Offer List

  The Purifiers are specially designed to treat water、emulsification and pollution particles in the industrial oil, such as lubricating oil、mechanical oil、hydraulic oil、compressor oil、cooling mechanical-oil etc., which are use in production、transportation and application. The features of these oils are high viscosity、more water、high requirement of cleanness. The Yuneng purifiers are specially designed to remove various kinds of pollutants in the oil via the vacuum separation and impurity-filtration system. So it is an certain trend for industrial and mining enterprise to choose this series and they have remarkable economic benefits in saving energy、lowering consumption and maintaining equipment etc., Features of Product 1.      The new product of our factory is the oil-purifier special for high viscosity oil and it suitable to treat oil with high viscosity.   2.      As the new patent technology Vacuum-segregating is adopt the separated equipment of inflator (Patent No. ZL200420060968.5) employs particular spinning disk and stainless steel machine with dehydration and air pump and enlarges the area of segregating and coming to three-dimensional evaporation so that obtain the enough time to boil away. In this way purifier could achieve the best effect.   3.      Using new type of heating equipment (Patent No. ZL02276238.8), it can reduce heating burthen and extend oil life.   4.      The water cycled vacuum-pump from abroad lubricates by coolant (or water) and that it never afraid that air enter in the vacuum-pump. It will solve your problem that the spinning vacuum-pump which using fluid as medium need always exchange oil.   5.      Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil. Spurting oil phenomena is never appeared. (Spurting prevention Patent No. ZL200420060973.6)   6.      With advantages of no leakage、low noise and long using life, this series of products adopt special input-oil pump which be airproofed by our factory.   7.      In order to meet customer’s needs of choosing right filter, we have scientific design and exact filter assemblies which could exchange by ones abroad. Both cost and oil disposal effect are good.

  ZJC-M Series Coal Grinding Mill-only Oil-Purifier   1. This series designed specially for high voltage oil and oil used in diluted oil station of power plant. The Purifier have obtained country patent (patent no. is ZL200420061086.0) and suitable for high viscosity oil treatment. 2. As the new patent technology Vacuum-segregating is adopt the separated equipment of inflator (Patent No. ZL200420060968.5) employs particular spinning disk and stainless steel machine with dehydration and air pump and enlarges the area of segregating and coming to three-dimensional evaporation so that obtain the enough time to boil away. In this way purifier could achieve the best effect. 3. Using new type of heating equipment (Patent No. ZL02276238.8), it can reduce heating burthen and extend oil life. 4. The water cycled vacuum-pump from abroad lubricates by coolant (or water) and that it never afraid that air enter in the vacuum-pump. It will solve your problem that the spinning vacuum-pump which using fluid as medium need always exchange oil. 5. Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil. Spurting oil phenomena is never appeared. (spurting prevention Patent No. ZL200420060973.6) 6. With advantages of no leakage、low noise and long using life, this series of products adopt special high viscosity oil pump which be airproofed by our factory. 7. In order to meet customer’s needs of choosing right filter, we have scientific design and exact filter assemblies which could exchange by ones abroad. Both cost and oil disposal effect are good. Simultaneity, when we choose the abroad filter assemblies, the plant could keep oil expedite by equipped high voltage protecting system. 8. The plant is all made of stainless steel without adding antirust so that working uninterruptedly.

  KJY Series Special Oil-Purifier for Fire-Resistant Oil   With the material that is compatible with the fire-resistant oil and dehydration in vacuum, new particle-filter for removing pollutant, the technique for absorption of the acid constituents in the treated oil, series of KYJ oil-purifier for fire-resistant oil are especially designed for the use of the fire-resistant oil. They have the functions of purifying and filtering the qualified fire-resistant oil in advance, re-purifying and re-filtering the slight pollutant fire-resistant oil, recyclable filtering the mid-degree pollutant fire-resistant oil. The series are the indispensable filter equipment when fire-resistant oil is having used. They can be applied to operate on-line, filter movable and add new oil, and extend the lifetime of fire-resistant oil, maintain security of the machine and save power.   Features of Product 1.      The plant is all made of stainless steel with features of handiness、nice appearance and easy operation. 2.      The plant adopts the elements of vacuum adsorption which could eliminate the acid of water in the oil. 3.      Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude. Spurting oil phenomena is never appeared. 4.      The exacting filter assembly employee the specialized ones which have a good effect for impurity controlling (could reach the NAS 5-6 grade). It will satisfy client’s using requirement.  

