Submersible Pump,Self-Priming Pump,Centrifugal Pump and more.

  Working Condition1.Max. Liquid temperature: 2oC-110oC2.Max. Ambient temperature:2oC-40oC3.Max. working pressure: 10 paApplicationCP serial pump can be used to delivery soft water, thin, clean, no-corrosive, non-explosive liquids without solid granules,fibres and mineral oil for circulation pipeline, water heat system and obturation-patterned industrial circulation system. The pump should be installed in enclosed places, or at least protected against inclement weather.Structure Material1.Pump Body:Cast Iron2.Motor Bracket:Cast Iron3.Immpeller:PPO4.Rator Can: Stainless steel

  Working Condition1.Max. Liquid temperature: 2oC-110oC2.Max. Ambient temperature:2oC-40oC3.Max. working pressure: 10 paApplicationCP serial pump can be used to delivery soft water, thin, clean, no-corrosive, non-explosive liquids without solid granules,fibres and mineral oil for circulation pipeline, water heat system and obturation-patterned industrial circulation system. The pump should be installed in enclosed places, or at least protected against inclement weather.Structure Material1.Pump Body:Cast Iron2.Motor Bracket:Cast Iron3.Immpeller:PPO4.Rator Can: Stainless steel

  The pump is decided by connection department and specialist, its properties and technique all reach to advanced level. It not only can direct self-sucking lower levels building's tap-water well pressure boost (within 6-8m) but also has many excellences, such as it can automatic switch (to order goods should make a footnote) low noise, beautiful styles, convenient loading and unloading, not need repair, which settled the technique difficult problems of ordinary pipeline pump only to can increase pressure and has sucking lift, it specially suits city apartments tap water to be not pressed or not enough water pressure, the hot water container unable to use and can't install pump in lower levels, it also wide applies city and countryside house, squares, hotels, gardens, parks, vehicles washing and so on. This pump need vertical installing, it at least runs once every day, ambient temperature no more than 50℃ centigrade, the delivering water quality for clean water, PH for 6-8.

  GP、ZB series of self-suction pump is designed according to the theory of vacuum self-suction. It can exhust automatically the breathed air in the pipe so as to obtain the vacuum self-suction effect. So, it is widely used for water drawing from a normal pressure-type well, steel-pipe well or added pressure water supply to high building. When added with automatic device, the self-suction pump can supply water, or increase the pressure in an automatic way, just like the running water. The above series have many kinds of products and different appearances, so as to meet the various needs of customers

  GP、ZB series of self-suction pump is designed according to the theory of vacuum self-suction. It can exhust automatically the breathed air in the pipe so as to obtain the vacuum self-suction effect. So, it is widely used for water drawing from a normal pressure-type well, steel-pipe well or added pressure water supply to high building. When added with automatic device, the self-suction pump can supply water, or increase the pressure in an automatic way, just like the running water. The above series have many kinds of products and different appearances, so as to meet the various needs of customers.

  DB、PM series of clean water pump has the feature of beautiful appearance, fine material, reasonable structure, unique design and easy installation. What’s more, it belongs to energy-saving pump. So, it won the great favor of the customers.

  PKM series of clean water pump adopts die-casting al-alloy as its case material, with beautiful appearance, smart size, low energy-consumption and high lift, etc.It features a simple structure and lowcost, suitable for domestic water supply and small-scalepark of trees and vegetation.

  Working Condition1.Suction lift up to 7 m2.Max. Liquid temperature: +40oC3.Max. Ambient temperature: +40oC4.Max. working pressure: 6 paApplicationCPM is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made. Widely used for farm irrigation, in particular for delivering water with small combination with small pressure sets. Structure material1.Pump Body  Cast iron or Aluminum2.Motor Bracket   Cast iron or Aluminum3.Immpeller  Brass4.Motor shaft   CS45#5.Mechanical seal   Graphite or Silicon carbide-carbide alloy

  FS plastic endure rotten pump, which is specially electric machinery and centrifugal plastic pump to form, the pump has many characteristics, such as beautiful pattern, simple structure, efficient, light, light weight, convenient carry and repair, wide using range and so on, it is deep welcomed by users. Because the pump uses the ABS of no poisonous (or strengthen polypropylene) materials, so it uses food, medicine, chemical industry, machinery, spinning and weaving, administer gold, papermaking and so on businesses, it uses as delivering the pellets’ sour, soda, salt solutions below 80 centigrade (except strong acid and strong bases) and organic solvent, cleaners, detergents and so on.

