Offer List

  EPP molding machine Mainly used to produce EPP packaging, automobile parts by Expanded polypropylene. ?Features:?1. Machine frame wholly welded by shape steel, and processed by high temperature annealing. Frame surface treated by hot dip galvanizing. Guarantee the best capability and long lifetime for anti-corrosion. ?2. 10.4 inch, 60,000 color TFT touch screen and PLC with modular structure. Adopt specialized software to manage EPP molding process.? 3. Triple compressed air filter with automatic drain function: preliminary filter, fine filter, and micro filter. 4. Digital voltage, ampere & temperature display system, fault monitoring alarm, wrong data input alarm system, and Three-color indicator light for display of operating status. 5. Molds was driven and locked by multiple hydraulic cylinders. The mold locking force is powerful and can be allocated averagely. 6. None guide bar linear moving system with balance rack and pinion rail. It’s the newest Germany patented design. 7. Effective vacuum condenser and Germany double vacuum hydraulic ring pumps. 8. Air distribution system with automatic air source shielding for rapid filling injection. 9.Hinge type Media conveying pipes, more cost-saving on material than rubber pipe. 10. Cooling water pressurized tank can work under low water pressure. 11. Protector of electromotor, protector of switch position on hopper strobe, and protector of hydraulic pressure. 12. Stable steam pressurized filtering system with responsive balance controller. It greatly lengthens the lifetime of mold. 13. Use Germany patented technology of central energy distribution system and Germany digitalize-controlled steam valve & air valve. The steam flow, demoulding air, ejector pin air, and air cooling flow could be adjusted on the control panel. 14. Large volume pressurized hopper and rapid connection system for injector. 15. Steam chamber built in moving and fixed molds. It saves mold costs much. 16. Wholly digitalized temperature & pressure control system, it makes sure molding precisely. 17. Use the most advanced Germany EPP molding technology.

  EPS automatic vacuum molding machine for production of foam (expandable polystyrene) packaging, construction panel and ICF. It consumes half energy volume of common Chinese machines to process styrofoam. 1. Machine frame: Wholly welded by shape steel, high temperature annealing, and heat treatment. Surface derusted by sandblast and coated by spraying zinc.? Adopt American epoxy polyamide paint as anticorrosive primers, and use acrylic paint as anticorrosive top coat. 2. 10.4 inch, 65536 color TFT touch screen and modular structured PLC: Installed by temperature, pressure and time controlling software which is specialized in EPS molding technique. 3. Triple Air Filter: Automatic drain function with preliminary filter, fine filter, and micro filter, used to maintain operation of solenoid valve group. 4. Display system:Digital voltage, ampere & temperature display system, fault monitoring alarm, wrong data input alarm system, and Three-color indicator light for display of operating status. 5. Driving system:Driven and locked by double hydraulic cylinder, power of mold locking is 30 tons. 6. Large volume vacuum condensation system with spray function:?Greatly improves cooling speed and the vacuum effect, shorten the water cooling time. The temperature for demoulding is around 80 ℃. 7. Air distribution system with automatic air source shielding for rapid material filling. It improves the speed of filling gun changing and installing. 8. Pressurized cooling water system: Secure cooling under low water pressure. 9. Protection system:Protector of electromotor, protector of switch position on hopper strobe, protector of hydraulic pressure. They are used to keep normal operation and reduce rate of faulty products. 10. Stable steam decompressing and filtering function:It keeps the uniformity of heating and molding. 11. Adopt the central energy distribution valve and large flow steam valve and air valve with balance responsive controller to realize the instance filling. The steam flow, demoulding air, mandril pole air, and air cooling flow could be adjusted on the control board, greatly shorten production time and energy consumption. 12. Large volume hopper with filling position switch. Outlet port device is good to prevent reversing of materials. The hopper equipped with responsive balance controller to fill by pulse-type pressurization.