  Utilized the domestic and foreign technique and innovatively designed, the filter has a good ratio of price-performance. With the advantages of high working vacuum, high filtration speed, oil quality protection, the filter advanced the oil treatment technique and equipment performance and once can raise the puncture voltage up to over 35V. The series products can be installed by sealed regular or movable with a trailer, so it is suitable to treat oil, fill oil in vacuum chamber and circulating dry hot-oil when large transformer is being installed and overhauled. Moreover, we can also provide customers with three-stage high-vacuum oil-filter so as to get higher vacuum and to meet your higher requirement for oil-treatment.   Features of product 1.                This series have one pot with two-stage vacuum-segregating space, it come into being different pressure so as to keep oil line balance between two stages.   2.                The pump of this product is adopted vacuum-pump imported from Europe, which have preceding level in the world, and with high air pump speed so as to get high working vacuity.   3.                As the new technology, vacuum-segregating (Patent No. ZL200420061085.6) employs particular spinning disk and stainless steel machine with dehydration and air pump so that enlarge the area of segregating and coming to three-dimensional evaporation.   4.                Using new type of heating equipment (Patent No. ZL02276238.8), it can reduce heating burthen and extend oil life.   5.                Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil, mount the equipment to prevent superhigh and superlow oil level. Spurting oil phenomena is never appeared. (Spurting prevention Patent No. ZL200420060973.6)   6.                As the client’s requirement, they could choose equipment which their components were all or partly imported from overseas. Include touching screen and flow gauge is can be selected according to customers. This series could meet different kinds of customer’s need.   7.                It equips filter assemblies imported from U.S.A. and it has large filtering area, strongly absorbent-dirt capability, high filtering precision.   8.                Whether clients choose the oil pump from domestic or abroad, they all must be airproofed by our factory, moreover running without noise and leakage. extended oil life.  

  After many years of study, we design YUNENG DYJC on-line purification plant which is mainly used in the field of the turbine and the lubricant set. We can satisfy our customers because of kinds of purification way. There is particular patent technique of double-system in vacuum. Their characteristics are: 1. dehydration in vacuum which can reduce water content to ＜50ppm in oil. 2. Particular fluid control system (vacuum pump will not spew oil in the long time function). 3. Credible double system design (one spare, one apply). 4. auto-control or manual-control in the field and remote-control junction port has been left to upgrade the system. 5. de-acid and de-color by the use of the collection-dehydration port. The system runs credibility and has high stability. You can auto-control or manual-control the equipment on the field or remote.   Features of Product 1.      The on-line set for lubrication designed by our company have obtained patent of country (patent no. ZL200420061085.6). The system include two grade vacuum pump and two oil pump, one is in use and the other is spare, so that inspect easily. 2.      The oil treatment effect of on-line purifying set could less than 50ppm. 3.      The plant leaves DCS long-range control so that customers choose various ways to control such as manual, automatic and long-range control. 4.      The plant also has features of ZJC-T series oil-purifier for turbine oil and JT collecting-dehydration oil purifying equipment.  

  Waste Engine Oil Purifier Series Through many years hard effort, the Company developed with success the Waste engine oil purification and discolourization purifier, which is a breakthrough in oil depolarization - a worldwide difficulty. This purifier can remove the tiny impurity dispersed in oil such as carbon particles and deep oxides, as well as bad substance such as colloid and bitumen. Thus, the clarity of oil is recovered, engine oil quality improved, performance of engine restored, abrasion reduced, these would ensure correct operation of lubricant system of a engine and extend the life of engine oil and engine as well. This kind of purifier is applicable to purification of various engine oil used transport facilities such as ship and automobile.

  Series of JT automatic Collecting-Dehydration Oil-Purifying equipment is designed to dehydrate the oil by use of filer assemblies and dehydration-filtering elements, which are separately made of hydrophilic and hydrophobic synthetic material. The plant can collect the free and emulsification water to become large drips to subside and drain them expediently. The plant also can demulsify、dehydrate and filter exactly. So they could filter water and impurities in turbine oil or lubrication on-line, especially fit to deal with leaked equipment. Features of Product 1.      The whole equipment designed individually with nice appearance、low power and low cost for operation.   2.      The plant is all made of stainless steel without adding antirust so that working uninterruptedly.   3.      The oil-water interfacial apparatus and automatic drained valve could offer exactly detached water level and drain water automatic when it accumulated condign capacity.   4.      Electric system control with PLC (touch screen) which could show working condition and operation of all parts clearly. It also can monitor equipments、automatic control and protect stopping machine. It could use of the equipment operation online without human.   5.      Adopting the special oil pump made in Germany that have good airproof、low noise and long life time.   6.      Multilayer filtration including coarse filter、protecting filter、nice filer are all imported from Europe and U.S.A. The effect of control impurities is excellent.  

