Sell DSN-Mass FlowMeter

Specifications:

Flow Range (equivalent N2): 0 ~ 5,10,20,30,50,100,200,300,500 SCCM;

                            0 ~ 1,2,3,5,10,20,30 SLM

Accuracy: ± 1% FS;

Repeatability: ± 0.2% FS

Response Time: electrical characteristics <10sec gas properties <1 ~ 4sec

Linearity: ± (0.5 ~ 1)% FS

Pressure Coefficient: 0.05 ~ 0.3MPa

Pressure: 3,10 MPa;

Temperature Range: 5 ~ 45 ℃

Set Point Signal and Flow Output Signal:from 0 to 5 VDC

power supply: +15V 500mA,-15V 500mA (input impedance greater than 100K,output

             current is not greater than 3mA)

Electrical Connector: D14pin

size: 130 * 28 * 121mm

Weight: about 1.0kg

interface Size:

Swagelok: Φ3 .Φ6 .Φ10 .1 / 4 " . 3 / 8 "....

VCR connector: 1 / 4" . 3 / 8 ". 1 / 8 "........

    Thermal gas mass flow meter that Mass Flow Meter (abbreviated as MFM) DSN series is a new type of gas flow measurement instruments, different from other gas flow meter does not require amendments to the temperature and pressure, direct measurement of the quality of the gas flow, a sensor can be Do range from very low to high range. It is suitable for a single fixed ratio of gas and multi-component gas measurement.

    Thermal gas mass flow meter is used to measure and control the quality of the gas flow of new instruments. Can be used in petroleum, chemical, iron and steel, metallurgy, power, light industry, medicine, industry and environmental protection of air, hydrocarbon gases, flammable gases, flue gas monitoring.

    Characterized by high reliability and repeatable measurement of high-precision small loss without moving parts than a wide-range speed and do not respond to the temperature and pressure compensation

applications in the industrial pipeline gas mass flow measurement

chimney exhaust gas flow rate measurement of Calciner

flue gas flow measurement of gas in the process of measuring the flow of air compressed air flow measurement

Road and a half-chip manufacturing process gas flow measurement

pollution Water in gas flow measurement

heating ventilation and air-conditioning systems in the gas flow measurement

flux recovery system of gas flow measurement

combustion in the boiler combustion gas flow measurement

natural gas, flare gas, hydrogen gas, etc.

Beer production of carbon dioxide gas flow measurement