Offer List

  CPR35 Specification ◆ Capacities:50kg ◆ Rated Output: 1.5mV/V±5% ◆ Zero Balance: ±1%F.S. ◆ Creep: 0.1%F.S./30min ◆ Non-linearity: 0.1%F.S. ◆ Hysteresis: 0.1%F.S. ◆ Repeatability: 0.1%F.S. ◆ Temp. Effect On Output: 0.1%F.S./10℃ ◆ Temp. Effect On Zero: 0.1%F.S./10℃ ◆ Safe Temp. Ranges:-20℃ to +60℃ ◆ Temp. Compensated: -10℃ to +40℃ ◆ Safe Overload: 150%F.S. ◆ Input Impedance:1000Ω±10Ω ◆ Output Impedance:1000Ω±10Ω ◆ Insulation Resistance:>2000MΩ(50V) ◆ Rated Excitation:10V DC/VC ◆ Max. Excitation:15V DC/AC ◆ Cable Color Code: Red (+E) Black (-E) Green (+S) White (-S) Features Aluminum load cell. Mainly used for personal scales.

  CPR35 Specification ◆ Capacities:50kg ◆ Rated Output: 1.5mV/V±5% ◆ Zero Balance: ±1%F.S. ◆ Creep: 0.1%F.S./30min ◆ Non-linearity: 0.1%F.S. ◆ Hysteresis: 0.1%F.S. ◆ Repeatability: 0.1%F.S. ◆ Temp. Effect On Output: 0.1%F.S./10℃ ◆ Temp. Effect On Zero: 0.1%F.S./10℃ ◆ Safe Temp. Ranges:-20℃ to +60℃ ◆ Temp. Compensated: -10℃ to +40℃ ◆ Safe Overload: 150%F.S. ◆ Input Impedance:1000Ω±10Ω ◆ Output Impedance:1000Ω±10Ω ◆ Insulation Resistance:>2000MΩ(50V) ◆ Rated Excitation:10V DC/VC ◆ Max. Excitation:15V DC/AC ◆ Cable Color Code: Red (+E) Black (-E) Green (+S) White (-S) Features Aluminum load cell. Mainly used for personal scales.

  Characteristic： ◆ firmness and durableness, Anti-excess pressure ability, and has the very strong anti-attrition、Anti- impact characteristic. ◆ Anti-impact characteristic, it suitable to eliminate fluoric acid, chloride and water-soluble fluid, strong alkali and major part medium exception water-soluble fluid ◆ Because the sensor uses the dry ceramics，not have any dielectric medium，so have small influence by temperature, and no influence by install direction. ◆ The pure ceramic substrate cannot have the craft pollution, Suits in food and medical. Specifications Temperature condition -10℃～80℃Temperature float ≤0.02%FS/℃Relative humidity ≤95%Base1Cr18Ni9Ti Medium temperature -40℃～125℃Sealrubber or fluorine rubberower voltage24VDCLink screw thread M20*1.5 external fluorine rubber Output signal 4mA～20mA(two-wire systemMediumLiquid, gas or steamLoad resistance 250Ω～750Ω

  Features ◆All stainless steel sealed construction corrosion-resistance;◆Volume exquisite, more suitable for kinds of mechanical device to use◆Entire warm scope compensation and Perfect linearity;◆According to client’s necessary, withOEM process optional. Specifications Capacity -1 to 350KG Overloadpressure2FSOperating temperature -40℃～121℃Pressure cycle ≥108 Accuracy ±0.25％FS Ultimate pressure 3FS Memory temperature -40℃～125℃ Medium compatibleness 316or304(stainless steel) Long-term drifting 0.1％FS/year Full ranges detuning ±1％FS Compensation temperature-10℃～80℃Zero floats±0.25％/10℃ Zero Error±1％FS Electric Specifications millivolt output (sensors) magnify output (transmitters)output 0～100mv Output 4～20mA or 0～5VDCPower supply 5～10VDC Operating power 9～36VDCOutput impedance2K～5KThe return route resistance (Vmax-Vmin)/20KΩ Input impedance ≥2K～5KΩ Connectionthree-wire system (0-5VDC) / two-wire systemConnectionfour-wire system

  Characteristic： ◆ All stainless steel sealed construction corrosion resistance; ◆ High precision and the long-term stability; ◆ Small volume and cheapness; ◆ Many kinds of voltage to output. Specifications Capacity 0～5kg to 0～1000kg Overload pressure 2FS Operating temperature -20℃～90℃ Pressure cycle ≥108 Accuracy 0.1％ 0.25％ 0.5％FS Ultimate pressure 3FS Memory temperature -40℃～90℃ Medium compatibleness 316SSor304(compatible) Long-term stability ±0.1％FS/year Full ranges Error ±1％FS Compensatedtemperature -10℃～70℃ Zero temperature floats ±0. 5％FS/10℃ Zero Error ±0.05ms Insulation resistance ≥2000MΩ@50VDC Excitation voltage 5～15VDC Input impedance 350Ω、1KΩ、1.5 KΩ Full ranges temperature floats ±0.5％FS/10℃ Output impedance 350Ω、1KΩ、1.5 KΩ