  EPS?ICF molding machine for production of foam (expandable polystyrene) packaging, construction panel and ICF. ? 1. Machine frame: Wholly welded by shape steel, high temperature annealing, and heat treatment. Surface derusted by sandblast and coated by spraying zinc.? Adopt American epoxy polyamide paint as anticorrosive primers, and use acrylic paint as anticorrosive top coat. 2. 10.4 inch, 65536 color TFT touch screen and modular structured PLC: Installed by temperature, pressure and time controlling software which is specialized in EPS molding technique. 3. Triple Air Filter: Automatic drain function with preliminary filter, fine filter, and micro filter, used to maintain operation of solenoid valve group. 4. Display system:Digital voltage, ampere & temperature display system, fault monitoring alarm, wrong data input alarm system, and Three-color indicator light for display of operating status. 5. Driving system:Driven and locked by double hydraulic cylinder, power of mold locking is 30 tons. 6. Large volume vacuum condensation system with spray function:?Greatly improves cooling speed and the vacuum effect, shorten the water cooling time. The temperature for demoulding is around 80 ℃. 7. Air distribution system with automatic air source shielding for rapid material filling. It improves the speed of filling gun changing and installing. 8. Pressurized cooling water system: Secure cooling under low water pressure. 9. Protection system:Protector of electromotor, protector of switch position on hopper strobe, protector of hydraulic pressure. They are used to keep normal operation and reduce rate of faulty products. 10. Stable steam decompressing and filtering function:It keeps the uniformity of heating and molding. 11. Adopt the central energy distribution valve and large flow steam valve and air valve with balance responsive controller to realize the instance filling. The steam flow, demoulding air, mandril pole air, and air cooling flow could be adjusted on the control board, greatly shorten production time and energy consumption. 12. Large volume hopper with filling position switch. Outlet port device is good to prevent reversing of materials. The hopper equipped with responsive balance controller to fill by pulse-type pressurization.

   EPS shape molding machine for production of foam (expandable polystyrene) EPS packaging, construction panel and ICF. It consumes half energy volume of common Chinese machines to process styrofoam. 1. Machine frame: Wholly welded by shape steel, high temperature annealing, and heat treatment. Surface derusted by sandblast and coated by spraying zinc. Adopt American epoxy polyamide paint as anticorrosive primers, and use acrylic paint as anticorrosive top coat. 2. 10.4 inch, 65536 color TFT touch screen and modular structured PLC. 3. Triple Air Filter 4. Display system:Digital voltage, ampere & temperature display system, fault monitoring alarm, wrong data input alarm system, and Three-color indicator light for display of operating status. 5. Driving system:Driven and locked by double hydraulic cylinder, power of mold locking is 30 tons. 6. Large volume vacuum condensation system with spray function& two liquid ring vacuum pumps 7. Air distribution system with automatic air source shielding for rapid material filling. 8. Pressurized cooling water system. 9. Protection system:Protector of electromotor, protector of switch position on hopper strobe, protector of hydraulic pressure. They are used to keep normal operation and reduce rate of faulty products. 10. Stable steam decompressing and filtering function 11. Adopt the central energy distribution valve and large flow steam valve and air valve with balance responsive controller to realize the instance filling. 12. Large volume hopper with filling position switch. The hopper equipped with responsive balance controller to fill by pulse-type pressurization.

  1. The whole machine framework is welded by profiled bar with complete open frame structure system2. Optional double-face mould fixing system3. Epoxide resin painting for facial protection4. 12.1 inch, 65,536-color TFT touch screen, PLC control system of modularized structure.5. Compressed air Filtering system of Three-Grades (first filtering, precise filtering and tiny filtering) with automatic water discharge.6. Motor protective system with motor protectors.7. Digital display of Voltage, Electrical current & Temperature system8. Monitoring alarm system for malfunction and fault data input.9. Rapid connector, rotary connector and pipeline system.10. Three-color lights displaying system for machine running status11. Components imported from Germany, Italy, South Korea and Japan12. The mould moving system driving by two hydraulic pressure cylinders with self-lubricating bearings.13. High speed differential, large oil tank volume and completely sealed hydraulic system.14. Automatic null positon setting system for the first startup.15. Automatic mould preheating system for the first startup.16. Vacuum extraction system with two vacuum hydraulic pumps.17. condensation system with vacuum pump condenser.18. Rapid air source distributing for injectors system with automatic air shielding .19. Pressurized cooling system for cooling.20. Encoder controls the moving of male mould with the precision of 0.35mm.21. Monitoring & protective system for the extremely Low pressure of steam, air, cooling water and hydraulic pressure.22. Steam Decompressing&filtering system with high precision23.Thermoforming system with Germany high precision PID pressure rate valve control, temperature sensor control, contact manometer control and timing control.24. Pressurized double-barrel system with vacuum filling, blower filling , filling position monitoring&control, vertical switch for filling strobe position monitoring&control.25. Improved mechanical demoulding system.26. Hydraulic driving system by 5.5Kw low power. ?