  Working Condition1.Max. Liquid temperature: +40oC2.Max. Ambient temperature: +40oCApplicationSD pump is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made. Widely used for well pumping,farm irrigation, daily water supplying, drainage in breeding industry. Structure Material1.Pump Body:Cast Iron 2.Motor Bracket:Cast Iron3.Immpeller:Aluminum or Brass4.Motor shaft:CS45# 5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

   Pump with plastic shell and built-in structure suitable for spraying, rinsing, watering flowers, etc. Model Power Max FlowL/min Max HeadM G/WKg LxWxHmm Quantity/20ftpcs W Hp GP250 250 0.33 85 6 4.3 220x160x310 25 GP350 350 0.47 100 7 4.5 220x160x310 25 GP400 400 0.55 120 8 4.5 220x160x310 25 GP550 550 0.75 165 10 4.7 220x160x310 25 GP750 750 1 200 11 4.7 220x160x310 25 GP800 800 1.1 208 12 5.0 220x160x310 25

  Working Condition1.Max. Liquid temperature: 35oC2.Max. Ambient temperature: 35oC3.Max. working pressure: 8 paApplicationVM serial pump is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made.Widely used for well pumping,farm irrigation, daily water supplying, drainage in breeding industry. Structure Material1.Pump Body:Cast Aluminum2.Motor Bracket:Cast Aluminum3.Immpeller:Rubber4.Motor shaft:CS45# 5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  Working Condition1.Suction lift up to 100 m2.Max. Liquid temperature: +40oC3.Max. Ambient temperature: +40oC4.Max. working pressure: 10 paApplicationQJD is recommended for pumping clean water with a sand content no higher than 150g/m3, mainly used for well pumping, river pumping, farm irrigation, water supply, mining, drainage in breeding industry.Structure material1.Pump Body：Stainless steel2.Motor Bracket：Stainless steel3.Immpeller：POM 4.Diffuser： Plastic

  Structure material1.Pump body: Stainless steel2.Suction stainer: Stainless steel3.Suction head:Brass4.Shaft:Stainless steel Model Volt./Frenq.(V/Hz) Power(KW) Q.rat.(m3/h) H.rat.(m) Outlet(mm) Dimension(cm) QGDb1.2-50-0.37 220/50 0.37 1.2 50 25 62x14x14 QGDb1.8-50-0.5 220/50 0.5 1.8 50 25 64x14x14 QGDb1-100-0.55 220/50 0.55 1 100 25 64x14x14 QGDb1.2-100-0.75 220/50 0.75 1.2 100 25 72x14x14 QGDb2.5-60-0.75 220/50 0.75 2.5 60 25 70x14x14 QGDb1.8-100-1.1 220/50 1.1 1.8 100 25 73x14x14

  Structure material1.Pump body: Stainless steel2.Suction stainer: Stainless steel3.Suction head:Brass4.Shaft:Stainless steel Model Volt./Frenq.(V/Hz) Power(KW) Q.rat.(m3/h) H.rat.(m) Outlet(mm) Dimension(cm) QGDa1.2-50-0.37 220/50 0.37 1.2 50 25 62x14x14 QGDa1.8-50-0.5 220/50 0.5 1.8 50 25 64x14x14 QGDa1-100-0.55 220/50 0.55 1 100 25 64x14x14 QGDa1.2-100-0.75 220/50 0.75 1.2 100 25 72x14x14 QGDa2.5-60-0.75 220/50 0.75 2.5 60 25 70x14x14 QGDa1.8-100-1.1 220/50 1.1 1.8 100 25 73x14x14 QGDa1.5-120-1.1 220/50 1.1 1.5 120 25 73x14x14 QGDa1-160-1.1 220/50 1.1 1 160 25 73x14x14

