Contactor,Switching Power Supply,Push Button Switch and more.

  Model: C213-4 / C223-4Voltage: 110~130VCurrent: 16A / 32APole: 2P+EGrade: IP44 Model: C213 / C223Voltage: 220~240VCurrent: 16A / 32APole: 2P+EGrade: IP44 Model: C214 / C224Voltage: 380~415VCurrent: 16A / 32APole: 3P+EGrade: IP44 Model: C215 / C225Voltage: 220~380V / 240~415VCurrent: 16A / 32APole: 3P+N+EGrade: IP44

  1. Body and door manufactured in 1.5 mm sheet steel. 2. Flat mounting plate in 1.5 mm sheet steel. FINISH NANTE standard cycle thermosetting epoxypolyester powder coating. 3. Case and door RAL 7032 textured finish. 4. Mounting plate in RAL 2004 smooth finish. PROTECTION DEGREE 5. IP 55 to EN60 529 NEMA 4. PACKING Boxes are complete with: 6. 2 zincpassivated rails to be fixed on the door. 7. Mounting plate. 8. Gland plate and gasket. 9. Package with hardware for earth connection and screws to mount all components. 10. Locking system with 3 mm double bar key.

  Some types as follows:LSM-SP-4, LSM-SP-6, LSM-SP-8, LSM-SP-12 (Clear Installation) LSM-SI-4, LSM-SI-6, LSM-SI-8, LSM-SI-12 (Secret Installation)

  1) Unique and scientific design, perfect for operation, safely and reliably. Beautiful performance become decoration with inner car that show very honor. 2) It is suitable to various types cars. 3) Design and produced in accordance with GB standard. 4) Digital technology and single molectron make, performance steady and reliable. 4) Additional functions of two sets switched of light control in the panel. Design perfectly. 5) Function: Aux, yelp, hi-lo, wail-1, wail-2, siren, horn, super-siren. Yelp relay. 6) Tool, Build in LID display, sound amplifying.Type including: MS-190, MS-290, MS-390

  SEL series lightning rod is a kind of product, which matches GH model ring type steel lightning rod and ZG model ring type reinforced concrete lightning rod.

  BYW series surge arrestor is applied in satellite TV high frequency, satellite signal receiver, microwave machine station, the feed system of moving communication, which is to avoid the damage to the receiving equipment caused by over voltage of feed inductance.

  BY4 type SPD is series surge protective device (protector in short) is applied in A.C 50/60 Hz, <=380V electric power system such as TT , IT ,TN-S , TN-C and TN-C-S, and used at the equipotential connection of LPZ0A and LPZ31 zone or LPZ0B and LPZ1 zone, which protects the electric network shocked by the thunder or surge over voltage.The protector can be made connecting with remote signaling contact, which is a normal open contact. If one or more of modular of the protector is in malfuction, the contact will be closed, and sending the malfunction signal. The rated value of remote signaling contact is AC36V, 1A.

  BY2 series surge protective device (protector in short) is applied in A.C 50/60 Hz, <=380V in the following electric power system, such as TT, IT, TN-S, TN-C and TN-C-S, applied in the equipotential connection of the joint of LPZ0A and LPZ1 or LPZ0B and LPZ1, which protects the electric net shocked by the thunder or surge over voltage. This protector also can be connected with voltage limitation type SPD to combine “3+1”, used in the TT system. And it’s not applied in the system overdue short circuit current over rated breaking continuous value.

  Electrical Life ≥30000 hours Brightness: 40~60cd/sq.m. Permitted Voltage: 20% go up or down Dielectric Strength: 2.5kv Light Color: Red, green, yellow, white, blue Insulation: ≥50MΩ

  1) The installation hole's diameter of the series pushbutton: Φ16mm 2) Every pushbutton can possess from one to three switch units 3) The front shape: Round (Φ18mm), Rectangular (18x24mm), Square (18x18mm) 4) Many types are available: pilot lamp, pushbuttons, illuminated pushbuttons, selector switches, key lock switches, emergency pushbutton. 5) Use the gold-clad silver contact or silver contact. 6) NO and NC block are divided completely. The switches are structured compactly and operated quickly and gently. 7) IP Protection Degree: IP40, IP67