  1. The whole machine framework is welded by profiled bar with complete open frame structure system2. Optional double-face mould fixing system3. Epoxide resin painting for facial protection4. 12.1 inch, 65,536-color TFT touch screen, PLC control system of modularized structure.5. Compressed air Filtering system of Three-Grades (first filtering, precise filtering and tiny filtering) with automatic water discharge.6. Motor protective system with motor protectors.7. Digital display of Voltage, Electrical current & Temperature system8. Monitoring alarm system for malfunction and fault data input.9. Rapid connector, rotary connector and pipeline system.10. Three-color lights displaying system for machine running status11. Components imported from Germany, Italy, South Korea and Japan12. The mould moving system driving by two hydraulic pressure cylinders with self-lubricating bearings.13. High speed differential, large oil tank volume and completely sealed hydraulic system.14. Automatic null positon setting system for the first startup.15. Automatic mould preheating system for the first startup.16. Vacuum extraction system with two vacuum hydraulic pumps.17. condensation system with vacuum pump condenser.18. Rapid air source distributing for injectors system with automatic air shielding .19. Pressurized cooling system for cooling.20. Encoder controls the moving of male mould with the precision of 0.35mm.21. Monitoring & protective system for the extremely Low pressure of steam, air, cooling water and hydraulic pressure.22. Steam Decompressing&filtering system with high precision23.Thermoforming system with Germany high precision PID pressure rate valve control, temperature sensor control, contact manometer control and timing control.24. Pressurized double-barrel system with vacuum filling, blower filling , filling position monitoring&control, vertical switch for filling strobe position monitoring&control.25. Improved mechanical demoulding system.26. Hydraulic driving system by 5.5Kw low power.

  EPS lost foam molding machine is specialized in producing lost foam pattern(made of expandable polystyrene, styrofoam). 1. The whole machine framework is welded by profiled bar with complete open frame structure system2. Optional double-face mould fixing system3. Epoxide resin painting for facial protection4. 12.1 inch, 65,536-color TFT touch screen, PLC control system of modularized structure.5. Compressed air Filtering system of Three-Grades (first filtering, precise filtering and tiny filtering) with automatic water discharge.6. Motor protective system with motor protectors.7. Digital display of Voltage, Electrical current & Temperature system8. Monitoring alarm system for malfunction and fault data input.9. Rapid connector, rotary connector and pipeline system.10. Three-color lights displaying system for machine running status11. Components imported from Germany, Italy, South Korea and Japan12. The mould moving system driving by two hydraulic pressure cylinders with self-lubricating bearings.13. High speed differential, large oil tank volume and completely sealed hydraulic system.14. Automatic null positon setting system for the first startup.15. Automatic mould preheating system for the first startup.16. Vacuum extraction system with two vacuum hydraulic pumps.17. condensation system with vacuum pump condenser.18. Rapid air source distributing for injectors system with automatic air shielding .19. Pressurized cooling system for cooling.20. Encoder controls the moving of male mould with the precision of 0.35mm.21. Monitoring & protective system for the extremely Low pressure of steam, air, cooling water and hydraulic pressure.22. Steam Decompressing&filtering system with high precision23.Thermoforming system with Germany high precision PID pressure rate valve control, temperature sensor control, contact manometer control and timing control.24. Pressurized double-barrel system with vacuum filling, blower filling , filling position monitoring&control, vertical switch for filling strobe position monitoring&control.25. Improved mechanical demoulding system.26. Hydraulic driving system by 5.5Kw low power.

