Offer List

      The sixth generation of HT-60 foam concrete dedicated machine (cement foam machine) model is divided into, HT-60A type, HT-60B type, HT-60C type, with the production of high efficiency, easy to operate, such as the merits of the aircraft by the automatic mixing , automatic foam, high-voltage transmission is composed of three parts, mainly the production of lightweight foam concrete, with an annual output of up to 1,600,000 square meters. Performance characteristics If you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

   It is a kind of environmental protection, clean, the renewable new fuel.It can press all kinds of agricultural wastes into briquette.The product is biomass fuel it can be run with electrical power and diesel power . The raw materials like stalk, the sawdust, the sawdust, the peanut shell, the corncob, the straw, each kind of crops straw .And the moisture should be 5%-30%.Technical parameter: Model JMB-1000 JMB-1500 JMB-2000Power 15kw 18.5kw 22kwCapacity 700-900㎏/h 1000-1500㎏/h 1800-2000㎏/hMoisture 10-25% 10-30% 10-30%Applied length  3-50㎜         3-60㎜ 3-60㎜Products density 0.8-1.4g/㎝3 0.8-1.4g/㎝3 0.8-1.4g/㎝3Dimension  1700x800x1400 1800x900x1660 1800x900x1680weight 0.8t 1.3t 1.5tIf you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

   It is a kind of environmental protection, clean, the renewable new fuel.It can press all kinds of agricultural wastes into briquette.The product is biomass fuel it can be run with electrical power and diesel power . The raw materials like stalk, the sawdust, the sawdust, the peanut shell, the corncob, the straw, each kind of crops straw .And the moisture should be 5%-30%.Technical parameter: Model JMB-1000 JMB-1500 JMB-2000Power 15kw 18.5kw 22kwCapacity 700-900㎏/h 1000-1500㎏/h 1800-2000㎏/hMoisture 10-25% 10-30% 10-30%Applied length  3-50㎜         3-60㎜ 3-60㎜Products density 0.8-1.4g/㎝3 0.8-1.4g/㎝3 0.8-1.4g/㎝3Dimension  1700x800x1400 1800x900x1660 1800x900x1680weight 0.8t 1.3t 1.5tIf you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

  The structure of this series Jaw Crusher are simple ,reliable ,firm,and easy to be remanded .They are extensively used in metallurgy,chemical industry,power industry ,beneficiation,construction,etc.They can stave all kinds of ore and rocky into tiny granule or poder.  Working principle:the motor drive the rotors to revolve through strap which led the Jaw reproach and go away from the firmed Jaw periodicly .The material was crushed, pressed,twisted,grinded until to be discharged.model    Feed mouth   Max width Adjust scape Capacity  Rotor speed power weightPE150X250 150X250 125 10-40 0.6-3 300 5.5 0.81250X400PE 250X400 125 20-60 3-13 300 15 2.8PE400X600 400X600 340 40-100 10-50 275 30 6.5PE500X750 500X750 450 40-125 20-120 275 55 11PE600X900 600X900 500 65-160 30-130 250 55-75 16.5PE750X1060 750X1060 600 200-290 70-200 250 110 31PE750X1060 750X1060 750 95-165 80-250 200 110 50PE150X750 900X1200 120 18-48 5-16 320 15 3.5PE250X750 150X750 210 25-60 8-22 330 22 4.9PE250X1000 250X1000 210 25-60 10-40 330 30-37 6.5PE250X1200 250X1200 210 25-60 13-50 330 37 7.1If you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

  This garlic peeling machine is high effencicy machine to peel the garlic ,the peel garlic do not need the swim in the water and the break rate of the garlic will be little and do not generate the stimulate smell ,and save the time and the power .The machine is special designed to peel the garlic ,during the peeling the peel do not through the knifes and grinding which can keep the integrity of the garlic ,freshness The machine include the automatic temperature controller and reach the sanitation standard so that the garlic can store many days.The machine can dry and peel together ,outside size is little and high capacity ,easy to remand and clear .Technical parameter:dimension：L57cm x W75cm x H160cm power supply：220V/380V，50/60Hz  0.30~2KW weight ：130KG material ：inside is stainless steel capacity ：200-300kg/hourmotor power :380V ,7.5KwIf you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