  1) The installation hole's diameter of the series pushbutton: 16mm. 2) Every pushbutton can possess from one to four switch units. 3) Use the gold-clad silver contact or silver contact. 4) The front shape: Round (Φ18mm) Square (18x18mm) Rectangular (18x24mm) 5) Many types are available: pilot lamp, pushbutton, illuminated pushbutton, selector switch, and key lock switch. 6) IP Protective Degree: IP40, IP65, IP67

  1) The installation hole's diameter of the series pushbutton: 16mm. 2) Every pushbutton can possess from one to four switch units. 3) Use the gold-clad silver contact or silver contact. 4) The front shape: Round (Φ18mm) Square (18x18mm) Rectangular (18x24mm) 5) Many types are available: pilot lamp, pushbutton, illuminated pushbutton, selector switch, and key lock switch. 6) IP Protective Degree: IP40, IP65, IP67

  The switches are structured compactly and operated quickly and gently. The lighting unit uses the super brightness LED. It's extensive to used in each field of work and factory. 1) The installation hole diameter of the series pushbutton: Φ16mm. 2) Every pushbutton posses from one to two standard quick-break switch units. 3) Use the gold-clad silver contact or silver contact. 4) The front shape: Round (Φ18mm), Square type (18x18mm), Rectangular (18x24mm). 5) Many types are available: Pilot lamp, pushbutton, illuminated pushbutton, selector switch, key lock switch, emergency pushbutton and buzzer. 6) IP Protection Degree: IP40, IP65, IP67

  Features: 1) Max. current/voltage rating with resistive load: 2A 48 VDC 2) Insulation resistance: 1 000 MW min. at 500 VDC 3) Initial contact resistance: 50mW max. at 1A 2V 4) Dielectric strength: 2, 000Vrms, 50Hz mini. 5) Electrical life: 100, 000 cycles at full load 6) Mechanical life: 1, 000, 000 cycles 7) Electrical function: OFF - ON 8) Torque: 5 Nm min. - 14 Nm max. applied to nut 9) Panel thickness: 1 ~ 6mm max. 10) Operating temperature: - 20 ~ 55oC 11) Degrees of protection: IP40 IP 65 12) Contacts: Silver-plated brass 13) Bushing: nickel-plated brass, gold-plated brass, stainless steel 14) Curved actuator: nickel-plated brass, gold-plated brass, stainless steel 15) Screw terminals 16) Panel cut-out: dia. 16. 2mm

  180W Quad Output Switching Power SupplyFeatures: 1) Low cost, high reliability 2) 105oCoutput capacitor 3) International AC input range 4) High efficiency, low working temperature 5) Soft-start circuit, limiting AC surge current 6) Short circuit, overload protected 7) Compact size, light weight 8) 100% full load burn-in test 9) Built in EMI filter, low ripple noise 10) Weight: 1.28kg Specifications: 1) Input voltage: 88 - 132V AC, 176 - 264V AC (selected by SW.) 2) Input frequency: 47 - 63Hz 3) Inrush current: cold start, 20A / 115V, 40A / 230V 4) Overload protection: 105 - 135% output shutdown 5) Setup, rise, hold up time: 200ms, 50ms, 16ms 6) Withstand voltage: a) I/P-O/P: 1.5kV (1min.) b) I/P-FG: 1.5kV (1min.) 7) Working temp: 0  5 0oC@100%, -10oC@80%, 60oC@60% 8) Safety standard: design refers to UL 1012 requirement 9) EMC standard: design refers to FCC part 15 class A 10) Connection: 9P / 9.5mm pitch terminal block Type No | Output | Tol. | R&N | Eff. SKQ-180 | 5V, 1-10A | +2% | 80mV | 80% SKQ-180 | 12V, 0. 2-2A | +6% | 150mV | 80% SKQ-180 | 24V, 0. 5-5A | +5% | 200mV | 80% SKQ-180 | -12V, 0. 1-1A | +8% | 180mV | 80% Packing: 8pcs/ctn G.W.: 16.5kg