  1. The whole machine framework is welded by profiled bar with complete open frame structure system2. Optional double-face mould fixing system3. Epoxide resin painting for facial protection4. 12.1 inch, 65,536-color TFT touch screen, PLC control system of modularized structure.5. Compressed air Filtering system of Three-Grades (first filtering, precise filtering and tiny filtering) with automatic water discharge.6. Motor protective system with motor protectors.7. Digital display of Voltage, Electrical current & Temperature system8. Monitoring alarm system for malfunction and fault data input.9. Rapid connector, rotary connector and pipeline system.10. Three-color lights displaying system for machine running status11. Components imported from Germany, Italy, South Korea and Japan12. The mould moving system driving by two hydraulic pressure cylinders with self-lubricating bearings.13. High speed differential, large oil tank volume and completely sealed hydraulic system.14. Automatic null positon setting system for the first startup.15. Automatic mould preheating system for the first startup.16. Vacuum extraction system with two vacuum hydraulic pumps.17. condensation system with vacuum pump condenser.18. Rapid air source distributing for injectors system with automatic air shielding .19. Pressurized cooling system for cooling.20. Encoder controls the moving of male mould with the precision of 0.35mm.21. Monitoring & protective system for the extremely Low pressure of steam, air, cooling water and hydraulic pressure.22. Steam Decompressing&filtering system with high precision23.Thermoforming system with Germany high precision PID pressure rate valve control, temperature sensor control, contact manometer control and timing control.24. Pressurized double-barrel system with vacuum filling, blower filling , filling position monitoring&control, vertical switch for filling strobe position monitoring&control.25. Improved mechanical demoulding system.26. Hydraulic driving system by 5.5Kw low power.

  ? EPS shape molding machine for production of foam (expandable polystyrene) packaging, construction panel and ICF. It consumes half energy volume of common Chinese machines to process styrofoam. ? 1. Machine frame: Wholly welded by shape steel, high temperature annealing, and heat treatment. Surface derusted by sandblast and coated by spraying zinc. Adopt American epoxy polyamide paint as anticorrosive primers, and use acrylic paint as anticorrosive top coat. ? 2. 10.4 inch, 65536 color TFT touch screen and modular structured PLC. ? 3. Triple Air Filter ? 4. Display system:Digital voltage, ampere & temperature display system, fault monitoring alarm, wrong data input alarm system, and Three-color indicator light for display of operating status. ? 5. Driving system:Driven and locked by double hydraulic cylinder, power of mold locking is 30 tons. ? 6. Large volume vacuum condensation system with spray function& two liquid ring vacuum pumps ? 7. Air distribution system with automatic air source shielding for rapid material filling. ? 8. Pressurized cooling water system. ? 9. Protection system:Protector of electromotor, protector of switch position on hopper strobe, protector of hydraulic pressure. They are used to keep normal operation and reduce rate of faulty products. ? 10. Stable steam decompressing and filtering function ? 11. Adopt the central energy distribution valve and large flow steam valve and air valve with balance responsive controller to realize the instance filling. ? 12. Large volume hopper with filling position switch. The hopper equipped with responsive balance controller to fill by pulse-type pressurization.

  EPS shape moulding machine for production of foam (expandable polystyrene) packaging, construction panel and ICF. It consumes half energy volume of common Chinese machines to process styrofoam.? 1. The whole machine framework is welded by profiled bar with complete open frame structure system2. Optional double-face mould fixing system3. Epoxide resin painting for facial protection4. 12.1 inch, 65,536-color TFT touch screen, PLC control system of modularized structure.5. Compressed air Filtering system of Three-Grades (first filtering, precise filtering and tiny filtering) with automatic water discharge.6. Motor protective system with motor protectors.7. Digital display of Voltage, Electrical current & Temperature system8. Monitoring alarm system for malfunction and fault data input.9. Rapid connector, rotary connector and pipeline system.10. Three-color lights displaying system for machine running status11. Components imported from Germany, Italy, South Korea and Japan12. The mould moving system driving by two hydraulic pressure cylinders with self-lubricating bearings.13. High speed differential, large oil tank volume and completely sealed hydraulic system.14. Automatic null positon setting system for the first startup.15. Automatic mould preheating system for the first startup.16. Vacuum extraction system with two vacuum hydraulic pumps.17. condensation system with vacuum pump condenser.18. Rapid air source distributing for injectors system with automatic air shielding .19. Pressurized cooling system for cooling.20. Encoder controls the moving of male mould with the precision of 0.35mm.21. Monitoring & protective system for the extremely Low pressure of steam, air, cooling water and hydraulic pressure.22. Steam Decompressing&filtering system with high precision.23. Thermoforming system with Germany high precision PID pressure rate valve control, temperature sensor control, contact manometer control and timing control.24. Pressurized double-barrel system with vacuum filling, blower filling , filling position monitoring&control, vertical switch for filling strobe position monitoring&control.25. Improved mechanical demoulding system.26. Hydraulic driving system by 5.5Kw low power.

