Carsoft Compatible Interface

  Adapter for connecting to a vehicle which uses the 14 Pin Sprinter diagnostic connector.

  MCU controlled Interface for Mercedes Benz Carsoft 7.4 which is compatible with the original interface. MB Carsoft 7.4 Interface Multiplexed • OBD2 connection cable (all K-Lines wired) • MB 38 pin connection cable (all K-Lines wired) • MB Sprinter connection cable (all K-Lines wired) • MB 3 pin banana cable • RS232 extension cableInterface contains Multiplexer to connect to all diagnosticable Modules fully automatically. • Status Led's for Power, MCU and K-Line status • Aluminium casing • DB37 connection to vehicle • Includes ALL cables including even Sprinter cable • All cables with a length of 1,5 metres

  Descriptions:MCU controlled Interface for Carsoft 6.5 which is compatible with the original interface. Fully digital line switchings and MCU controlled service reset timing. Main FunctionsDigital total test: It gives you a complete idea of the overall condition of the car Digital single test: It gives you detailed information about the appropriate control unit. Stored errors will be shown in a written report. This report has a short info-text which help you to eliminate the error. Special functions for some models: Including service interval reset, component activation, live data, LCM reading, sync. EWS and ECU, adaptation values, and coding.  

  OP-COM is a PC based diagnostic program. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples. The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters. The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS. Compared to the TECH2, which is the dealers tool (with a 32 MB card+CANdi interface), the price of OP-COM is quite affordable. OP-COM is under continous development, new version will be availabe approximately every 3-4 month. OP-COM is currently available at the following languages:EnglishGerman Software version 20080805 English, 20080827 Germany.Notice:It can only be used with the attached software, any updated software would not work.

  Description:?? Determination of chassis, model, engine, gearbox and complete set?? Searching of all units and reading:??? - identification data??? - odometer value??? - VIN and ADFG??? - programming info (UIF)??? - errors (DTC)?? Reading and saving in files:??? - program memory??? - EEPROM??? - coding data??? - amount of DTCs and DTCs shadow-memory??? - live data??? - programming info (User Info Fields)?? Copying ZCS (IKE - EWS) and FA (IKE - LCM) coding?? ... and other functions in various units ?? "Unlocked" functions to show possibilities of full version:?? DTCs description in DME MS43.0, EWS3, SRS MRS4?? Clearing DTCs in same units?? EWS-DME synchronization code in DME MS43.0?? Live data in DME MS43.0, EWS3, SRS MRS2 and MRS4?? Status of all keys in EWS3?? EWS3 coding data interpretation?? Equipment correction in SRS MRS4 Some screenshots of BMW Scanner V1.4.0

  BMW Scanner E6x (version 2.0.1) for? chassis? E60/E61(5')? E63/E64(6')? E65/E66(7')? E87(1')? E90/E91(3') BMW Scanner E6x V2.0.1 is intended to work with BMW 1, 3, 5, 6 and 7 series in "new" chassis.? 1.Connecting with all electronic control modules in the vehicle. 2.For all electronic control units reading identification data, sw/hw versions, user information fields. 3.For all electronic control units read and clear error (DTCs) memories - standart, shadow, history memory. 4.Possibility to read/program memory of electronic control units (including CAS modules). 5.odometer correction CAS by OBDII

  THE SUPER BMW SCANNER TOOl BMW DASH E6x V2.0 is intended to work with BMW 1, 3, 5, 6 and 7 series in "new" chassis. for chassis E60/E61(5') E63/E64(6') E65/E66(7') E87(1') E90/E91(3') Features:Connecting with all electronic control modules in the vehicle. For all electronic control units reading identification data, sw/hw versions, user information fields. For all electronic control units read and clear error (DTCs) memories - standart, shadow, history memory. Possibility to read/program memory of electronic control units (including CAS modules).Synchronization DME/DDE and CAS.