  50W Triple Output Switching Power SupplyFeatures: · High efficiency, high reliability, low cost · AC input range selected by swith · 100% full load burn-in test · Protections: Short circuit/ Over load · Cooling by free air convection · Fixed switching frequency at 24KHz · 1 year warranty · Dimensions: 159*97*38mm(L*W*H) Speciaication 1)INPUT · Voltage Range: 85~132 VAC / 170~264 VAC47-63Hz; selected by switch 240~370VDC · AC Current: 1. 6A/115 V0. 8A/ 230 V · Efficiency: 66%(SKT-50A); 69%(SKT-50B); 71%(SKT-50C); 72%(SKT-50D) · Inrush Current: Cold start 20A/115V40A/230V · Leakage: Current <0. 5mA/240VAC 2)PROTECTION · Over Load: 105%~150% Protection type: Shut down o/p voltage, recovers automatically after fault condition is removed. 3)ENVIRONMENT · Working Temp., Humidity: -10º C~+60º C; 20%~90 %RH · Storage Temp., Humidity: -20º C~+85º C; 10%~95 %RH · Vibration: 10~500Hz, 2G 10min. /1 cycle, period for 60min, each along X, Y, Z axes 4)SAFETY AND STANDARD · Withstand Voltage I/P-O/P: 1. 5KVACI/P-FG: 1. 5KVACO/P-FG: 0. 5KVAC · Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC · Safety Standard: Design refer to UL1012 5)OUTPUT · Model: SKT--50A | SKT--50B | SKT--50C | SKT--50D CH1 | -CH2 | CH3 | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 · DC Voltage: 5V |12V -5V | 5V | 12V -12V| 5V |15V -15V|5V |12V |24V · Voltage Tolerance: ± 2% | ± 5% | ± 5% | ± 2% | ± 5% | ± 5% | ± 2% | ± 5% | ± 5% | ± 2% | ± 6% | ± 6% · Rated Current: 7A | 1A | 1A | 5A | 1A | 1A | 4A | 1A | 1A | 3A | 1A | 1A · Current Range: 0. 6-7A | 0. 2-1A | 0. 2-1A | 0. 6-5A | 0. 2-1A | 0. 2-1A | 0. 6-4A | 0. 2-1A | 0. 2-1A | 0. 6-4A | 0. 2-1. 2A | 0. 2-1. 2A · Rated Power: 52W | 52W | 52W | 49W | 49W | 49W | 50W | 50W | 50W | 51W | 51W | 51W · Ripple & Noise: 100 mVp-p 120 mVp-p · DC Adjustment Range CH1: -5%, +10% · Setup, Rise, Hold Time 200ms, 100ms, 16ms at full load

  40W Triple Output Switching Power SupplyFeatures: · High efficiency, high reliability · Universal AC input / full range · 100% full load burn-in test · Protections: Short circuit/ Over load / Over voltage · Cooling by free air convection · Fixed switching frequency at 40KHz · 2 years warranty · Dimension: 129*98*38mm (L*W*H) Specification 1)INPUT · Voltage Range: 85~264 VAC / 47~63 Hz; 120~370VDC · AC Current: 1. 2A/115 V0. 7A/ 230 V · Efficiency: 72%/115VAC · Inrush Current: Cold start 20A/115V40A/230V · Leakage Current: <3. 5mA/240VAC 2)PROTECTION · Over Load: 105%~150% /115VAC Protection type: Fold back current limiting, recovers automatically after fault ondition is removed · Over Voltage: 5V: 115%~135% Protection tyoe: hiccup mode, recovers automatically after fault ondition is removed 3)ENVIRONMNET · Working Temp., Humidity: -10º C~+60º C; 20%~90 %RH · Storage Temp., Humidity: -20º C~+85º C; 10%~95 %RH · Vibration: 10~500Hz, 2G 10min. /1cycle, period for 60min, each along X, Y, Z axes 4)SAFETY AND STANDATD · Withstand Voltage: I/P-O/P: 3KVACI/P-FG: 1. 5KVACO/P-FG: 0. 5KVAC · Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC · Safety Standard: Design refer to CSA 950, (UL1950, IEC950, TUV EN60950) · EMC Standard: Design refer to EN55022 (CISPR22), EN61000-3-2, -3, EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204 5)OUTPUT · Model: SKT-40A | SKT-40B | SKT-40C CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 · DC Voltage: 5V | 12V | -5V | 5V | 12V | -12V | 5V | 15v | -15V · Voltage Tolerance: ± 2% | ± 6% | ± 8% | ± 2% | ± 6% | ± 8% | ± 2% | ± 6% | ± 6% · Rated Current: 3A | 2A | 0. 5A | 3A | 2A | 0. 5A | 3A | 1. 5A | 0. 5A · Current Range: 0. 6-5A | 0. 2-3A | 0. 1-1A | 0. 6-5A | 0. 2-3A | 0. 1-1A | 0. 6-5A | 0. 2-2A | 0. 1-1A · Rated Power: 41. 5W | 41. 5W | 41. 5W | 45W | 45W | 45W | 45W | 45W | 45W · Ripple & Noise: 100 mVp-p | 120 mVp-p | 100 mVp-p | 100 mVp-p | 120 mVp-p | 120 mVp-p | 100 mVp-p | 120 mVp-p | 120 mVp-p · DC Adjustment Range CH1: -5%, +10% · Setup, Rise, Hold Time 800ms, 50ms, 60ms/230VAC1. 6ms, 50ms, 16ms/115VAC at full load