  The machine need the motor power supply , well designed,use the speed change device which can make the roller  form the speed discrepancy ,the roller utilize the speed discrepancy and the special designed structure which form the force of knead ,the knead force just as simulate the hand power .The machine can break different kind of garlic by adjust the space between the roller ,there are fans in the machine which can remove the peel and husk.Feature :The machine used the high quality pastern to make the roller  which has the performance of high flexibility,antifriction, stretch-proof,ectSteady performance ,high effiency ,and low lost rate,well designed which need little room,save time ,save energy ,easy to remend and low rate of fault.Technical parameter:Power supply :380v,50hz,1.1kw or 220V,50Hz;1.1KwMotor power:1.1 kwFans power:0.55 kwCapacity :200-400kg/h Weight:160kgOutside size:82*65*120cmIf you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

  The temperature of the ice can under -20℃ ,the machine make of stainless steel ,and the height of the ice can adjusted according your need.Model Ice making capacity cryogen Voltage Power  Weight   dimensionzx-25 25kg/24H R22 220V 0.26KW 39kg 50Hz  400*495*830mmzx-40 40kg/24H R22  220V 0.38KW 47kg 50Hz 490*530*910mmzx-60 60kg/24H R22 220V 0.42KW 65kg 50Hz 670*540*920mmzx-80 80kg/24H R22 220V 0.55KW 70kg 50Hz 670*540*1000mmIf you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

  The peanut peeling group include three part : impurity removing machine , conveyor  and peeling machine . the impurity removing machine is used to remove the impurity and dust in the peanut the through the conveyor into the peeling machine. Model JXTK-2500 JXTK-3000 Capacity 2500 kg/h 3000 kg/h Shelling rate ≥98% ≥98% Breaking rate ≤5% ≤5% Cleaning rate ≥97% ≥99% Losing rate ≤5% ≤5% Motor 5.5 kw , Grade 6 7.5 kw , Grade 6 5.5 kw , Grade 4 7.5 kw , Grade 4 Dimension 2500*1200*2800mm 2540*1360*3000mm If you have further inquiry ,pls fell free to contact me on : E-mail：hnshw28@shwpcd.com hp:0086 15238020686 http://www.shwpcd.cn MSN:hnshw28@hotmail.com Yhaoo messager:hnshw28@yahoo.cn Tel:86-0371-65863108 Fax:86-0371-65863109 Looking forward to our cooperation with you. With warm regards, Lynn yang

  Applications: chickens,ducks, geese , meat, pigeon, quail and other poultry.Capacity: 35 pcs poultry per minute , 1kw capacity is 250-300 ducksModel  JX54—750W JX60-750W JX60-1000WCapacity  8kg/(0.5-1)h 12kg/(0.5-1)/h 14kg/(0.5-1)hWorking rate  96% 96% 96%Net weight  52kg 62kg 62kgRotated speed  180r/min 180r/min 180r/minMotor power  750w 750w 1000wDiameter of chamber  540mm 600mm 600mmdimension 600*940 700*940 700*980If you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

  JX  Series vacuum extruder are advanced twin-stage vacuum Brick Presses which draw lessons from the developed domestic, abroad experiences and design to making .The main frame is using of high quality steel, and reasonable structure, sturdy and durability, and strong applicability, high efficiency, easy maintenance but lower energy consumption . They are applicable for the production of high-rate hollow bricks with the materials of clay, coal gangue, shale, high-volume fly-ash, urban construction waste, gangue waste, inferior soil.Specification model number Production ability Standard block/hr Motive power（KW） Principal axis turning speed Feature size (mm)JX60/60-4.0 12000-20000 75+200 28--40 7260×3800×3250JX50/50-3.0 12000-16000 75+160 35--40 6300×1784×2000JX45/45-2.5 10000-13000 55+90 40—45 35--40 6145×1784×2000JKB40/40-2.0 8000-10000 45+75 40—45 35--40 6430×1450×1950JX35/35-1.5 7000-9000 37+55 37  46 5230×1400×1850If you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