  Working Condition1.Max. Liquid temperature: +40oC2.Max. Ambient temperature: +40oCApplicationQY is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made.Widely used for well pumping,agriculture irrigation, water supplying for mining areas, site required for high head rate and large flow rate.Structure materialPump Body Cast ironMotor Bracket Cast ironImmpeller  Cast iron or aluminumMotor shaft  CS45#Mechanical seal  Graphite or Silicon carbide-carbide alloy

  Working Condition1.Suction lift up to 5 m2.Max. Liquid temperature: +40oC3.Max. Ambient temperature: +40oC4.Max. working pressure: 5 paApplication ZDB serial pump is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made. Widely used for well pumping,farm irrigation, daily water supplying, drainage in breeding industry.Structure Material1.Pump Body:Cast Iron2.Motor Bracket:Cast Iron3.Immpeller:Brass4.Motor shaft:CS45# 5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

   Working Condition1.Max. Liquid temperature: +40oC2.Max. Ambient temperature: +40oCApplicationST is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made.Widely used for farm irrigation, daily water supplying, drainage in breeding industry.Structure Material1.Pump Body:Cast Iron2.Motor Bracket:Cast Aluminum 3.Immpeller:Brass4.Motor shaft:CS45#5.Mechanical seal:Graphite or Silicon carbide-carbide alloy Model Volt./Frenq.(V/Hz) Power(KW) Q.rat.(m3/h) H.rat.(m) Outlet(mm) G/W(kg) Dimension(cm) ST-0.8-30-0.37 220/50 0.37 0.8 30 25 9 31.5x19.8x25

  Working Condition1.Suction lift up to 5 m2.Max. Liquid temperature: +40oC3.Max. Ambient temperature: +40oC4.Max. working pressure: 5 paApplicationJET pump is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made.Widely used for well pumping,farm irrigation, daily water supplying, drainage in breeding industry. Structure Material1.Pump Body:Cast Iron2.Motor Bracket:Cast Iron3.Immpeller:Brass 4.Motor shaft:CS45#5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  Working Condition1.Suction lift up to 5 m2.Max. Liquid temperature: +40℃3.Max. Ambient temperature: +40℃ 4.Max. working pressure: 5 paApplicationQDX(T) is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made.Widely used for well pumping,farm irrigation, daily water supplying, drainage in breeding industry. Structure material1.Pump Body:Cast iron 2.Motor Bracket:Cast iron 3.Immpeller:Aluminum or Plastic4.Motor shaft:CS45#5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  Working Condition1.Suction lift up to 10 m2.Max. Liquid temperature: +40oC3.Max. Ambient temperature: +40oC4.Max. working pressure: 6 paApplicationWQD is recommended for draining dirty water in domestic and civil sectors. WQD is allowed to pump liquids containing suspended solid bodies with dimensions up to 35 mm and short fibres. Ideal using in the industrial site,mining area,farm field.Structure material1.Pump Body:Cast iron2.Motor Bracket:Cast iron3.Immpeller:Cast iron4.Motor shaft:CS45# 5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  Working ConditionMax. Liquid temperature: +40℃Max. Ambient temperature: +40℃ApplicationQD is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made. Widely used for well pumping,agriculture irrigation, water supplying for high building, site required for high head rate.Structure materialPump Body Cast ironMotor Bracket Cast ironImmpeller Cast iron or aluminumMotor shaft CS45#Mechanical seal Graphite or Silicon carbide-carbide alloy