  EPS?ICF molding machine for production of ICF (insulated concrete forms) by foam (expandable polystyrene). It consumes half energy volume of common Chinese machines to process styrofoam with shorter cycle time. 1. Whole machine frame in weld profiled bar, complete open machine frame structure system2. Epoxide resin as primer and automobile surface painting for protection3. 12.1 inch, 65,536-color TFT touch screen, PLC module structure4. Control sofeware special for the manufacuring of CIF and package.5. First filtering, fine filtering and tiny filtering compressed air system.6. Motor protection system by motor protectors.7. Digital voltage, current & temperature display system.8.Failure inspection alarm, wrong data input alarm system.9. Rapid connector, rotary connector and stainless steel spliced for medium transfer & exhaust pipeline system.10. Three-color light for running display.11. Components importing from Germany, Italy, South Korea and Japan.12. Transferring mould system driving by two hydraulic pressure cylinders with self-lubrication bearing bearing.13. High speed differential, large volume oil tank and complete sealing hydraulic pressure system.14. Automatic null positon fitting at first start up. 15. Automatic mould preheating system for first startup.16. Vacuum extraction system by two vacuum hydraulic ring pumps.17. Two-phrase spraying, multi-row-tube type condenser for vacuum pump condensation system.18 Air distribution system with automatic air source shielding for rapid filling injection.19. Pressurized cooling water for cooling system.20. Encoder with precision of 0.35mm controls male mould running.21.? low pressure monitoring & protection system for steam, air, cooling water and hydraulic pressure.22. High precision decompressed filtering steam system23. High precision PID pressure rate valve control, temperature sensor control and contact manometer control heating system.24. Filling position monitoring control, vertical switch for filling valve strobe position monitoring control, vacuum filling, wind motor filling and pressurized & movable double-barrel system.25. Working medium focusing configuration system.26. 3.75 Kw low power hydraulic drive system.

  1. Whole machine frame in weld profiled bar, complete open machine frame structure system2. Epoxide resin as primer and automobile surface painting for protection3. 12.1 inch, 65,536-color TFT touch screen, PLC module structure4. Control software special for the manufacturing of lost foam and package.5. First filtering, fine filtering and tiny filtering compressed air system.6. Motor protection system by motor protectors.7. Digital voltage, current & temperature display system8.Failure inspection alarm, wrong data input alarm system9. Rapid connector, rotary connector and stainless steel spliced for medium transfer & exhaust pipeline system.10. Three-color light for running display11. Components importing from Germany, Italy, South Korea and Japan12. Transferring mould system driving by two hydraulic pressure cylinders with self-lubrication bearing bearing.13. High speed differential, large volume oil tank and complete sealing hydraulic pressure system.14. Automatic null positon fitting at first start up.15. Automatic mould preheating system for first startup.16. Vacuum extraction system by two vacuum hydraulic ring pumps.17. Two-phrase spraying, multi-row-tube type condenser for vacuum pump condensation system.18. Air distribution system with automatic air source shielding for rapid filling injection.19. Pressurized cooling water for cooling system.20. Encoder with precision of 0.35mm controls male mould running.21. Low pressure monitoring & protection system for steam, air, cooling water and hydraulic pressure.22. High precision decompressed filtering steam system23. High precision PID pressure rate valve control, temperature sensor control and contact manometer control heating system.24. filling barrel system special for the manufacturing of foam-lost.25. Working medium focusing configuration system.26. 3.75Kw low power hydraulic drive system.

