Offer List

  Usage：?It is applicable to curling the plastic brim, which would increase the intensity of plastic round container brim with such features of practical, handsome appearance. Main Technical Parameter:Power: 180WExtension of Curling: 80-200(mm)Heating plate power: 2.4(KW)Dimension: 800×800×1550(mm)Weight: 300(kg)

  Usage: FJL Series is designed to produce monolayer PP/PS/PE plastic sheet, which is used to make disposable water drinking cups, ice-cream cups, disposable cup/bowl for yoghurt, lids, dishes, plates and etc. Major Construction Features: A)The main parts, such as screw, barrel, adopt superior 38CrMoAIA material, which is featured by high hardness, anticorrosive advantages B)The special designed screw adopts big L/D Ratio to ensure the good plasticizing, stable extrusion and high output. C)Screen Exchanger: It is controlled by motor and its operation is very easy(We can also adopt hydraulic style fast screen exchange with double filters according to customers' demand). Note: Special specification and configuration of products can be designed according to customers'demand.? ?

  Usage：FJL Series is designed to produce monolayer PP/PS/PE plastic sheet, which is used to make disposable water drinking cups, ice-cream cups, disposable cup/bowl for yoghurt, lids, dishes, plates and etc. Major Construction Features:1、The main parts, such as screw, barrel, adopt superior 38CrMoAIA material, which is featured by high hardness, anticorrosive advantages2、The special designed screw adopts big L/D Ratio to ensure the good plasticizing, stable extrusion and high output.3、Screen Exchanger: It is controlled by motor and its operation is very easy(We can also adopt hydraulic style fast screen exchange with double filters according to customers’ demand)。 Note: Special specification and configuration of products can be designed according to customers’ demand. Main Technical Parameter：Material Used: PP、PS、HIPS、PESheet Width:? ≤690mmSheet Thickness: 0.3-2.0mmLayer: 1Extrusion Capacity: ≤260Kg/hScrew Dia.: 120mmRoller Dia.: 350mmMotor Power: 75KWOverall Power: 130KWOverall Dimension: 12.0*2.0*2.2Weight: 7.5TPower Supply: 380V/50HZ, Tri-phase, Four-wire

  Major Construction Features:EPS foam sheet unit adopts the up-to-date gondi double-stage high foam technology. It is made up of primary screw, secondary screw, butane pump, extruding mould head, molding device, traction machine and take-in machine. This unit uses the general polystyrene as raw material. In the extruding process, vesicant is injected at high pressure. After the extrusion, foaming, cooling, molding and traction, it is collected as finished product. After being molded in the vacuum condition, it can be made into various packaging vessels, such as single-use fast food box, aquatic product dish, supermarket dish, cake dish, KT sheet and instant noodles bowl etc. This machine uses a high speed automatic screen changing device, which features advanced structure, stable performance, easy operation, high automation and screen change without shutdown. ? Main Technical Parameter:Name/Parameter: FJL120/150Output: 240-340kg/hSheet Thickness: 0-6-4mm (adjustable)Sheet Width: 450-1250mmExpansion: 10-20 Dimension: 3*4.5*33Installed Capacity: 120kwPower Supply: 380V/50HZ, Tri-phase, Four-wire

  Major Construction Features:FJL-660SB Series Automatic Hydraulic Cup Making Machine is new equipment, which has been developed and produced with many years of machine producing experiences of our company, it uses stable hydraulic system and pneumatic technology to control together, its operation is stable, noise is small, mold locking ability is strong and quality is high. It mainly consists of formed machine, material rack, material receiving machine and screen controlled by electricity.1. The machine is completely automatic, productive speed is fast. Different products can be produced with different molds. 2. It uses import famous brands of electric and pneumatic fittings, so the operation is stable, quality is reliable and life is long. 3. The design of the mold is advanced and special, heat the thermoplastic plastic flake board and put on the mold, pull the piston, give the pressure to the air, keep the flake board close to the inside of the mold to form, then, cut and automatically blow the product. The structure of the whole machine is compact, one mold has all the functions, like pressure giving, forming, cutting, cooling, and finished product blowing, so the process is short, quality of the finished product is high and matches with national sanitary standard. Main Technical Parameter:Material Used: PP、HIPS、PE、PS、PET、PVC Sheet RollSheet Width: 300-660mmSheet Thickness：0.2-2mmForming Speed：15~30moulds/minuteForming Depth：≤125（mm）Max. Sheet Roll Dia.：700mmMax. Forming Area：650×320mmMain Motor Power：7.5KWOverall Power：≤66KWWorking Air Pressure：0.6~0.8MPa (1.6m³/min)Overall Dimension：3.4×1.6×2.3（m）Weight：Round 4300KgPower Supply: 380V/50HZ, Tri-phase, Four-wire

