VAG Diagnostic Tools

  This product can be used to odometer correction, read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic for? VW Passat, VW, VW Bora, VW Polo, VW Golf, Audi A6, Audi A8, Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia vehicles. CAN odometer correction CAN read Security Access CodeK read Security Access Code,odometer correction Engine security code, kilometres read Suport vehicles :BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8. Key programmer TV ActivationVAG MMI TV Activation - A6,A8,Q7 Airbag reset tool 1C0 909 605 C, 8L0 959 655 A, 1J0 909 609, 6Q0 909 605 C,6Q0 909 605 A, 6Q0909 605 B, 3B0 959 655 B,1C0 909 605 F, 1C0 909 605 H, 1J0 909 607, 1J0 909603, 4B0 959 655 C, 4B0 959 655 J, 4D0 959 655 C,8L0 959 655 F8A0 959 655 C,8A0 959 655 K, 8A0 959 655 K, 4D0 959 655 H, 8D0 959 655 C, 8D0 959 655 L DiagnosticSupport all of VW,Audi,Skada vehicles that k cables and CAN BusMultifunctional adaptor Act as the following donglesKWP2000VAG K+CAN 1.4EOBD 1250EDC16 1244

  Features Working with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including KKL and CAN-BUS. Functions Full support for control modules using the new "Service 22" identification methods. Support for control modules using the new UDS/ODX/ASAM protocol.   The following functions are supported:Control Module ID (including Advanced ID), Coding, Security Access, and Fault Codes. New Session Log capabilities. Support for Generic OBD-II Mode 10. Support for vehicles with dual ECUs, or example the RS4 and W12 engines.  Both ECUs are accessible simultaneously via address 31 for Basic Settings such as TBA. Revised Adaptation screen to support the much longer Long Adaptations now appearing in some control modules. Revised Advanced ID screen for increased flexibility handling the various data items appearing in the latest control modules. New internal Gateway Coding Assistant (required for Audi B8 platform cars). Much improved documentation (Label Files) for many older carsModule Version - identify the control module part number and coding version DTC Memory - read and clear manufacturer diagnostic trouble codes Actual Values - access live data Activation - selected components can be activated Code Module - code new control modules (most models through 2002) Adaptation - read/reset Service Light parameters, view/change block learn values Basic Settings - view and change control module default settings (Excluding 1.8T 01 and newer) Individual Values - read individual measuring values Readiness Code - Check status of applicable emissions related systems Remote Control Programming - program Radio Frequency keys Key Matching - match keys to Immobilizer control module (5 digit) Workable Models All VW, AUDI, SEAT, and SKODA vehicles, includes those with CAN-BUS system. What can this interface be used for? This interface (adapter) is used as an interface and a USB cable to connect a VW/AUDI vehicle to a PC with USB port for on-board diagnostics (OBD). Specifications OBDII Plug: J1962 16-Pin Male (to Car) Connection Port: USB port Length: 1.8 meters Weight: About 150g Color: BlackPowered from car battery over OBD2 connector

  OBDII CAN-USB V704.1 FullCompatible with the newest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7,etc. Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt. Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6,A8,etc.1.USB connector plugs into most modern laptops! 2.Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8. 3.Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. 4.Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt. 5.Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches! 6.Fully backwards compatible with older cars using a single K-line or K plus L. 7.Bi-Color (red/green) status/activity LED The product description:OBDII Can USB with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7. Protocol timing indistinguishable from a real VAG/VAS tool.The possibility that software is complete is on the xxxxx renewal, function all of, support the car type to 2007. Diagnostics Type including:All Golf-5 platform cars (A5 platform) including:• 2003+ VW Touran (1T chassis) • 2004+ VW Golf (1K chassis) • 2004+ VW Caddy (2K chassis) • 2004+ Audi A3 (8P chassis) • 2004+ Seat Altea (5P chassis) • 2004+ Skoda Octavia (1Z chassis) • 2005+ Seat Toledo (5P chassis) • 2005+ Golf Plus (5M chassis) • 2005+ Seat Leon (1P chassis) • 2005.5+ Jetta (1K chassis) • 2006+ Eos (1F chassis) • 2003+ Audi A8 and A8L (D3 platform, 4E chassis) • 2005+ Audi A6 (C6 platform, 4F chassis) • 2005+ Audi A4 ("B7" platform) (some control modules) • 2005.5+ VW Passat (B6 Platform, 3C chassis) • 2006+ Audi Q7 (4L chassis) • 2007+ Audi R8 (42 chassis)• 2007+ Audi TT (8J chassis) • 2007+ VW Touareg (7L6 chassis) ("facelift", built after Nov. 30 2006)