  1000 series pressure transmitters adopt advanced silicon resistance technology and stainless steel diaphragm isolated technology, fuses the unique ASIC technology, composes the perfect enlargement output the pressure transmitter. It has the entire warm scope compensation and the corresponding linear compensation, ensuring well long term stability of production. Widely applies to the petroleum, the chemical fiber, the irrigation works, the electric power, the refrigeration plant, the air pressure equipment, industry control and so on. Features All stainless steel sealed construction corrosion-resistance; Volume exquisite, more suitable for kinds of mechanical device to use; Entire warm scope compensation and Perfect linearity; According to client’s necessary, with OEM process optional. Specifications Capacity: Vacuum to 350bar Operating temperature:-40℃～121℃ Accuracy:±0.25％FS Memory temperature: -40℃～125℃ Long-term drifting:0.1％FS/year(non-accumulation value) Compensation temperature:-10℃～80℃ Zero detuning: ±1％FS Zero floats: ±0.25％/10℃ Full ranges detuning: ±1％FS Full ranges floats: ±0.25％/10℃ Overload pressure:2FS Pressure cycle:≥108 Disruptive pressure:3FS Medium compatibleness:316 or 304(stainless steel) Electric Specifications millivolt output (sensors) magnify output (transmitters) Output:0～100mv Output:4～20Ma or 0～5VDC Power supply:5～10VDC Operating power:9～36VDC Input impedance: ≥2K～5KΩ The return route resistance(Vmax-Vmin)/20KΩ Output impedance: 2K～5KΩ Connection: three-wire system/ two-wire system Connection: four-wire system Electric Connection Outline Order method

  CPR24 Specification ◆ Capacities:10kg～30t ◆ Rated Output:2.0mV/V±0.1% ◆ Zero Balance: ±2%F.S. ◆ Creep: ±0.02%F.S./30min ◆ Non-linearity: ±0.02%F.S. ◆ Hysteresis: ±0.02%F.S. ◆ Repeatability: ±0.01%F.S. ◆ Temp. Effect On Output:≤0. 02%F.S./10℃ ◆ Temp. Effect On Zero: ≤0.02% F.S./10℃ ◆ Operation Temp. Ranges:-20℃ to +60℃ ◆ Ultimate Overload: 250%F.S. ◆ Safe Overload: 150%F.S. ◆ Input Impedance:385Ω±30Ω ◆ Output Impedance: 350Ω±3Ω ◆ Insulation Resistance:>5000MΩ(50V) ◆ Rated Excitation:10V～12V DC/VC ◆ Max. Excitation:15V DC/AC ◆ Cable Size:φ5*1500mm ◆ Cable Color Code: Red (+E) Black (-E) Green (+S) White (-S) Features S-Type, alloy steel load cell, mainly used for hopper scale, hanging scales. Outline

  CPR24 Specification ◆ Capacities:10kg～30t ◆ Rated Output:2.0mV/V±0.1% ◆ Zero Balance: ±2%F.S. ◆ Creep: ±0.02%F.S./30min ◆ Non-linearity: ±0.02%F.S. ◆ Hysteresis: ±0.02%F.S. ◆ Repeatability: ±0.01%F.S. ◆ Temp. Effect On Output:≤0. 02%F.S./10℃ ◆ Temp. Effect On Zero: ≤0.02% F.S./10℃ ◆ Operation Temp. Ranges:-20℃ to +60℃ ◆ Ultimate Overload: 250%F.S. ◆ Safe Overload: 150%F.S. ◆ Input Impedance:385Ω±30Ω ◆ Output Impedance: 350Ω±3Ω ◆ Insulation Resistance:>5000MΩ(50V) ◆ Rated Excitation:10V～12V DC/VC ◆ Max. Excitation:15V DC/AC ◆ Cable Size:φ5*1500mm ◆ Cable Color Code: Red (+E) Black (-E) Green (+S) White (-S) Features S-Type, alloy steel load cell, mainly used for hopper scale, hanging scales. Outline

  CPR35 Specification ◆ Capacities:50kg ◆ Rated Output: 1.5mV/V±5% ◆ Zero Balance: ±1%F.S. ◆ Creep: 0.1%F.S./30min ◆ Non-linearity: 0.1%F.S. ◆ Hysteresis: 0.1%F.S. ◆ Repeatability: 0.1%F.S. ◆ Temp. Effect On Output: 0.1%F.S./10℃ ◆ Temp. Effect On Zero: 0.1%F.S./10℃ ◆ Safe Temp. Ranges:-20℃ to +60℃ ◆ Temp. Compensated: -10℃ to +40℃ ◆ Safe Overload: 150%F.S. ◆ Input Impedance:1000Ω±10Ω ◆ Output Impedance:1000Ω±10Ω ◆ Insulation Resistance:>2000MΩ(50V) ◆ Rated Excitation:10V DC/VC ◆ Max. Excitation:15V DC/AC ◆ Cable Color Code: Red (+E) Black (-E) Green (+S) White (-S) Features Aluminum load cell. Mainly used for personal scales.