  Usage：The FJL-500ZB series automatic plastic-exhaust case folding machine is the ideal equipment for exhaust packaging production. It is suitable for the automatic folding of the three sides of various kinds of plastic-exhaust cases including articles of daily use, hardware coverings, children’s toys and other small commodities. Character Of Constructions:This machine has a high degree of automation. Each of the three heating plates has an independent heating control device to achieve an automatic adjustment of the heating of each side. When in automatic working mode, it has the photoelectric protection ability. Main Technical Parameter:Power Source: 220/50(V/Hz)Max.folding size: 450x550(mm)Output: 15(Times/min)Power: 1.6(Kw)Dimension: 950*890*1500(mm) Weight: 200(Kg)

  Usage：?It is applicable to curling the plastic brim, which would increase the intensity of plastic round container brim with such features of practical, handsome appearance. Main Technical Parameter:Power: 180WExtension of Curling: 80-200(mm)Heating plate power: 2.4(KW)Dimension: 800×800×1550(mm)Weight: 300(kg)

  Usage：FJL-610/860BZD Series Vacuum Forming Machines are suitable for processing those reeling sheets including PVC, PS, PSP, PP, PET, PP etc. It can be used for producing different specification of plastic containers, suh as disposable fast-food containers, instant noodle bowls, western dinner plates, food packing containers (such as sugar boxes, cake boxes and etc. ), plastic containers for packing articles of daily use, hardware coverings, children’s toys and etc. Character of Construction: 1. This machine has a small size, which makes it easy to operate. In a sense, it is the ideal forming machine to process little amount of plastic materials.2. Equipped with a remote infrared heater, the temperature can be adjusted slightly so as to get an even temperature.3. FJL-610/860BZD Series Semi-automatic Vacuum Forming Machine is easy to operate and the cost is lower.4. Equipped with a high effective cold-water sprayer, this machine can ensure the quality of the forming and accelerate the forming speed.5. The electronic components of the controlling part, which are manufactured abroad, can semi-automatically control the electric current and makes it easy to operate. Main Technical Parameter:Thickness of sheet: 0.1-1.2mmLength of forming: 860mmWidth of forming: 610mmHeight of forming: ≤140mmSuitable material: PP, PS, HIPS, PVC, PET and etcOutput: 3-8cycles/minOven heater power: 15KWSpeed ratio of suction: ≤75 m3/hExhausted air volume: ≤0.7 m3/hPower Source: 380/220V,50Hz, TriphaseDimensions: 3.0m*1.4 m*2.0mWeight: 1.2T

  UsageIt is suitable to form BOPS 、HIPS、PS、PVC and PET plastic sheets etc., which can produce various of boxes 、dishes、trays、bowls and lids, such as food boxes、cake boxes、fast-food boxes、supermarket trays、injection trays、oral liquids trays etc. Main Technical ParameterMax. Forming Area: 510×570mmMax. Forming Height: ≤120mmSheet Thickness Range: 0.15-1mmMax. Dia. of Sheet Roll: 710mmMax. Cutting Length: 5500mmSuitable Material: BOPS、HIPS、PS、PVC、PET and etcOutput: 10-25cycles/minMould Platen Heating Power: 10KWExhausted air volume: 1.2 m3/minPower Source: 1.2 m3/minWater Consumption: 0.01 m3/minPower Source: 380V,50Hz, Tri-phaseDimensions: 2.75×1.41×2.15(m)Weight: 2.5T

