Motor

   Features: Conform to IEC standard, with the advantage of light weight, low noise,nice appearance, excellent electric performance Working Conditions: The altitude not exceeding 1000m above sea level. The ambient temperature subject to seasonal variations but not exceeding 40°C and not less than -15°C Motor Frame: IEC 711-100 Output(KW): 0.37kW~3kW Rated Voltage(V): 220V Frequency(HZ): 50HZ or 60HZ Raged Speed(rpm): 1400r/min 4-pole. 2800r/min 2-pole. Insulation Class: CLASS B Protection Class: IP44, IP54, IP55 Mounting Type: IMB3, IMB5, IMB14, IMB35 Duty: S1 Methods of Cooling: IC0141

   JY Series Single-phase capacitor start motor. These motors are suitable for the situation that require the higher starting torque and the limited starting current. The motors can be used on driving all kinds of small machine that need full load starting. The motors of this series are totally enclosed and fan cooled, possess No.09, No.1 and No.2 three frame size and with the starting capacitor on the top of the motor. Operating Conditions: Ambient temperature: -15 oC to 40 oC Altitude: not exceed 1000m Rated voltage: 110V, 115V, 120V, 220V, 230V, 240V Rated frequency: 50Hz, 60Hz Protection class: IP44, IP54, IP55 Insulation class: B, F Cooling method: ICO141 Duty: St(continuous)

   YC series heavy-duty single-phase motors are suitable for small size machine tools and water pumps.especially for family workshops where only single-phase power supply is available.capacitor starting. YCL series heavy-duty capacitor start and run. comparing with the same output YC series motor,YCL series temperature raising reduce 8.74k on average,efficiency improve 4.21 percent,power factor raise 0.16 Protection class:IP44 IP54 IP55 Insulation class:B,F Rated frequency:50HZ 60HZ Rated output:0.18kw-7.5kw Shell material:cast iron

  Y2 series three-phase induction motor is specially designed for European market, whose terminal box is located on the top. This motor has a very compact structure and attractive appearance. The sizes and mounting dimensions are produced according to the IEC standard. The motor has some good features, such as high efficiency, energy-saving, high starting torque and easy maintenance. We can also supply aluminum housing type for frame size below IEC132. Y2 series motors can be widely used as driving equipments of various machineries, such as, machine tools, blowers, pumps, compressors, transporters, agricultural and food processing. Specifications & FeaturesRated voltage: 380V or on request, Rated frequency: 50Hz or 60HzConnection: Star-connection for 3KW or less while delta-connection for 4KW or more. Duty/Rating: Continuous (S1). Insulation class: F, the temperature rise of the stator winding is examined at 80K (by resistance method). Protection class: The main body of the motor is IP54, terminal box reaches IP55Cooling method: ICO141 (cooled by SELF-FAN) Improving electromagnetic and construction design, low noise and little vibration.Operating Conditions Ambient temperature: -15≤θ≤40Altitude: not exceeding 1000meters above sea level. Relative humidity less than 90% .Available typeFrame H63 to 315, 2/4/6/8 poles, Rated output: 0.12KW-200KWB3/B5/B14/B35/B34 mounting; Mounting dimensions according to IEC60034 standard

   Y series motors are totally enclosed fan cooled, three-phase squirrel cage inductionmotors, it is newly designed in conformity with the relevant requirements of IECstandards. Y series motors have outstanding performance, such as high efficiency, energy-saving,high starting starting torque, low noise, little vibration, reliable operation andeasy maintenance, etc.Y series motors are widely used in places, where there doesn't exist combustible,explosive or corrosive gas, tools, pumps, fans, transport machinery, mixer, agriculturemachinery and food machines, etc. OPERATING CONDITIONS: Ambient temperature: -15oCAltitude: not exceed 1000mRated voltage: 220/380V,? 380/660V Rated frequency: 50Hz Protection class: IP44, IP54 Insulation class: B. F Cooling method: ICO141 Duty: S1(continuous) Connection: Star-connection For up to 3kW, delta-connection for 4kW and above.

   Operating conditions:* Max. working pressure: 4.5 bars* Liquid temperature up to 60°C* Ambient temperature up to 40°C* Total suction lift up to 9M* Continuous duty Motor:* Two-pole induction motor (2,850rpm)* Insulation class: B* Protection: IP44 Materials:* Pump body: cast iron* Motor support: cast iron* Motor housing: aluminum* Impeller: brass* Diffuser: Noryl* Shaft with rotor: superior steel* Mechanical seal: carbon / ceramic * Single phase 220 - 240V, 50Hz* Single phase 110 - 127V, 60Hz as per requests* Single / three-phase 220V, 60Hz as per requests

   Operating conditions:* Max. working pressure: 4.5 bars* Liquid temperature up to 60°C* Ambient temperature up to 40°C* Total suction lift up to 9M* Continuous duty Motor:* Two-pole induction motor (2,850rpm)* Insulation class: B* Protection: IP44 Materials:* Pump body: cast iron* Motor support: cast iron* Motor housing: aluminum* Impeller: brass* Diffuser: Noryl* Shaft with rotor: superior steel* Mechanical seal: carbon / ceramic * Single phase 220 - 240V, 50Hz* Single phase 110 - 127V, 60Hz as per requests* Single / three-phase 220V, 60Hz as per requests

   These three series self-priming JET pumps equipped with same Venturi system each. They are suitable to convey clean water and non-aggressive chemical fluids, even with liquid mixed with gas, from well in continuous duty; they are also indicated to increase water pressure in centralized water systems, for small irrigation systems, for watering gardens, for washing systems with water jets, for fountains, etc. It is normally advisable to install a foot valve on the suction branch. WORKING CONDITIONSMax Temperature of Fluid up to +40°CMax Pressure 8bar, Max Ambient Temperature up to 40°C

  Operating conditions*Liquid temperature up to 60*Ambient temperature up to 40*Total suction lift up to 9m.*Continuous duty?Motor*Two-pole induction motor(n=2850r.p.m)*Insulation Class B*Protection IP44?Material*Pump body: Cast iron*Motor support: Cast iron*Motor housing: Aluminum*Impeller: Brass*Diffuser:Noryl*Single with rotor:45#Steel,AISI 416 stainless steel if request*Mechanical seal:Carbon/Ceramic?Single phase 220V-240V/50HSingle phase 110V-127V/60Hz If request

   NFM pumps are specifically designed to achieve high delivery rates with low to medium heads for industrial and agricultural use. Two flanges with screw make it installation and maintenance simple and easy. Its volute and impeller make it able to pump water that is even fairly dirty. High delivery rates under continuous or heavy duty, making them advantageous for rain and gravity irrigation, for pumping water from lakes, river, wells and for a wide variety of industrial uses where high delivery rates must be achieved at low to average heads. Operating Limits Max temperature of fluid up to +80oC Max pressure 10bar Max ambient temperature up to 40oC

   DTM series are single stage centrifugal pumps, suitable for agriculture and industrial applications to convey clean liquids and non-aggressive chemical fluids. It's hydraulic characteristic is lower head but bigger capacity. Working conditions:1) Max. temperature of fluid up to: 80°C2) Max. ambient temperature up to: 40°C3) Max. pressure: 10 Bar Structural characteristics:1) Pump casing: cast iron2) Impeller: brass, cast iron, aluminum3) Motor housing: closed, externally ventilated4) Mechanical seal: stainless steel (carbon to ceramic)5) Shaft: 45# steel or stainless steel6) Bearing: SKF/NTN/NSK/China7) Insulation class: B and F8) Protection class: IP44 and IP549) Thermal protector available if required