Stretch Film Making Machine
Our company produce different kinds of machine according to the different width you need like 500mm,600mm,1000mm etc also single and double side sticky as you need. This series unit is mainly used in producing the polyethylene plastic film for unidirectional stretch (stretching film, twines membrane) as well as fresh film. The film can achieve the effect which is one-side and two-side sticks. Therefore it applies in building material, hardware fitting packing widely.

  Main characteristic of the machine: 1、  It profits advanced technology from aboard and manufacture by absorption, improvement, innovation. 2、  It is entire frequency conversion control, movement stable, highly effective and the low energy consumption. 3、  The product adopts the craft of one time forming. 4、  It can produce two-side sticks for stretching film. 5、  The special side material rollout element by round-trip.   Unit introduction This series unit is mainly used in producing the polyethylene plastic film for unidirectional stretch (stretching film, twines membrane) as well as fresh film. The film can achieve the effect which is one-side and two-side sticks. Therefore it applies in building material, hardware fitting packing widely. The screw of unit adopts 38CRNOALA alloy steel. It manufactured by nitric and precise processing so that it is highly hardness and durable long time. Temperature controls adopts advanced automatic control system and the T mold adopts the multi- spots adjustment. They could cause the film thickness to be evener. The cooling system adopts the circulating water cool and it cooling effect is good. The rollout installment adopts the friction type of rollout and has the cutting edge installment and side material rollout element by round-trip. This causes the film which rollout to be neater. Main Technical Parameter     Mode SLW-500 Double-layers SLW-600 Double-layers SLW-1000 Double layers SLW-1200 Double layers Screw diameter 50mm*2 55mm*2 60mm*2 65mm*2 L/D ratio 28:1 28:1 28:1 28:1 Screw Barrel Material 38Crmola 38Crmola 38Crmola 38Crmola Die width 650mm 750mm 1250mm 1450mm Film width 500mm 600mm 500---1000mm 500---1200mm Film thickness 0.015--0.05mm 0.015--0.05mm 0.015--0.05mm 0.015--0.05mm Roll diameter 300mm 300mm 300mm 300mm Output 15--30kg/h 20--40kg/h 50--70kg/h 80--100kg/h Main motor power 6*2 kw 7.5*2 kw 11*2 kw 15*2 kw Heating Power 20kw 30kw 45kw 65kw Overall dimension L*W*H 4800* 1800 *2600mm 4800* 2000 *2600mm 4800 *2600* 2600mm 4800 *3000* 2600mm Total weight 3200kg 3500kg 4500kg

  Main characteristic of the machine: 1、  It profits advanced technology from aboard and manufacture by absorption, improvement, innovation. 2、  It is entire frequency conversion control, movement stable, highly effective and the low energy consumption. 3、  The product adopts the craft of one time forming. 4、  It can produce two-side sticks for stretching film. 5、  The special side material rollout element by round-trip.   Unit introduction This series unit is mainly used in producing the polyethylene plastic film for unidirectional stretch (stretching film, twines membrane) as well as fresh film. The film can achieve the effect which is one-side and two-side sticks. Therefore it applies in building material, hardware fitting packing widely. The screw of unit adopts 38CRNOALA alloy steel. It manufactured by nitric and precise processing so that it is highly hardness and durable long time. Temperature controls adopts advanced automatic control system and the T mold adopts the multi- spots adjustment. They could cause the film thickness to be evener. The cooling system adopts the circulating water cool and it cooling effect is good. The rollout installment adopts the friction type of rollout and has the cutting edge installment and side material rollout element by round-trip. This causes the film which rollout to be neater. （Main Technical Parameter） Model: SLW-600double-side sticky SLW-1000 double-side sticky Screw Diameter 55mm 60mm L/D ratio 28：1 28:1 Screw Barrel Material 38CRMOLA 28CRMOLA Die width 750mm 1250mm Film Width 600mm 1000mm Thickness 0.015-0.05mm 0.015-0.05mm Rollout Diameter 300mm 300mm Output 30kg/h 50kg/h Main Motor Power 11kw 15kw Heating Power 15kw 25kw Overall dimension: 6000x1500 x2500mm 6000x2000 x2500mm Total Weight 3000kg 4000kg