  CPR24 Specification ◆ Capacities:10kg～30t ◆ Rated Output:2.0mV/V±0.1% ◆ Zero Balance: ±2%F.S. ◆ Creep: ±0.02%F.S./30min ◆ Non-linearity: ±0.02%F.S. ◆ Hysteresis: ±0.02%F.S. ◆ Repeatability: ±0.01%F.S. ◆ Temp. Effect On Output:≤0. 02%F.S./10℃ ◆ Temp. Effect On Zero: ≤0.02% F.S./10℃ ◆ Operation Temp. Ranges:-20℃ to +60℃ ◆ Ultimate Overload: 250%F.S. ◆ Safe Overload: 150%F.S. ◆ Input Impedance:385Ω±30Ω ◆ Output Impedance: 350Ω±3Ω ◆ Insulation Resistance:>5000MΩ(50V) ◆ Rated Excitation:10V～12V DC/VC ◆ Max. Excitation:15V DC/AC ◆ Cable Size:φ5*1500mm ◆ Cable Color Code: Red (+E) Black (-E) Green (+S) White (-S) Features S-Type, alloy steel load cell, mainly used for hopper scale, hanging scales. Outline

  CPR24 Specification ◆ Capacities:10kg～30t ◆ Rated Output:2.0mV/V±0.1% ◆ Zero Balance: ±2%F.S. ◆ Creep: ±0.02%F.S./30min ◆ Non-linearity: ±0.02%F.S. ◆ Hysteresis: ±0.02%F.S. ◆ Repeatability: ±0.01%F.S. ◆ Temp. Effect On Output:≤0. 02%F.S./10℃ ◆ Temp. Effect On Zero: ≤0.02% F.S./10℃ ◆ Operation Temp. Ranges:-20℃ to +60℃ ◆ Ultimate Overload: 250%F.S. ◆ Safe Overload: 150%F.S. ◆ Input Impedance:385Ω±30Ω ◆ Output Impedance: 350Ω±3Ω ◆ Insulation Resistance:>5000MΩ(50V) ◆ Rated Excitation:10V～12V DC/VC ◆ Max. Excitation:15V DC/AC ◆ Cable Size:φ5*1500mm ◆ Cable Color Code: Red (+E) Black (-E) Green (+S) White (-S) Features S-Type, alloy steel load cell, mainly used for hopper scale, hanging scales. Outline

  1000 series pressure transmitters adopt advanced silicon resistance technology and stainless steel diaphragm isolated technology, fuses the unique ASIC technology, composes the perfect enlargement output the pressure transmitter. It has the entire warm scope compensation and the corresponding linear compensation, ensuring well long term stability of production. Widely applies to the petroleum, the chemical fiber, the irrigation works, the electric power, the refrigeration plant, the air pressure equipment, industry control and so on. Features All stainless steel sealed construction corrosion-resistance; Volume exquisite, more suitable for kinds of mechanical device to use; Entire warm scope compensation and Perfect linearity; According to client’s necessary, with OEM process optional. Specifications Capacity: Vacuum to 350bar Operating temperature:-40℃～121℃ Accuracy:±0.25％FS Memory temperature: -40℃～125℃ Long-term drifting:0.1％FS/year(non-accumulation value) Compensation temperature:-10℃～80℃ Zero detuning: ±1％FS Zero floats: ±0.25％/10℃ Full ranges detuning: ±1％FS Full ranges floats: ±0.25％/10℃ Overload pressure:2FS Pressure cycle:≥108 Disruptive pressure:3FS Medium compatibleness:316 or 304(stainless steel) Electric Specifications millivolt output (sensors) magnify output (transmitters) Output:0～100mv Output:4～20Ma or 0～5VDC Power supply:5～10VDC Operating power:9～36VDC Input impedance: ≥2K～5KΩ The return route resistance(Vmax-Vmin)/20KΩ Output impedance: 2K～5KΩ Connection: three-wire system/ two-wire system Connection: four-wire system Electric Connection Outline Order method