  EPS shape moulding machine for production of foam (expandable polystyrene) packaging, construction panel and ICF. It consumes half energy volume of common Chinese machines to process styrofoam. ? 1. Whole machine frame in weld profiled bar, complete open machine frame structure system2. Double-face mould for fixing freely 3. Epoxide resin as primer and automobile surface painting for protection4.12.1 inch, 65,536-color TFT touch screen, PLC module structure, multifunction & five presetting redundant control system.5. First filtering, fine filtering and tiny filtering compressed air system.6. Motor protection system by motor protectors.7. Digital voltage, current & temperature display system 8.Failure inspection alarm, wrong data input alarm system 9. Rapid connector, rotary connector and stainless steel spliced for medium transfer & exhaust pipeline system.10. Three-color light for running display11. Components importing from Germany, Italy, South Korea and Japan12. Transferring mould system driving by two hydraulic pressure cylinders with self-lubrication bearing bearing.13. High speed differential, adjustable speed cylinder demoulding, large volume oil tank and complete sealing hydraulic pressure system.14. Automatic null positon fitting at first start up.15. Automatic mould preheating system for first startup.16. Vacuum extraction system by two vacuum hydraulic ring pumps.17. Two-phrase spraying, multi-row-tube type condenser for vacuum pump condensation system.18. Air distribution system with automatic air source shielding for rapid filling injection.19. Pressurized cooling water for cooling system.20. Encoder with precision of 0.35mm controls male mould running.21. Low pressure monitoring & protection system for steam, air, cooling water and hydraulic pressure.22. High precision decompressed filtering steam system.23. High precision PID pressure rate valve control, temperature sensor control and contact manometer control heating system.24. Filling position monitoring control, vertical switch for filling valve strobe position monitoring control, vacuum filling, wind motor filling and pressurized & movable double-barrel system.25. Demoulding system with four oil cylinders for choosing hydraulic demoulding or mechanical demoulding.26.Working medium focusing configuration system.27. 3.75Kw low power hydraulic drive system.

  EPS shape moulding machine for production of foam (expandable polystyrene) packaging, construction panel and ICF. It consumes half energy volume of common Chinese machines to process styrofoam.? 1. Whole machine frame in weld profiled bar, complete open machine frame structure system2. Double-face mould for fixing freely 3. Epoxide resin as primer and automobile surface painting for protection4.12.1 inch, 65,536-color TFT touch screen, PLC module structure, multifunction & five presetting redundant control system.5. First filtering, fine filtering and tiny filtering compressed air system.6. Motor protection system by motor protectors.7. Digital voltage, current & temperature display system 8.Failure inspection alarm, wrong data input alarm system 9. Rapid connector, rotary connector and stainless steel spliced for medium transfer & exhaust pipeline system.10. Three-color light for running display11. Components importing from Germany, Italy, South Korea and Japan12. Transferring mould system driving by two hydraulic pressure cylinders with self-lubrication bearing bearing.13. High speed differential, adjustable speed cylinder demoulding, large volume oil tank and complete sealing hydraulic pressure system.14. Automatic null positon fitting at first start up.15. Automatic mould preheating system for first startup.16. Vacuum extraction system by two vacuum hydraulic ring pumps.17. Two-phrase spraying, multi-row-tube type condenser for vacuum pump condensation system.18. Air distribution system with automatic air source shielding for rapid filling injection.19. Pressurized cooling water for cooling system.20. Encoder with precision of 0.35mm controls male mould running.21. Low pressure monitoring & protection system for steam, air, cooling water and hydraulic pressure.22. High precision decompressed filtering steam system.23. High precision PID pressure rate valve control, temperature sensor control and contact manometer control heating system.24. Filling position monitoring control, vertical switch for filling valve strobe position monitoring control, vacuum filling, wind motor filling and pressurized & movable double-barrel system.25. Demoulding system with four oil cylinders for choosing hydraulic demoulding or mechanical demoulding.26.Working medium focusing configuration system.27. 3.75Kw low power hydraulic drive system.