  Main characteristic of the machine: 1、  It profits advanced technology from aboard and manufacture by absorption, improvement, innovation. 2、  It is entire frequency conversion control, movement stable, highly effective and the low energy consumption. 3、  The product adopts the craft of one time forming. 4、  It can produce two-side sticks for stretching film. 5、  The special side material rollout element by round-trip.   Unit introduction This series unit is mainly used in producing the polyethylene plastic film for unidirectional stretch (stretching film, twines membrane) as well as fresh film. The film can achieve the effect which is one-side and two-side sticks. Therefore it applies in building material, hardware fitting packing widely. The screw of unit adopts 38CRNOALA alloy steel. It manufactured by nitric and precise processing so that it is highly hardness and durable long time. Temperature controls adopts advanced automatic control system and the T mold adopts the multi- spots adjustment. They could cause the film thickness to be evener. The cooling system adopts the circulating water cool and it cooling effect is good. The rollout installment adopts the friction type of rollout and has the cutting edge installment and side material rollout element by round-trip. This causes the film which rollout to be neater. （Main Technical Parameter） Model: SLW-600double-side sticky SLW-1000 double-side sticky Screw Diameter 55mm 60mm L/D ratio 28：1 28:1 Screw Barrel Material 38CRMOLA 28CRMOLA Die width 750mm 1250mm Film Width 600mm 1000mm Thickness 0.015-0.05mm 0.015-0.05mm Rollout Diameter 300mm 300mm Output 30kg/h 50kg/h Main Motor Power 11kw 15kw Heating Power 15kw 25kw Overall dimension: 6000x1500 x2500mm 6000x2000 x2500mm Total Weight 3000kg 4000kg

  Main characteristic of the machine: 1、  It profits advanced technology from aboard and manufacture by absorption, improvement, innovation. 2、  It is entire frequency conversion control, movement stable, highly effective and the low energy consumption. 3、  The product adopts the craft of one time forming. 4、  It can produce two-side sticks for stretching film. 5、  The special side material rollout element by round-trip.   Unit introduction This series unit is mainly used in producing the polyethylene plastic film for unidirectional stretch (stretching film, twines membrane) as well as fresh film. The film can achieve the effect which is one-side and two-side sticks. Therefore it applies in building material, hardware fitting packing widely. The screw of unit adopts 38CRNOALA alloy steel. It manufactured by nitric and precise processing so that it is highly hardness and durable long time. Temperature controls adopts advanced automatic control system and the T mold adopts the multi- spots adjustment. They could cause the film thickness to be evener. The cooling system adopts the circulating water cool and it cooling effect is good. The rollout installment adopts the friction type of rollout and has the cutting edge installment and side material rollout element by round-trip. This causes the film which rollout to be neater. （Main Technical Parameter） Model: SLW-600double-side sticky SLW-1000 double-side sticky Screw Diameter 55mm 60mm L/D ratio 28：1 28:1 Screw Barrel Material 38CRMOLA 28CRMOLA Die width 750mm 1250mm Film Width 600mm 1000mm Thickness 0.015-0.05mm 0.015-0.05mm Rollout Diameter 300mm 300mm Output 30kg/h 50kg/h Main Motor Power 11kw 15kw Heating Power 15kw 25kw Overall dimension: 6000x1500 x2500mm 6000x2000 x2500mm Total Weight 3000kg 4000kg

   Main characteristic of the machine: 1、  It profits advanced technology from aboard and manufacture by absorption, improvement, innovation. 2、  It is entire frequency conversion control, movement stable, highly effective and the low energy consumption. 3、  The product adopts the craft of one time forming. 4、  It can produce two-side sticks for stretching film. 5、  The special side material rollout element by round-trip.   Unit introduction This series unit is mainly used in producing the polyethylene plastic film for unidirectional stretch (stretching film, twines membrane) as well as fresh film. The film can achieve the effect which is one-side and two-side sticks. Therefore it applies in building material, hardware fitting packing widely. The screw of unit adopts 38CRNOALA alloy steel. It manufactured by nitric and precise processing so that it is highly hardness and durable long time. Temperature controls adopts advanced automatic control system and the T mold adopts the multi- spots adjustment. They could cause the film thickness to be evener. The cooling system adopts the circulating water cool and it cooling effect is good. The rollout installment adopts the friction type of rollout and has the cutting edge installment and side material rollout element by round-trip. This causes the film which rollout to be neater. （Main Technical Parameter） Model: SLW-600double-side sticky SLW-1000 double-side sticky Screw Diameter 55mm 60mm L/D ratio 28：1 28:1 Screw Barrel Material 38CRMOLA 38CRMOLA Die width 750mm 1250mm Film Width 600mm 1000mm Thickness 0.015-0.05mm 0.015-0.05mm Rollout Diameter 300mm 300mm Output 30kg/h 50kg/h Main Motor Power 11kw 15kw Heating Power 15kw 25kw Overall dimension: 6000x1500 x2500mm 6000x2000 x2500mm Total Weight 3000kg 4000kg