  60W Dual Output Switching Power SupplyFeatures: 1) Low cost, high reliability; 2) 105oC output capacitor; 3) International AC input range; 4) High efficiency, low working temperature; 5) Soft-start circuit, limiting AC surge current; 6) Short circuit, overload, over voltage protected; 7) Compact size, light weight; 8) 100% full load burn-in test; 9) Built in EMI filter, low ripple noise; 10) Weight: 550g Specifications: 1) Input voltage: 85 - 264V AC; 120 - 370V DC 2) Input frequency: 47 - 63Hz 3) Inrush current: Cold start, 25A / 115V, 50A / 230V 4) Overload protection: 105 - 150% output pulsing mode 5) Over voltage protection: CH1: 5. 75 - 6. 75V of output voltage 6) Setup, rise, hold up time: A) 115V AC: 800ms, 50ms, 10ms B) 230V AC: 300ms, 50ms, 80ms 7) Withstand voltage: A) I/P-O/P: 3kV (1min. ) B) I/P-FG: 1. 5kV (1min. ) 8) Working temp: 0 - 45oC@100%, -10oC@80%, 60oC@60% 9) Safety standard: UL 1012, TUV EN60950 10) EMC standard: EN55022 class B, IEC801-2, 3, 4, 5, EN60555-2, 3 11) Connection: 7P / 9. 5mm pitch terminal block Type No | Output | Tol. | R&N | Eff. SKD-60A | 5V, 0. 3-6A | +2% | 75mV | 73% SKD-60A | 12V, 0. 2-4A | +6% | 150mV | 73% SKD-60B | 5V, 0. 3-6A | +2% | 75mV | 76% SKD-60B | 24V, 0. 2-2. 2A | +5% | 150mV | 76% SKID-60B | Same spec. As D-60B except the output is isolated, SKID-60B | CE/SAFETY is pending. Packing: 30pcs/ctn G. W.: 17. 5kg Volume: 1. 0cuft

  30W Dual Output Switching Power SupplyFeatures: 1) Low cost, high reliability 2) 105oC output capacitor 3) International AC input range 4) High efficiency, low working temperature 5) Soft-start circuit, limiting AC surge current 6) Short circuit, overload protected 8) Compact size, light weight 9) 100% full load burn-in test 10) Built in EMI filter, low ripple noise 11) Weight: 400g Specifications: 1) Input voltage: 85 - 132V AC, 176 - 264V AC (selected by SW.) 2) Input frequency: 47 - 63Hz 3) Inrush current: cold start, 15A / 115V, 30A / 230V 4) Overload protection: 105 - 150% output foldback limiting 5) Setup, rise, hold up time: 200ms, 50ms, 30ms 6) Withstand voltage: a) I/P-O/P: 1.5kV (1min.) b) I/P-FG: 1.5kV (1min.) 7) Working temp: 0-50oC@100%, -10oC@80%, 60oC@60% 8) Safety standard: design refers to UL 1012 requirement 9) EMC standard: design refers to FCC part 15 J 10) Connection: 7P/9.5mm pitch terminal block Type No | Output | Tol. | R&N | Eff. SKD-30A | 5V, 0. 5-4A | +2% | 50mV | 72% SKD-30A | 12V, 0. 1-1A | +3, -7% | 100mV | 72% SKD-30B | 5V, 0. 5-4A | +2% | 50mV | 74% SKD-30B | 24V, 0. 1-1A | +3, -5% | 100mV | 74% SKID-30B | Same spec. as D-30B except the output is isolated Packing: 45pcs/ctn G.W.: 19.0kg Volume: 1.2cuft

