Plastic Cup Making Machine

  Main Features: Full complete production line of plastic cups Full automatic: Adopts servo motor and PLC Features: This is full-automatic plastic cup making machine which adopts servo-motor to feed and draw sheet. It controls by PLC and touch screen. 1)It is used to produces such plastic products as disposable plastic cups, plastic bowls, ice cream cups, cold drinking cups, yoghurt cups, instant-food boxes and bowls, plastic dishes, plastic trays, plastic covers, plastic lids, vessels for fast food and pharmaceutical linings. 2) Its forming sheets as PP, PVC, PS, and PET and other sheet. 3) It adopts PLC and touch screen control equipment operation. 4) Mould adopts two cell guides position fixing. 5) Mould movement adopts hydraulic pressure drive. 6) Mechanism movement adds automatically oil to lubricate at certain time. 7) Temperature controller module controls each temperature area. 8) It can finish production at one time through sheet feeding, heating, stretching, forming and in-mould cutting. 9) It can produce different products by different moulds. 10) Stable operation and reliable performance, low noise, high quality.

  Major Construction Features:FJL-660SB Series Automatic Hydraulic Cup Making Machine is new equipment, which has been developed and produced with many years of machine producing experiences of our company, it uses stable hydraulic system and pneumatic technology to control together, its operation is stable, noise is small, mold locking ability is strong and quality is high. It mainly consists of formed machine, material rack, material receiving machine and screen controlled by electricity.1. The machine is completely automatic, productive speed is fast. Different products can be produced with different molds. 2. It uses import famous brands of electric and pneumatic fittings, so the operation is stable, quality is reliable and life is long. 3. The design of the mold is advanced and special, heat the thermoplastic plastic flake board and put on the mold, pull the piston, give the pressure to the air, keep the flake board close to the inside of the mold to form, then, cut and automatically blow the product. The structure of the whole machine is compact, one mold has all the functions, like pressure giving, forming, cutting, cooling, and finished product blowing, so the process is short, quality of the finished product is high and matches with national sanitary standard. Main Technical Parameter:Material Used: PP、HIPS、PE、PS、PET、PVC Sheet RollSheet Width: 300-660mmSheet Thickness：0.2-2mmForming Speed：15~30moulds/minuteForming Depth：≤125（mm）Max. Sheet Roll Dia.：700mmMax. Forming Area：650×320mmMain Motor Power：15KWOverall Power：≤76KWWorking Air Pressure：0.6~0.8MPa (1.6m3/min)Overall Dimension：3.4×1.6×2.3（m）Weight：Round 4300KgPower Supply: 380V/50HZ, Tri-phase, Four-wire

  Main Technical Parameter:Material Used: PP、HIPS、PE、PS、PET、PVC Sheet RollSheet Width: 300-660mmSheet Thickness：0.2-2mmForming Speed：15~30moulds/minuteForming Depth：≤125（mm）Max. Sheet Roll Dia.：700mmMax. Forming Area：650×220mmMain Motor Power：7.5KWOverall Power：≤66KWWorking Air Pressure：0.6~0.8MPa (1.6m³/min)Overall Dimension：3.15×1.5×2.3（m）Weight：Round 4100KgPower Supply: 380V/50HZ, Tri-phase, Four-wire

  Usage：FJL-660SB-B Fully-Automatic Plastic Thermoforming Machine is used to produce disposable water drinking cups, ice-cream cups, disposable cup/bowl for yoghurt, lids, dishes, plates and etc.Major Construction Features:FJL-660SB-B Automatic Hydraulic Cup Making Machine is new equipment, which has been developed and produced with many years of machine producing experiences of our company, it uses stable hydraulic system and pneumatic technology to control together, its operation is stable, noise is small, mold locking ability is strong and quality is high. It mainly consists of formed machine, material rack, material receiving machine and screen controlled by electricity.1. The machine is completely automatic, productive speed is fast. Different products can be produced with different molds. 2. It uses import famous brands of electric and pneumatic fittings, so the operation is stable, quality is reliable and life is long. 3. The design of the mold is advanced and special, heat the thermoplastic plastic flake board and put on the mold, pull the piston, give the pressure to the air, keep the flake board close to the inside of the mold to form, then, cut and automatically blow the product. The structure of the whole machine is compact, one mold has all the functions, like pressure giving, forming, cutting, cooling, and finished product blowing, so the process is short, quality of the finished product is high and matches with national sanitary standard.Main Technical Parameter：Model:FJL-660SB-B?Approximate Forming Area?650 x 220 mm?Stroke / min approx. during production:15-30?Approx. Sheet width required for feeding.?500 – 660 mm in rolls.?Mode of cutting arrangement.?In mould automatic.?Sheet thickness Range.?0.20 – 2.0 mm?Material?PP,PS,PET,PVC?Draw depth,i.e. cup length.?130 mm?Oil Pump Motor Power?7.5KW?Max. Sheet roll diameter.?800 mm?Heating arrangement:Top + bottom heating with IR Ceramic Heater(104pieces, 650W)?Temperature Controller & Thermocouple.?PID K-Type?Type of Mould?Multi cavity 1 - 3row.Installed Power:77KW?Approximate Dimension:?L3400×W1500×H2300（mm）?Approximate Weight:4200Kg?