  EPS shape moulding machine for production of foam (expandable polystyrene) packaging, construction panel and ICF. It consumes half energy volume of common Chinese machines to process styrofoam. ?1. Whole machine frame in weld profiled bar, complete open machine frame structure system2. Double-face mould for fixing freely 3. Epoxide resin as primer and automobile surface painting for protection4.12.1 inch, 65,536-color TFT touch screen, PLC module structure, multifunction & five presetting redundant control system.5. First filtering, fine filtering and tiny filtering compressed air system.6. Motor protection system by motor protectors.7. Digital voltage, current & temperature display system 8.Failure inspection alarm, wrong data input alarm system 9. Rapid connector, rotary connector and stainless steel spliced for medium transfer & exhaust pipeline system.10. Three-color light for running display11. Components importing from Germany, Italy, South Korea and Japan12. Transferring mould system driving by two hydraulic pressure cylinders with self-lubrication bearing bearing.13. High speed differential, adjustable speed cylinder demoulding, large volume oil tank and complete sealing hydraulic pressure system.14. Automatic null positon fitting at first start up.15. Automatic mould preheating system for first startup.16. Vacuum extraction system by two vacuum hydraulic ring pumps.17. Two-phrase spraying, multi-row-tube type condenser for vacuum pump condensation system.18. Air distribution system with automatic air source shielding for rapid filling injection.19. Pressurized cooling water for cooling system.20. Encoder with precision of 0.35mm controls male mould running.21. Low pressure monitoring & protection system for steam, air, cooling water and hydraulic pressure.22. High precision decompressed filtering steam system.23. High precision PID pressure rate valve control, temperature sensor control and contact manometer control heating system.24. Filling position monitoring control, vertical switch for filling valve strobe position monitoring control, vacuum filling, wind motor filling and pressurized & movable double-barrel system.25. Demoulding system with four oil cylinders for choosing hydraulic demoulding or mechanical demoulding.26.Working medium focusing configuration system.27. 3.75Kw low power hydraulic drive system. ?

  EPS shape moulding machine for production of foam (expandable polystyrene) packaging, construction panel and ICF. It consumes half energy volume of common Chinese machines to process styrofoam. 1. Whole machine frame in weld profiled bar, complete open machine frame structure system2. Double-face mould for fixing freely 3. Epoxide resin as primer and automobile surface painting for protection4.12.1 inch, 65,536-color TFT touch screen, PLC module structure, multifunction & five presetting redundant control system.5. First filtering, fine filtering and tiny filtering compressed air system.6. Motor protection system by motor protectors.7. Digital voltage, current & temperature display system 8.Failure inspection alarm, wrong data input alarm system 9. Rapid connector, rotary connector and stainless steel spliced for medium transfer & exhaust pipeline system.10. Three-color light for running display11. Components importing from Germany, Italy, South Korea and Japan12. Transferring mould system driving by two hydraulic pressure cylinders with self-lubrication bearing bearing.13. High speed differential, adjustable speed cylinder demoulding, large volume oil tank and complete sealing hydraulic pressure system.14. Automatic null positon fitting at first start up.15. Automatic mould preheating system for first startup.16. Vacuum extraction system by two vacuum hydraulic ring pumps.17. Two-phrase spraying, multi-row-tube type condenser for vacuum pump condensation system.18. Air distribution system with automatic air source shielding for rapid filling injection.19. Pressurized cooling water for cooling system.20. Encoder with precision of 0.35mm controls male mould running.21. Low pressure monitoring & protection system for steam, air, cooling water and hydraulic pressure.22. High precision decompressed filtering steam system.23. High precision PID pressure rate valve control, temperature sensor control and contact manometer control heating system.24. Filling position monitoring control, vertical switch for filling valve strobe position monitoring control, vacuum filling, wind motor filling and pressurized & movable double-barrel system.25. Demoulding system with four oil cylinders for choosing hydraulic demoulding or mechanical demoulding.26.Working medium focusing configuration system.27. 3.75Kw low power hydraulic drive system. ?