  240W Single Output Switching Power SupplyFeatures: ·High efficiency, high reliability ·Auto switched 88-264VAC input ·Protections: Short circuit / Over load / Over voltage ·Forced air cooling by built-in DC fan ·Built-in cooling fan ON-OFF control ·Fixed switching frequency at 75KHz ·2 years warranty ·Dimension: 190*93*65mm (L*W*H) Specification: 1) INPUT ·Voltage Range: 88-132VAC / 176-264VAC auto switched, 248-370VDC; 47-63Hz ·AC Current: 5A/115VAC  2.5A/230VAC ·Inrush Current: Cold start 18A/115V  36A/230V ·Leakage Current: <2mA/240VAC 2) PROTECTION ·Over Load: 105%-135%; Shut down o/p voltage, recovers automatically after fault condition is removed. ·Over Voltage: 115%-135%; Hiccup mode, recovers automatically after fault condition is removed. ·Fan Control: RT1≥40ºC FAN ON, ≤35ºC FAN OFF, ≥70ºC output shutdown 3) ENVIRONMENT ·Working Temp. & Humidity: -10ºC~+60ºC; 20%~90% RH. ·Storage Temp. & Humidity: -20ºC~+85ºC; 10%~95% RH. ·Vibration: 10~500Hz, 2G 10min./1 cycle, period for 60min, each along X, Y, Z axes. 4) SAFETY STANDARDS ·Withstand Voltage; I/P-O/P: 3KVAC; I/P-FG: 1.5KVAC; O/P-FG: 0.5KVAC ·Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100MΩ/500VDC ·Safety Standards: Design refer to UL1950, TUV, EN60950 ·EMC Standards: Design refer to EN55022, EN61000-3-2,-3, EN61000-4-2,3,4,5,6,8,11; ENV50204 5)Type No | Output | Tol. | R&N | Effi. SKS-240-5 | 5V, 40A | +2% | 150mV | 78% SKS-240-7. 5 | 7. 5V, 30A | +2% | 200mV | 80% SKS-240-12 | 12V, 18A | +1% | 150mV | 82% SKS-240-15 | 15V, 15A | +1% | 150mV | 83% SKS-240-24 | 24V, 10A | +1% | 180mV | 84% SKS-240-30 | 30V, 8A | +1% | 180mV | 85% SKS-240-48 | 48V, 5A | +1% | 240mV | 87%

  LP1-D series DC operated AC contactor is suitable for use in the circuits up to rated voltage 660V AC 50Hz or 60Hz,and in rated current 9-95A in AC-3/380V load circuits. For remote controlling circuit making, breaking and frequent starting AC motors. It can be also combined with the auxiliary contact group. air delayer, thermal relay devices etc.

  GMC series AC contactor is suitable for using in the circuit up to the rated voltage 660V AC 50HZ or 60HZ, rated current up to 95A, for making, breaking, frequently starting & controlling the AC motor. Combined with the auxiliary contact block, timer delay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, and star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The contactor is produced according to IEC947-2, VDE0660 & BS5452.

  3TF series AC contactors are suitable in electrical system with AC 50/60Hz, rated operational voltage up to 660V. In AC-3 usage, rated operational voltage up to 380V, rated operational current up to 630A to make or break remote motors or system. They can form electromagnetic starters with suitable thermal overload relays 3UA series to protect system and motors against overload or phase-failure. They are made according to IEC947-2, BS5424 & VDE0660.

