Offer List

Characteristics： The machine is made up of 3 machine heads, machine frame, electric control tank and material supporting fame etc. The left machine heads has horizontal moving mechanism, and move 20mm along the track with the control of the program. There are fixing mechanism, pressing mechanism, heating mechanism and head box etc. on machine head. The machine is used for PVC window and door welding processing; it can achieve the whole welding processing individually. It features advanced technology, reliable function, and easy operation. It adopts PC control, pneumatic driving and locating. The movable stand adopts non-oil lubricating bearing and linear ball bearing that make it of high precision, easy operation, and convenient maintenance. One of the machine heads can be used for welding processing with variable angles; it is also suitable for special shaped window welding like arch window. The 3 machine heads can be used individually and jointly. It enable welding for such shapes as ┗ ┠ ┮ ┏┓┳┳ ┯┯┿ ┿┿, is the ideal equipment for welding processing for PVC window and door. The three machine heads can be combined at will. Parameter： Input power source 380V 50Hz Total power 4.5KW Working air pressure 0.5-0.8Mpa Air consumption 200L/min Welding height 20-100mm Max welding width 120mm Welding size 400-4500mm Dimension 5500 x 1000 x 1700 Weight 1400Kg

Characteristics： 1. Adopt the imported low-voltage electric apparatus component, sensor. The equipment is automatically controlled by PLC for the whole operation. 2. This machine is in high efficiency; it has storage room for little piece glass. The washing glass can be input continuously. 3. Adopt the pro-face touch-sensitive screen, which is easy to operate. can dynamic display the operation and trouble situation of the machine. 4. The special Air-floating transfer technology system will avoid the second pollution when using the roller system. 5. Save-energy, un-continue automatic operation system. Check and plate pressing section can speed up. If the other parts not at work, they will be in intellectual dormancy state. 6. The roller adopts the bridge type structure, which can avoid the roller sink as it affords so much for a long time. 7. The machine can produce big & small (optional) insulating glass. Parameter： Power supply: 380V 50Hz Total power: 28Kw Washing speed: 2-12m/min Max. working speed: 32m/min Min. glass size: 400×600mm Max. glass size: 2500×3000mm Max. Insulating glass thickness: 50mm Washing glass thickness: 8-48mm Max.in accelerating: 48m/min Air consumption: 800L/min Dimension: 21000×2500×3600mm Total weight: 4200kg

The machine is made up of saw heads, working table, machine frame, etc. Air pressure drives feeding and pressing, and the speed can be adjusted. It features swinging feeding and high cutting precision. There are movable shields on the saw heads. The working table moves agility, and can be locked in the location what do you need. The machine is used for 45-90 degree cutting processing of PVC profile with single or double saw heads. It features high efficiency and flexible operation and is the necessary equipment for PVC door processing.

Introduction: Used for bending aluminium alloy channel material, angle material, flat material etc. Also used for bending iron and stainless steel. Can bend the whole round and circular arc of arbitrary diameter, operation is convenient, the production rate is high, and can make bending mold according to the particular condition of aluminum material, the mold exchanges conveniently. This machine can assemble bending channel mold on one side and self-made bending mold on the other side. The bending range is wide, specially used for decoration craft. Technical Parameter Power 380V 50HZ Power 0.55KW Speed 45rpm The max of curving 100x25mm Min. curved profile diameter 450mm Max. curved profile diameter 800mm

Characteristics： 1、Main device are imported 2、Butyl spreading is well-proportioned and the linearity is good 3、It adopts the unique hermetic piston device 4、Reasonable butyl spreading system and low pressure 5、Advanced device guarantees the best spreading effcet on the arc aluminum frame Parameter： Power supply: 380V/50Hz Total power: 1.89Kw Transmit speed: 0～35m/min Temperature: 120～140℃ Air pressure: 0.6～0.8MPa Squee pressure: 12～16MPa Adjustable range: 6～16mm Air consumption: 50L/min Dimension: 3430×700×1236mm Total weight: 800kg

Characteristics： Used for processing of holes and slots of alu-alloy doors and windows, and realizes vertical process.  Imported special alu-alloy cutters to improve the precision and efficiency.  It features the compact structure and the small volume.  The processing precision and the smoothness have come to the advanced standard in the world. Parameter： Milling sag：±0.1mm Milling harshness：Ra12.5 µ m Power supply：220V 50Hz 　/380V 50Hz Motor power：1.5KW Rotary speed：2800rpm Air pressure：0.5-0.8Mpa Diameter of milling cutter：Φ5mm Copying dimension：290×90mm（vertical） Overall dimension：870mm×700mm×1500mm Weight：250Kg

Characteristics： This machine mainly consists of machine heads, hand driven lift mechanism, profile-holding worktable, machine framework, and electric chest. The whole machine is normally equipped with three machine heads: right machine head, middle machine head, and right machine head. According to different requirements, we can select different allocations such as allocations of left machine head, middle head, low machine head), allocation (middle machine head, right machine head, and low head machine), and so on. All the working combination of every machine heads can be completed through the select switch on the electric chest. This machine uses module structure. During running, all the machine heads can single work, or selected interlock work, which is free to select, easy to control. It is mainly used for processing water slot on PVC profile. Parameter： Input power source(single-phase) 220V 50Hz Total power 1.14KW Working pressure 0.4-0.8Mpa Air consumption 95L/min Machine head quantity 3 Machine head electromotor(Power) 0.38KW Machine head electromotor(Rev) 25000r/min Max. milling depth 30mm Milling length 60mm Diameter of milling cutter Ф5mm Dimension 2100 x 860 x 1500mm Weight 210Kg