  Major Construction Features:FJL-660SB Series Automatic Hydraulic Cup Making Machine is new equipment, which has been developed and produced with many years of machine producing experiences of our company, it uses stable hydraulic system and pneumatic technology to control together, its operation is stable, noise is small, mold locking ability is strong and quality is high. It mainly consists of formed machine, material rack, material receiving machine and screen controlled by electricity.1. The machine is completely automatic, productive speed is fast. Different products can be produced with different molds. 2. It uses import famous brands of electric and pneumatic fittings, so the operation is stable, quality is reliable and life is long. 3. The design of the mold is advanced and special, heat the thermoplastic plastic flake board and put on the mold, pull the piston, give the pressure to the air, keep the flake board close to the inside of the mold to form, then, cut and automatically blow the product. The structure of the whole machine is compact, one mold has all the functions, like pressure giving, forming, cutting, cooling, and finished product blowing, so the process is short, quality of the finished product is high and matches with national sanitary standard. Main Technical Parameter:Material Used: PP、HIPS、PE、PS、PET、PVC Sheet RollSheet Width: 300-660mmSheet Thickness：0.2-2mmForming Speed：15~30moulds/minuteForming Depth：≤125（mm）Max. Sheet Roll Dia.：700mmMax. Forming Area：650×320mmMain Motor Power：15KWOverall Power：≤76KWWorking Air Pressure：0.6~0.8MPa (1.6m3/min)Overall Dimension：3.4×1.6×2.3（m）Weight：Round 4300KgPower Supply: 380V/50HZ, Tri-phase, Four-wire

  Usage：FJL Series Multilayer Plastic Sheet Extruder is designed on the base of Monolayer Plastic Sheet Extruder and adopts advanced technology from domestic and abroad. It’s applicable to produce Multilayer PP/PS/PE plastic sheet, which is used to make disposable water drinking cups, ice-cream cups, disposable cup/bowl for yoghurt, lids, dishes, plates and etc. ? Major Construction Features:1、The main parts, such as screw, barrel, adopt superior 38CrMoAIA material, which is featured by high hardness, anticorrosive advantages2、The special designed screw adopts big L/D Ratio to ensure the good plasticizing, stable extrusion and high output.3、T-Die: It’s made of super quality alloy steel and adopts adjustable restrictor bars, providing the even pressure of the plastic flow at the die lips. It ensures even thickness of the boards with adjustable lips.4、Screen Exchanger: It adopts hydraulic style fast screen exchange with double filters. ? Main Technical Parameter:Model: FJL-660PC IIMaterial Used: PP、PS、HIPS、PESheet Width: ≤690mmSheet Thickness：0.3-2.0mmLayer: 2Extrusion Capacity: ≤210Kg/hMain/Auxiliary Screw Dia.: 110-80mmRoller Dia.: 350mmMain/Auxiliary Motor Power: 45-30KWOverall Power: 120KWOverall Dimension: 11.5*2.0*2.2Weight: 7TPower Supply: 380V/50HZ, Tri-phase, Four-wire

  Major Construction Features:The machine is a combination of Extruder, Vertical Three-roller Calender, Haul-off Unit, Cutting Unit, Rewinder and Electrical Control Cabinet and ect. The barrel, screw, screen changer and die head are made of high quality alloyed steel (38CrMoAIA) with high hardness, treatment. The die head is adopted hanger-type branch pipe decreasing-style construction, so the flow passage is convenient for solution to flow without stagnation, and the thickness of products will be smooth and even. The felt wrapped circulation and cooling inside roll and bring a prefect effect. The temperature of die head, mesh changer and the drum separately controlled. All drive system runs synchronously. Application Area:It is used for producing various monolayer and multilayer plastic board of PP/PS/HIPS/PE with thickness of 0.1mm to 5mm and width of up to 2500mm, which can be widely used for producing different kind of plastic container, stationery sheet and ect.