  Working Condition1.Suction lift up to 10 m2.Max. Liquid temperature: +40oC3.Max. Ambient temperature: +40oC4.Max. working pressure: 6 paApplicationWQ is recommended for draining dirty water in domestic and civil sectors. WQ is allowed to pump liquids containing suspended solid bodies with dimensions up to 35 mm and short fibres. Ideal using in the industrial site,mining area,farm field.Structure material1.Pump Body:Cast iron2.Motor Bracket:Cast iron3.Immpeller:Cast iron4.Motor shaft:CS45#5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  Working Condition1.Suction lift up to 10 m2.Max. Liquid temperature: +40oC3.Max. Ambient temperature: +40oC4.Max. working pressure: 6 paApplicationWQKD(G) is recommended for pumping sewage with small round particles, particles in sewage shall be under 2%. Ideal using in the industrial site,mining area,farm field for pumping sewage or dirty water.Structure material1.Pump Body:Cast iron2.Motor Bracket:Aluminum3.Immpeller:Cast iron4.Motor shaft:CS45#5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  Working Condition1.Suction lift up to 10 m2.Max. Liquid temperature: +40oC3.Max. Ambient temperature: +40oC4.Max. working pressure: 6 paApplicationWQBD(D) is recommended for pumping sewage with suspended solid bodies with up to 15mm. Widely use for pumping sewage, dirty water or drainage water in constructuring site, hotel, forestry,mining area, civil sewage.Structure material1.Pump Body:Cast iron2.Motor Bracket:stainless steel3.Immpeller:Cast iron4.Motor shaft:CS45# 5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  Working Condition1.Suction lift up to 10 m2.Max. Liquid temperature: +40℃3.Max. Ambient temperature: +40℃4.Max. working pressure: 6 paApplicationWQBD(B) is recommended for pumping sewage with small round particles, particles in sewage shall be under 2%. Ideal using in the industrial site,mining area,farm field for pumping sewage or dirty water.Structure material1.Pump Body:Cast iron2.Motor Bracket:Aluminum or iron3.Immpeller:Cast iron4.Motor shaft:CS45#5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  1.Suction lift up to 5 m2.Max. Liquid temperature: +40℃3.Max. Ambient temperature: +40℃4.Max. working pressure:5 paApplicationWQBD(A) is recommended for pumping sewage with small round particles, particles in sewage shall be under 2%. Ideal using in the industrial site,mining area,farm field for pumping sewage or dirty water.Structure material1.Pump Body:Cast iron2.Motor Bracket:Cast aluminum3.Immpeller:Cast iron4.Motor shaft:CS45#5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  Working Condition1.Suction lift up to 5 m2.Max. Liquid temperature: +40oC3.Max. Ambient temperature: +40oC 4.Max. working pressure: 5 paApplicationQDN is recommended for pumping clean water without abrasive paricles and liquids or seawater(PH 4-10).Mainly used for garden irrigation, car washing, hotel or home water supplying.Structure material1.Pump Body:304# Stainless steel2.Motor Bracket:304# Stainless steel3.Immpeller:304# Stainless steel4.Motor shaft:CS45#5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  Working Condition 1.Suction lift up to 5 m2.Max. Liquid temperature: +40oC3.Max. Ambient temperature: +40oC 4.Max. working pressure: 5 pa Application QDX is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made. Widely used for well pumping,farm irrigation, daily water supplying, drainage in breeding industry.Structure Material 1.Pump Body:Cast Aluminum2.Motor Bracket:Cast Aluminum3.Immpeller:Aluminum4.Motor shaft:CS45#5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  Working Condition1.Suction lift up to 5 m2.Max. Liquid temperature: +40℃3.Max. Ambient temperature: +40℃ 4.Max. working pressure: 5 paApplicationQDX is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made. Widely used for well pumping,farm irrigation, daily water supplying, drainage in breeding industry.Structure Material1.Pump Body:Cast Aluminum 2.Motor Bracket:Cast Aluminum 3.Immpeller:Aluminum 4.Motor shaft:CS45# 5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  1.Suction lift up to 5 m2.Max. Liquid temperature: +40℃3.Max. Ambient temperature: +40℃ 4.Max. working pressure: 5 paApplicationQDX is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made. Widely used for well pumping,farm irrigation, daily water supplying, drainage in breeding industry.Structure Material1.Pump Body:Cast Aluminum 2.Motor Bracket:Cast Aluminum 3.Immpeller:Aluminum 4.Motor shaft:CS45# 5.Mechanical seal:Graphite or Silicon carbide-carbide alloy

  Working Condition1.Suction lift up to 5 m2.Max. Liquid temperature: +40oC3.Max. Ambient temperature: +40oC4.Max. working pressure: 5 paApplicationQDX is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the metarial of which pump is made.Widely used for well pumping,farm irrigation, daily water supplying, drainage in breeding industry. Structure Material1.Pump Body:Cast Aluminum2.Motor Bracket:Cast Aluminum3.Immpeller:Aluminum4.Motor shaft:CS45# 5.Mechanical seal:Graphite or Silicon carbide-carbide alloy