Offer List

  Model: TL-125 Tractor power:20-28hp Tractor type of linkage: three-point hitch linkage Tractor speed of PTO: 540r/min Tillage width: 125cm Tillage depth: 15cm Speed of cultivator shaft: 200r/min Number of blade: 28 piece  

  Model: 1LY(SX) Tillage width: 750mm Tillage depth: 250-300mm Weight: 600kg Min.h.p.rating: 35hp Working effective: 0.375ha/h  

  Model: BB0554 Working width:54" Weight: 298pounds Nimber of shanks: 4 Capacity: 8cu.ft Shank size: 3/4"x2 1/2"x15" Height of moldboard:12 3/4" Side panel thickness: 3/16" Overall depth: 26" Overall height: 35 11/16" Max.h.p.rating: 25 engine hp 3-point hitch type: Cat.0,Cat.1 Limited &  Cat .1 A-frame material: 3/8" x 2 1/2" flat bar Lower hitch: Clevis type  

  Log spliter, Wood working machine, Agricultural machine   Name: Log spliter Model:LSD16 Pressure(Ton):16 Power(hp)  :5.5 Dimension(mm) :    1800x1460x1700 Net weight (kg):250 Max. wood diameter(mm):300 Max. wood length(mm):600 Cycles(circulatory period):20-25 Diameter of tank(mm)   :80 Stroke length(mm):550

  Model: XY52Z Engine: 22hp briggs & stratton gasoline dengine Starting way: 12V electric starting Driving type: double hydraulic pump driving Transmission type: soft belts Traveling speed: 0-11km/h Operating ways: double operation handles zero turn radius Blades: 3pcs(18") Deck: 4 gauge re-enforcement steel Cutting height: adjustable by 6 shifts from 1"-4.5" Gas tank capacity: Two tanks, total 34L provides 5.5 hours operating time Cutting area: 11500Sqm/h Wheels-front: 11x4-5 Wheels-rear: 20x10-8 Net weight: 370kg Outer measurement: 1790x1660x970mm Packing measurement: 2050x1400x950mm   Accessories, Mulching kit      Grass Catcher   Rolling of Protection System (Rops)   Sunshade Wider front-wheel 12x6-6     sulky  

  Model: SL170 Dimensions: 2890x1700x970mm Structure weight：225kg Cutting width：1660mm Working efficiency: 4500-13000 Sqm/h PTO turnning speed: 540r/min PTO spline: 6x8x1000mm Power requirement: 30-50hp Note: Quality PTO shaft is standard accessories,          The topper mower without rear wheel are available  

  Model: FM180 Dimensions: 1892x1450x600mm Structure weight: 230kg Cutting width: 1790mm Working efficiency: 5000-15000 CBM/h PTO turnning speed: 540r/min PTO spline: 6x8x1000mm Power requirement: 20-35hp  

  Name: Galvanization trailer Carriage dimensions: 3000x2000x500mm Cage height: 1500mm Load; 2000kg Type of brake; electric brake Dead weight: 1200kg Tyre type; 180/70SD14

  Name: Galvanization trailer Carriage dimensions: 3000x2000x500mm Cage height: 1500mm Load; 2000kg Type of brake; electric brake Dead weight: 1200kg Tyre type; 180/70SD14

  Model: EF205 Dimensions：2150x687x722mm Structure weight: 330kg Cutting width: 2029mm Working efficiency: 5800-15400 Sqm/h PTO turnning speed: 540r/min PYO spline: 6x8x800mm Power requirement: 45-80hp Note: Quality PTO shaft is standard accessories            Any idea on design is acceptable if the order is in quantity.

  Model: TH-180 Dimensions: 2000x800x700mm Structure weight: 350kg Tilling width: 1795mm Tilling depth: 120mm Working efficiency: 2200-3200Sqm/h PTO turnning speed: 540r/min PTO Spline: 6x8x700mm Power requirement: 40-75hp

  Model: WS-30A Engine: 30hp Chipper capacity: 8" diameter takes up to 16" slab Feeding system: Full hydraulic Rotor plate size: 60cm Rotor plate weight: 85kg Knives number: 1 stationary knife; 2rotor knives Dimensions(hooper discharge):140x150x110cm Feed hopper inner opening: 20x22cm Discharge hood height: 200cm Rated RPM: 1200 Weight: 500kg Working efficiency: 6-8CBM/h

  Model: WC-8 Dimensions: 1680x1400x1620mm Structure weight: 370kg Radius of blade disc:302mm Chipping diameter: 200mm Working efficiency: 8-9 CBM/H PTO turnning speed: 540r/min PTO spline: 6x8x520mm Power requirement: 30-45hp

  Material: ZG230-450 Casting: sand casting Specification: DN50,DN65,DN80,DN100,DN125,DN150,DN200,DN250,DN300 Surface roughness:Ra25-Ra63 Elbow: 90degree,45degree,22.5degree,11.5degree Machining precess is available OEM parts available according to customer's specification(drawing or samples) Complex geometry is available.

  Model: PD55 Power requirement: 40-80hp Augers: 12"-36" Description: built for tough industrial jobs

  Model: FTLD800 Max.lift height-measured at pivot pin: 3150mm Max,lift height-under level bucket: 2300mm Max.dump reach:1200mm Dump angle: 42 degree Reach with bucket on ground: 2300mm Roallback angle on ground: 45 degree Max.digging depth: 110mm Rated load: 800kg Bucket capacity: 0.6 CBM Pallet fork length: 1240MM Pallet fork width: 1200mm Pallet fork load: 800kg Wood grapple width: 1200mm Wood diameter/weight: 1200mm/800kg Tractor power: 70-80hp