  Six-Color Curved Surface Offset Printer (FJL-6) We adopt advanced international technology and make considerable innovations on design, manufacturing and accessories for FJL-6 Six-color Camber, Rotay offset Machine adopts, ensuring flexible, convenient and stable and reliable operation, function and maintenance. This machine uses 45 ti enter the cup, in front of Lydia electronics corona processing, location UV solidifies, the signature is clear. The main electrical machinery, the movement is steady and has lower noise. Convenient adjustment of ink supply and mouse roller pressure and ideal ink supply. Positioning spring automatic strain of for mei installation produces easy upper and down former and tipping former arrangement. Supension arm of printing cylinder and former roller ensure simple and reliable release pressure regulation. It can be sued as four-color and five-color machine ti meet user requirements. Main parameter: Printing diameter: ￠40-￠100 Max. printing length: 110mm Max. printing bevel: 12° Max: printing speed: 20000 cups/hour Printing Plate size: 510×116×1mm Total power:18Kw Overall dimension: 6600×3000×2700mm ? ?

  Main Features: Full complete production line of plastic cups Full automatic: Adopts servo motor and PLC Features: This is full-automatic plastic cup making machine which adopts servo-motor to feed and draw sheet. It controls by PLC and touch screen. 1)It is used to produces such plastic products as disposable plastic cups, plastic bowls, ice cream cups, cold drinking cups, yoghurt cups, instant-food boxes and bowls, plastic dishes, plastic trays, plastic covers, plastic lids, vessels for fast food and pharmaceutical linings. 2) Its forming sheets as PP, PVC, PS, and PET and other sheet. 3) It adopts PLC and touch screen control equipment operation. 4) Mould adopts two cell guides position fixing. 5) Mould movement adopts hydraulic pressure drive. 6) Mechanism movement adds automatically oil to lubricate at certain time. 7) Temperature controller module controls each temperature area. 8) It can finish production at one time through sheet feeding, heating, stretching, forming and in-mould cutting. 9) It can produce different products by different moulds. 10) Stable operation and reliable performance, low noise, high quality.

  Usage：FJL-660SB-A Fully-Automatic Plastic Thermoforming Machine is used to produce disposable water drinking cups, ice-cream cups, disposable cup/bowl for yoghurt, lids, dishes, plates and etc.Major Construction Features:FJL-660SB-A Automatic Hydraulic Cup Making Machine is new equipment, which has been developed and produced with many years of machine producing experiences of our company, it uses stable hydraulic system and pneumatic technology to control together, its operation is stable, noise is small, mold locking ability is strong and quality is high. It mainly consists of formed machine, material rack, material receiving machine and screen controlled by electricity.1. The machine is completely automatic, productive speed is fast. Different products can be produced with different molds. 2. It uses import famous brands of electric and pneumatic fittings, so the operation is stable, quality is reliable and life is long. 3. The design of the mold is advanced and special, heat the thermoplastic plastic flake board and put on the mold, pull the piston, give the pressure to the air, keep the flake board close to the inside of the mold to form, then, cut and automatically blow the product. The structure of the whole machine is compact, one mold has all the functions, like pressure giving, forming, cutting, cooling, and finished product blowing, so the process is short, quality of the finished product is high and matches with national sanitary standard.Main Technical Parameter：Model?FJL-660SB-A?Approximate Forming Area:650 x 220 mm?Stroke / min approx. during production?15-30?Approx. Sheet width required for feeding.?500 – 660 mm in rolls.?Mode of cutting arrangement.?In mould automatic.?Sheet thickness Range.?0.20 – 2.0 mm?Material?PP,PS,PET,PVC?Draw depth,i.e. cup length.?130 mm?Oil Pump Motor Power?7.5KWMax. Sheet roll diameter.?800 mm?Heating arrangement?Top + bottom heating with IR Ceramic Heater(88pieces, 650W)?Temperature Controller & Thermocouple.?PID K-Type?Type of Mould?Multi cavity 1 - 3row.?Installed Power?67KW?Approximate Dimension?L3150×W1500×H2300（mm）?Approximate Weight?4100Kg?

  Main Technical Parameter:Material Used: PP、HIPS、PE、PS、PET、PVC Sheet RollSheet Width: 300-660mmSheet Thickness：0.2-2mmForming Speed：15~30moulds/minuteForming Depth：≤125（mm）Max. Sheet Roll Dia.：700mmMax. Forming Area：650×220mmMain Motor Power：7.5KWOverall Power：≤66KWWorking Air Pressure：0.6~0.8MPa (1.6m³/min)Overall Dimension：3.15×1.5×2.3（m）Weight：Round 4100KgPower Supply: 380V/50HZ, Tri-phase, Four-wire