  When various machine aggregates of steam turbine、hydraulic turbine are in operation, and their turbine oil which used to cool、 lubricate and regulate the speed is easily to be contaminated and form more moisture、impurities、emulsifying etc, which badly damage the security and the lifetime of equipment. And traditional treating way can not solve problems efficiently but cause waste and environmental pollution. After being studied for years, we developed the technique of subsidence of the oblique plate, rotary separation flowing in vacuum and depth filtration in grade. The 5th generation special vacuum oil purifier in Yuneng can fast damage emulsifying, remove water、 air and impurities thoroughly, and also make the turbine oil clear, improve maintenance level of machine aggregates. Features of Product 1.       As the new patent technology Vacuum-segregating is adopt the separated equipment of inflator (Patent No. ZL200420060968.5) employs particular spinning disk and stainless steel machine with dehydration and air pump and enlarges the area of segregating and coming to three-dimensional evaporation so that obtain the enough time to boil away. In this way purifier could achieve the best effect.   2.      Using new type of heating equipment (Patent No. ZL02276238.8), it can reduce heating burthen and extend oil life.   3.      The water cycled vacuum-pump from abroad lubricates by coolant (or water) and that it never afraid that air enter in the vacuum-pump. It will solve your problem that the spinning vacuum-pump which using fluid as medium need always exchange oil.   4.      Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil. Spurting oil phenomena is never appeared. (Spurting prevention Patent No. ZL200420060973.6)   5.      With advantages of no leakage、low noise and long using life, this series of products adopt special input-oil pump which be airproofed by our factory.   6.      In order to meet customer’s needs of choosing right filter, we have scientific design and exact filter assemblies which could exchange by ones abroad. Both cost and oil disposal effect are good.  

  BJ Series Oil-Regenerating Purifier   With the in-setting special absorbent, the purifier applies particular oil-treatment technique to purify and regenerate insulating oil, turbine oil and lubricating oil. And also could remove oil sludge, glue, acid constitutes and precipitate etc. moreover not damage oil=quality. The series often are applied together with the series of ZJB, ZJC.   Technical Para. Type Unit BJ-10 BJ-20 BJ-30 Appearance dimension cm 80x60x145 90x70x160 95x80x180 Absorbent capacity kg 50 100 150 Diameter Of inlet-outlet hose mm 25/16 32/25 32/25 Total electric power kw 0.55 0.55 0.75 Working power   50HZ 380V  3-Phase 4-Wire Working pressure Mpa ≤0.35

  YL series Portable Precision-Filtration Oil-Purifier   Adopting the way of multi-stage filtration, the series are simple in operation and convenient in maintenance, which are suitable to remove the impurities out of the oil, such as insulating oil, turbo-oil, machine oil and hydraulic oil etc. They can be fitted with different types of filter-assemblies. With the advantages that low cost and high filtering accuracy. They are the latest substitution products of the series of plate-frame pressure oil-filter.   Technical Para. Type Unit YL-50 YL-80 YL-100 YL-150 YL-200 Flow capacity L/min 50 80 100 150 200 Motor Power KW 1.1 1.5 2.2 3 4.4 Diameter of inlet-outlet hose mm 32/25 38/32 44/38 48/44 64/48 Weight Kg 100 120 150 200 260 Working pressure Mpa ≤0.5Mpa Working electric power 50Hz380V 3-Phase 4-Wire Filtering accuracy µm ≤5 Delivery lift m ≥15

  Vacuum air pump set is mainly used to draw out air in the container and make the container to attain high vacuity; simultaneity can dry equipment in vacuum. The vacuum air pump is provided with characteristics to startup fleetly, draw out greatly etc. And can be used I the fields of smelting in vacuum, welding, pharmacy and electrical vacuum equipment, especially suited to draw out the transformer.   Features of Product 1.      Simple configuration and convenient in operation. 2.      The fore pump adopts the original vacuum pump imported from Europe, and customer would choose the imported Roots pump or homemade ones according to their purchase capacity. The pumps have high pump speed so that attain high working vacuity. 3.      Equip in-line filter could keep large impurities out of equipment and prevent damaging the vacuum pump. 4.      The standard model of plants is closed type so that using outside easily and have nice appearance.