  The contactor is suitable for using in he circuits up to the rated voltage 660V AC 50Hz or 60Hz, rated current 630A, for making and breaking, and for frequent starting and controlling the motor, After combined with the mechanical interlocking device, it becomes 3TD Berries convertible contactor for Controlling, breaking and Reversing of the motor. The products comply with IEC947 & VDE0660.

  LC1-F series AC contactor is applicable in the circuits up to the rated voltage 1000v AC 50Hz or 60Hz,rated current 780A,for long distance breaking circuit and frequently starting or control the motor. It also can be used for the control of distribution circuits of rated current from 200A to 1600A.

  The OWS Series of Weather protected isolating Switches is a robust range of switches suitable for virtually any external application.A safety feature for mounting switches to metal structures is the insulating caps that cover base mounting screws to totally protect them from any live cables.Each units supplied with screwed conduit plugs and screwed reducers for easy connection to 25mm or 20mm conduits and screw caps. Screw caps must be installed to ensure IP Rating.

  Voltage limiting type SPD combined with voltage switching type SPD is formed the Group SPD, which is suiting to A.C 50/60 Hz, 380V and under 380V voltage’s electric power system and protects all the distribution systems shocked by the thunder or surge over voltage. Using the combination SPD between phase line and earth line in the distribution system, which not only eliminates the power-frequency continuous current, but also over comes the leakage tripping which results from the bad performance of MOV. So SPD is suitable to all the distribution system, which is with the protection of surplus current. Since the voltage switching SPD is connected between zero line and earth line, at the same time with its much higher maximum continuous operating voltage and enough impulse current capacity, it will have its peculiar superiority when used in TT system.

  1) The installation hole's diameter of the series pushbutton:16mm. 2) Every pushbutton can possess from one to four switch units. 3) Use the gold-clad silver contact or silver contact. 4) The front shape: Round (Φ18mm) Square (18x18mm) Rectangular (18x24mm) 5) Many types are available: pilot lamp, pushbutton, illuminated pushbutton, selector switch, and key lock switch. 6) IP Protective Degree: IP40, IP65, IP67

  35W Single Output Switching Power Supply Features: 1) Low cost, high reliability 2) 105oC output capacitor 3) International AC input range 4) High efficiency, low working temperature 5) Soft-start circuit, limiting AC surge current 6) Short circuit, overload protected 7) Compact size, light weight 8) 100% full load burn-in test 9) Built in EMI filter, low ripple noise 10) Weight: 400g Specifications: 1)  Input voltage: 85 - 132V AC / 170 - 264V DC (selected by SW.) 2)  Input frequency: 47 - 63Hz 3)  Inrush current: cold start, 15A / 115V, 30A / 230V 4)  Overload protection: 105 - 150% output fold-back limiting 5)  Setup, rise, hold up times: 200ms, 100ms, 30ms 6)  Withstand voltage: a) I/P-O/P: 1.5kV (1min.) b) I/P-FG: 1.5kV (1min.) 7)  Working temp.: 0 - 50oC@100%, -10oC@80%, 60oC@60% 8)  Safety standard: design refers to FCC part 15J 9)  EMC standard: EN55022 class B, IEC801-2, 3,4,5, EN60555-2, 3 10) Connection: 5P / 9.5mm pitch terminal block Type No | Output | Tol. | R&N | Effi. SKS-35-5 | 5V, 7A | + 2% | 75mV | 70% SKS-35-12 | 12V, 3A | + 1% | 100mV | 76% SKS-35-15 | 15V, 2. 4A | + 1% | 100mV | 78% SKS-35-24 | 24V, 1. 5A | + 1% | 100mV | 78% Packing: 45pcs/ctn G.W.: 19.0kg Volume: 0.9cuft

  LC1-D series AC Contactor is suitable for using in the circuits up to the rated voltage 660v AC 50Hz,rated current up to 95A,for making, breaking, frequently starting & controlling the AC motor. Combined with the auxiliary contact block, timer delay & machine-interlocking contactor, star-delta starter. With the thermal relay, it is combined into electromagnetic starter. The Contactor is produced according to IEC158-1, VDE0660 & BS5452.