Characteristics： This machine mainly consists of machine heads, hand driven lift mechanism, profile-holding worktable, machine framework, and electric chest. The whole machine is normally equipped with three machine heads: right machine head, middle machine head, and right machine head. According to different requirements, we can select different allocations such as allocations of left machine head, middle head, low machine head), allocation (middle machine head, right machine head, and low head machine), and so on. All the working combination of every machine heads can be completed through the select switch on the electric chest. This machine uses module structure. During running, all the machine heads can single work, or selected interlock work, which is free to select, easy to control. It is mainly used for processing water slot on PVC profile. Parameter： Input power source(single-phase) 220V 50Hz Total power 1.14KW Working pressure 0.4-0.8Mpa Air consumption 95L/min Machine head quantity 3 Machine head electromotor(Power) 0.38KW Machine head electromotor(Rev) 25000r/min Max. milling depth 30mm Milling length 60mm Diameter of milling cutter Ф5mm Dimension 2100 x 860 x 1500mm Weight 210Kg

Characteristics：  Used for aluminum profile end processing, and suitable for various profiles.  Clamp one time can process multi-piece profiles, which increased the processing efficiency.  Convenient tool adjustment to meet different processing requirement.  Need not ordering tools when process various profiles, thus can decrease cost and save time.  Large tool diameter, high milling speed and good processing result.  Our machine is specially designed with safe guards, and they clip the profiles tight, even when electricity is cut off suddenly. So it can ensure the operators’ safety. Parameter： Harshness：Ra12.5 µ m Power supply：220v/380V 50Hz （Three-phase, four-wire） Motor power: 3*1.5KW Rotary speed：2800rpm Air pressure：0.5-0.8Mpa Diameter of milling cutter：250mm/32mm Motor adjusted travel：0-80mm Overall dimension：2400×1250×1900㎜ Weight：450㎏

This machine is one of the necessary equipment for processing PVC Window and Door.It can weld many shapes according to their intercombination such as ┗ ┣  ┳ ┏┓ ┳╋  ╋ etc. . It features advanced technique, pneumatic drive, PC control, stable capability and simple operation. its two working parts can work singly, synchronously or do combinational working ,One of the machine heads can be used for welding processing with variable angles .It adopts on-oil lubricating bearing and linear moving bearing make high precision and convenient maintaining. The machine has a longer life. This machine is made up of two heads, frame, electric controller box, profile-holding frame, etc. The left head can move 20mm by following the track. Every head has their separate location structure, pressing structure, heating structure and head box.

Main Features: 1. This machine has the self- diagnosis function, which is easy for check the error. 2. The machine has automatic and the manual two operating modes. They are more convenient and succinct; 3. It adopts the multistage frequency conversion control and multi-speed revolution optimization function and it can realize each kind of size glass movement automatically. 4. Every transportation partial adopts stops the cushion function, which can avoid phenomenon which appears the glass and the equipment localization occurs dashes. And effectively reduces the glass to transport a turn of attrition. 5. Air blowers adopts graduation time delay starter, effectively avoids the initial firing current oversized phenomenon. 6. Cleaning dryer and the water tank was made by stainless steel processing manufacture, transmits the roller for to bear the acid and alkali rubber roller, according to the glass thickness transmission roller spacing may the automatic control. 7. Inspections transmissions and the aluminum frame assembly machine adopt the double fast transmission, highly effective energy conservation May realize automatic processing to the ultra long glass, three glass and the size piece glass. (This item for specially request) 8. The press panel board of panel pressure board adopts to imported osculum, the press system and panel press system are controlled by the Servo motor system, which guarantee the two pieces glass press together safely and steadily and the processing accuracy. Parameter： Technique parameters：　Power supply： 380V 50Hz Air consumption: 200L/min Power： 23kW Max. process dimension： 2500×1800mm 　Min. process dimension： 400×600mm 　Max thickness of the insulating glass： 40mm 　Convey speed： 8-48m/min 　Dimension： 15000×2500×2800mm

Characteristics： 1. This machine has the self- diagnosis function, which is easy for check the error. 2. The machine has automatic and the manual two operating modes. They are more convenient and succinct; 3. It adopts the multistage frequency conversion control and multi-speed revolution optimization function and it can realize each kind of size glass movement automatically. 4. Every transportation partial adopts stops the cushion function, which can avoid phenomenon which appears the glass and the equipment localization occurs dashes. And effectively reduces the glass to transport a turn of attrition. 5. Adopt the electricity saving pattern, when the conveyer puts in the glass which can automatic start. It doesn’t have the glass time delay automatic shut-off, saves the power consumption. 6. Air blowers adopts graduation time delay starter, effectively avoids the initial firing current oversized phenomenon. 7. Cleaning dryer and the water tank was made by stainless steel processing manufacture, transmits the roller for to bear the acid and alkali rubber roller, according to the glass thickness transmission roller spacing may the automatic control. 8. Inspections transmissions and the aluminum frame assembly machine adopt the double fast transmission, highly effective energy conservation May realize automatic processing to the ultra long glass, three glass and the size piece glass. (This item for specially request) 9. The press panel board of panel pressure board adopts to imported osculum, the press system and panel press system are controlled by the Servo motor system（screw convey）, which guarantee the two pieces glass press together safely and steadily and the processing accuracy. Parameter：　　Power supply： 380V Air consumption: 200L/min Power： 17.58kW Max. process dimension： 2000*1600mm 　　Min. process dimension： 500*300mm 　　Max thickness of the insulating glass： 40mm 　　Convey speed： 12-40m/min 　　Weight： 4000kg 　　Dimension： 12500*2000*2300mm