. Labels can be marked on small or big work pieces, flat, cylindricalor conical surfaces, steel or paper materials; marking needles can be turned freely; marking process can be undergone either when standing or lying.

  Pneumatic marking machine can be applied to mark on mechanical parts. Adotping four imported linear guide rails and two lifts make the machine run more steadily for a long time Marking surface: Flat surface or curved surface with flatness not exceeding 3mm Applicable Scope: Motor parts, mechanical parts, machine tools,hardware products, pumpvalves,electromechanical equipments,plastic products, labels (nameplate), etc. Major Parts: Main machine, pneumatic marking controller, pneumatic marking driver (software) Function Introduction: Labels can be marked semiautomatically with the label fixture (optional); mechanical part can be marked  without the label fixture (some require simple fixtures that fit to the parts

  Marking surface: Flat surface or curved surface with flatness not exceeding 3mm Applicable Scope: Motor parts, mechanical parts, machine tools,hardware products, pumpvalves,electromechanical equipments,plastic products, labels (nameplate), etc. Major Parts: Main machine, pneumatic marking controller, pneumatic marking driver (software) Function Introduction: Labels can be marked semiautomatically with     the label fixture (optional); mechanical part can be marked  without the label fixture (some require simple fixtures that fit to the parts)

  Applicable to motor industry, such as mark serial number, manufacture data, name, and brand on the body, frameworks, base plate, pillar, engine and other big and heavy materials. Major parts: main machine, pneumatic marking control machine, pneumatic marking driver. Functions: Main machine can work through long cable wire far away computer and control machine and directly mark on the body, base plate, pillar and engine. Items Marking Area(mm2) Instruction NCQ/C-120-60 120*60 Mark on big and heavy work pieces NCQ/C-150-80 150*80 NCQ/C2-120-60 120*60 With magnet,marking on base plate, pillar of the car NCQ/C2-150-80 150*80 NCQ/C3-120-60 120*60 Lifted automatic through curved surface, marking on circular case NCQ/2C-120-60 120*60 Maring on the work pieces with complicated shape, marking labels with marking fixture NCQ/3C-100-15 100*15 Light weight, small volume and easy to move, small marking area

  Marking surface: Flat ,cylindrical and conical surface Size of the workpiece: No restrictions to the size and height of the workpiece when marking on flat surface Major Parts: Main machine,flat and cylindrical marking controller ,marking software,rotary fixture Function Introduction: Small or big workpiece,flat ,cylindrical or conical surface,steel or paper material can all be marked ;marking needle can be turned freely;marking process can be undergone either standing or lying Applicable Scope :Motor parts,mechanical parts,machine tools,hardware products,pump valves,steel tubes,ring flange,electromechanical equipment,labels(nameplates),dial plate,etc.

   Basic Principles: computer controls marking needle to move on the traces of the pre-edited characters and graphs,meanwhile to strike the materials at a high frequency under the application of compressed air ,thereby to form the needed characters and graphs Major Functions: software,applicable on windows 98/2000/XP/Vista platformas ,has strong editing functions,and easy to use ,capable to mark Chinese and English characters,arabic numerals and any other graphs,automatic marking serial number,international stand VIN code and scales. Applicable Scope: 1.Motor industry :marking manufacture serial number,date,name.,brand,etc.in the body ,framework,base plate,pillar,engine,commecting rod,cylinder piston,cylinder sleeve,etc. 2.Mechanical industry：marking on mechanical parts,machine tools,hardware products,steel tube,sleeve ,collar,roller,pump valve,ring flange,fastener. 3.Marking on apparatu,electromechanical instrument 4.Marking on plastic products Technical Parameters Marking contents: numbers,Chinese snd English characters,graphs Size of Characters: adjustable Marking depth:0.02--1mm(adjustable ,relevant to the material) Marking speed:100--2500mm/min Marking Materials: metals or nonmetals with hardness under HRC55 Marking Surface:flat or curved surface with flatness not exceeding 3 mm Power Source:AC220V±10% 50--60Hz Pneumatic Pressure:0.3--0.7MPa Atmosphere Consumption:25--40L/min Energy Consumption: 100W Repeat Precision: 0.02--0.05mm Working Environment: Regular working environment

  Size of work pieces: no restricttions on the size and height of the work pieces when marking on flat surface. Applicable to motor parts, mechanical parts, machhine tools, hardware products, pump valve, steel tubes,ring flanges, electromechanical equipment, labels, dial plates, etc. Functions: Labels can be marked on small or big work pieces, flat, cylindricalor and conical surfaces, steel or paper materials; marking needles can be turned freely; marking process can be undergone either when standing or lying.