  If you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang 1 . The electrical control system of whole machine is equipped with PLC system, operated in graphical interface, which with the functions of random signal analysis, failure diagnosis and the parameters setting, guarantee the best running of machine.2. 6-15 Type Block Making Machine equipped with telecommunication control system to make great convenience in monitoring in other place, fault diagnosis and system upgrade.3. Material storing & distributing unit: adopt closed type belt conveyer prevent the concrete from fluidity in advance owing to the influence ofaftershocks,guarantee products molding smoothly and the high quality.JX6-15Forming number      390×190×53 36pieces/mould 69120pieces/shiftForming cycle        15-20secondOutputs (piece)      69120Power (Kw)             34.5Overall weight (T)     9.8TOutside dimension (mm)   6790×2205×2780mmSplint dimension (mm)   850×780×40mm

  Screw type presses are advanced oil processing machinery, characterized by their simple design, easy to use, wide suitability and continuous operation; and high productivity and high oil output rate. Moreover, they can be used for various raw materials, as ground nuts, bean, rape and cotton seeds, sesame, olive, sunflower, coconuts and cocoa and grass seeds. However, they are suitable for medium-small sized oil extruding workshops or professional farmers. Certainly, they can be used for repressing in submerging oil workshops, too.Our oil press can extracting vegetable oil from different raw oil material. Such as ground nuts,bean,rape and cotton seeds,sesame,olive,sunflower, coconuts,and cocoa and grass seeds and so on.  We have small scale oil press with capacity from 0.5t/d to 12t/d.  We also  have large scale oil press with capacity from 12t/d to 50t/h.We also can  process the complete turn-key oil plant from capacity 100-500t/d.  They are suitable for medium-small sized oil extruding workshops or  professional farmers. Certainly, they can be used for repressing in  submerging oil workshops, too.6YL_100A Combined screw oil press (motor, filter, heating pipe, control cabinet)     Capacity  :  5t/24hr  150-250kg/h Weight  :  1100kg  Power  :  7.5-11kw  Size  :  1980*1450*1800 6YL-100  screw oil press  Power: 7.5kw Capacity: 4-5ton/24hSize : 1650*550*1180 If you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

  JS series concrete mixer is double horizontal shaft forced mixer. Combining advantages of single unit stand-alone operation and simple concrete batching plant with PLD series batching machine, the unit can work in concrete mixing station for prefabricated-component factories of various sizes and construction of highway, bridge, water conservation and dock etc. It can mix no-slump concrete, plastic concrete, liquefied concrete, lightweight aggregate concrete and various mortars, as a widely used high efficiency model. If you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

  Production capacity(pics/minute) 50pics/minuteSpecifiction(MM) Dia 140*80-12holesMotor power(kw) 7.5KWSize(mm) 1629*1210*1930Weight(kg) 4000kgIf you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

   Rating capacity（L） 350LRoted speed of the main axes ( 35Roats/minuteMotor power 7.5kwOutside size（mm） ф1200×1100mmweight 1700kgSize of the grinding wheel（mm） Ф400×200Mix shove 2picsPrice 2895usdThe packaging price 263usd/pic(wooden box)The frienght(by sea to Qingdao)  263usd/piccharcoal machines including crusher,mixer,grinder,dryer,briquetting machine,furnace,construction machine,brick machine,etc.If you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang

  It is widely applied to produce powdered coal and fine coke balls,powered coal bar of fertilizer industry,applicable to mineral ball of chemical industry,applicable to mineral fines of different kinds of ferrous and non-ferrous metal,applicable to iron scale and dust elimination of metallurgy and applied to produce balls of sludge and refractories.JXVII290Capacity: 4000KG/Hour(For coal powder)2000KG/Hour(for charcoal powder)Power: 7.5-11KW Width of roller: 250mmDiameter of roller: 360mm pressure of machine: 20-30tEndurable pressure of briquettes: 60kgRotation of main shaft: 18 rev/minMaterial of roller: 65MnWeight of machine: 1850KG Size: 1300*1150*2050MMIf you have further inquiry ,pls fell free to contact me on :E-mail：hnshw28@shwpcd.comhp:0086 15238020686http://www.shwpcd.cnMSN:hnshw28@hotmail.comYhaoo messager:hnshw28@yahoo.cnTel:86-0371-65863108Fax:86-0371-65863109Looking forward to our cooperation with you.With warm regards,Lynn yang