  CPR35 Specification ◆ Capacities:50kg ◆ Rated Output: 1.5mV/V±5% ◆ Zero Balance: ±1%F.S. ◆ Creep: 0.1%F.S./30min ◆ Non-linearity: 0.1%F.S. ◆ Hysteresis: 0.1%F.S. ◆ Repeatability: 0.1%F.S. ◆ Temp. Effect On Output: 0.1%F.S./10℃ ◆ Temp. Effect On Zero: 0.1%F.S./10℃ ◆ Safe Temp. Ranges:-20℃ to +60℃ ◆ Temp. Compensated: -10℃ to +40℃ ◆ Safe Overload: 150%F.S. ◆ Input Impedance:1000Ω±10Ω ◆ Output Impedance:1000Ω±10Ω ◆ Insulation Resistance:>2000MΩ(50V) ◆ Rated Excitation:10V DC/VC ◆ Max. Excitation:15V DC/AC ◆ Cable Color Code: Red (+E) Black (-E) Green (+S) White (-S) Features Aluminum load cell. Mainly used for personal scales.

  CPR24 Specification ◆ Capacities:10kg～30t ◆ Rated Output:2.0mV/V±0.1% ◆ Zero Balance: ±2%F.S. ◆ Creep: ±0.02%F.S./30min ◆ Non-linearity: ±0.02%F.S. ◆ Hysteresis: ±0.02%F.S. ◆ Repeatability: ±0.01%F.S. ◆ Temp. Effect On Output:≤0. 02%F.S./10℃ ◆ Temp. Effect On Zero: ≤0.02% F.S./10℃ ◆ Operation Temp. Ranges:-20℃ to +60℃ ◆ Ultimate Overload: 250%F.S. ◆ Safe Overload: 150%F.S. ◆ Input Impedance:385Ω±30Ω ◆ Output Impedance: 350Ω±3Ω ◆ Insulation Resistance:>5000MΩ(50V) ◆ Rated Excitation:10V～12V DC/VC ◆ Max. Excitation:15V DC/AC ◆ Cable Size:φ5*1500mm ◆ Cable Color Code: Red (+E) Black (-E) Green (+S) White (-S) Features S-Type, alloy steel load cell, mainly used for hopper scale, hanging scales. Outline

  CPR24 Specification ◆ Capacities:10kg～30t ◆ Rated Output:2.0mV/V±0.1% ◆ Zero Balance: ±2%F.S. ◆ Creep: ±0.02%F.S./30min ◆ Non-linearity: ±0.02%F.S. ◆ Hysteresis: ±0.02%F.S. ◆ Repeatability: ±0.01%F.S. ◆ Temp. Effect On Output:≤0. 02%F.S./10℃ ◆ Temp. Effect On Zero: ≤0.02% F.S./10℃ ◆ Operation Temp. Ranges:-20℃ to +60℃ ◆ Ultimate Overload: 250%F.S. ◆ Safe Overload: 150%F.S. ◆ Input Impedance:385Ω±30Ω ◆ Output Impedance: 350Ω±3Ω ◆ Insulation Resistance:>5000MΩ(50V) ◆ Rated Excitation:10V～12V DC/VC ◆ Max. Excitation:15V DC/AC ◆ Cable Size:φ5*1500mm ◆ Cable Color Code: Red (+E) Black (-E) Green (+S) White (-S) Features S-Type, alloy steel load cell, mainly used for hopper scale, hanging scales. Outline

  1000 series pressure transmitters adopt advanced silicon resistance technology and stainless steel diaphragm isolated technology, fuses the unique ASIC technology, composes the perfect enlargement output the pressure transmitter. It has the entire warm scope compensation and the corresponding linear compensation, ensuring well long term stability of production. Widely applies to the petroleum, the chemical fiber, the irrigation works, the electric power, the refrigeration plant, the air pressure equipment, industry control and so on. Features All stainless steel sealed construction corrosion-resistance; Volume exquisite, more suitable for kinds of mechanical device to use; Entire warm scope compensation and Perfect linearity; According to client’s necessary, with OEM process optional. Specifications Capacity: Vacuum to 350bar Operating temperature:-40℃～121℃ Accuracy:±0.25％FS Memory temperature: -40℃～125℃ Long-term drifting:0.1％FS/year(non-accumulation value) Compensation temperature:-10℃～80℃ Zero detuning: ±1％FS Zero floats: ±0.25％/10℃ Full ranges detuning: ±1％FS Full ranges floats: ±0.25％/10℃ Overload pressure:2FS Pressure cycle:≥108 Disruptive pressure:3FS Medium compatibleness:316 or 304(stainless steel) Electric Specifications millivolt output (sensors) magnify output (transmitters) Output:0～100mv Output:4～20Ma or 0～5VDC Power supply:5～10VDC Operating power:9～36VDC Input impedance: ≥2K～5KΩ The return route resistance(Vmax-Vmin)/20KΩ Output impedance: 2K～5KΩ Connection: three-wire system/ two-wire system Connection: four-wire system Electric Connection Outline Order method