vag disagnostic tools

  Supported Models:This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by: - Volkswagen - Audi - Skoda - Seat Reference Data:1.This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus. 2. Terminal K = Bus of communication 3. Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit) 4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW 5. This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only. 6. Supported also ISO9141 protocol 7.The Cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.

   OBDII CAN-USB V704.1 FullCompatible with the newest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7,etc. Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt. Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6,A8,etc.1.USB connector plugs into most modern laptops! 2.Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8. 3.Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. 4.Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt. 5.Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches! 6.Fully backwards compatible with older cars using a single K-line or K plus L. 7.Bi-Color (red/green) status/activity LED The product description:OBDII Can USB with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8,Q7. Protocol timing indistinguishable from a real VAG/VAS tool.The possibility that software is complete is on the xxxxx renewal, function all of, support the car type to 2007. Diagnostics Type including:All Golf-5 platform cars (A5 platform) including:? 2003+ VW Touran (1T chassis) ? 2004+ VW Golf (1K chassis) ? 2004+ VW Caddy (2K chassis) ? 2004+ Audi A3 (8P chassis) ? 2004+ Seat Altea (5P chassis) ? 2004+ Skoda Octavia (1Z chassis) ? 2005+ Seat Toledo (5P chassis) ? 2005+ Golf Plus (5M chassis) ? 2005+ Seat Leon (1P chassis) ? 2005.5+ Jetta (1K chassis) ? 2006+ Eos (1F chassis) ? 2003+ Audi A8 and A8L (D3 platform, 4E chassis) ? 2005+ Audi A6 (C6 platform, 4F chassis) ? 2005+ Audi A4 ("B7" platform) (some control modules) ? 2005.5+ VW Passat (B6 Platform, 3C chassis) ? 2006+ Audi Q7 (4L chassis) ? 2007+ Audi R8 (42 chassis)? 2007+ Audi TT (8J chassis) ? 2007+ VW Touareg (7L6 chassis) ("facelift", built after Nov. 30 2006)

   USB connector plugs into most modern laptops! (USB 1.1 or 2.0) Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8. Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt. Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches! Fully backwards compatible with older cars using a single K-line or K plus L. Q: What is CAN and why is it important? A: CAN stands for Controller Area Network. CAN is a new means of communicating with the can for diagnostics used by the latest generations of VW, Audi, SEAT, and Skoda vehicles. Unlike the older ISO9141 system which a used a single K-line for diagnostic communications, the new CAN-Bus system uses a twisted pair of wires with differential signaling. CAN is considerably faster than ISO-9141 (500 kpbs vs. 10.4 kbps). Both new hardware and new software are required in order to communicate with cars using CAN for diagnostics. Q: What Cars Use CAN for Diagnostics? (Click on the links of info on each vehicle)All Golf-5 platform cars (A5 platform) including: 2004+ VW Golf (1K chassis)2003+ VW Touran (1T chassis)2004+ VW Caddy (2K chassis)2004+ Audi A3 (8P chassis)2004+ Seat Altea (5P chassis)2004+ Skoda Octavia (1Z chassis)2005+ Seat Toledo (5P chassis)2003+ Audi A8 and A8L (D3 platform, 4E chassis)2005+ Audi A6 (C6 platform, 4F chassis)2005+ Audi A4 ("B7" platform) (some control modules) Q: Does VAG-COM work with cars that require direct CAN access for diagnostics?A: Yes! We have integrated CAN compatibility since the Release 404.0 version of VAG-COM, but as CAN uses different hardware, new interfaces are required in order to communicate with a CAN-based car. These are now available as well. The new HEX-COM+CAN and HEX-USB+CAN interfaces are fully compatible with the new latest cars which require a direct CAN connection. Q: Do the CAN-Bus Interfaces also work with older vehicles that use the k-line?A: Yes! The HEX-COM+CAN and HEX-USB+CAN are fully backwards compatible with older vehicles that use either single or dual K-lines as well, so they work with all VW/Audi/SEAT/Skoda from 1996-2005.

   VAG-COM for 607.3 is Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8. Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt. Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches! Fully backwards compatible with older cars using a single K-line or K plus L. Features: 1. USB connector plugs into most modern laptops! 2. Compatible with the latest cars which require a direct CAN connection for diagnostics including all Golf-5 platform cars and latest Audi A3, A6 and A8. 3. Protocol timing indistinguishable from a real VAG/VAS tool. Works reliably even with "difficult" control modules such as the 1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with Hella ECU. 4. Built-In VAG-Saver functionality -- instantly alerts the user if either the K/K1 line or the L/K2 line is shorted to Ground or Vbatt. 5. Full support for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual switches! 6. Fully backwards compatible with older cars

   Car Support List:This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by: - Volkswagen - Audi - Skoda - Seat Reference Data:1.This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus. 2. Terminal K = Bus of communication 3. Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit) 4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW 5. This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only. 6. Supported also ISO9141 protocol 7.The Cables may work with some versions of the Carsoft, but carsoft used a lot of different interfaces during the different versions and also had some custom interfaces.

   1.support Comprehensive model, support the great majority of VW,Audi,Skoda model.     2.support Comprehensive Anti-theft System,such as IMMO1 IMMO2 IMMO3.WFS ect.     3.support K-Lines.Can BUS cables     4.used 32-bit processor, the computing power and the compatibility more stronger     5.big flash volume,support the cpu extend,can be last upgrade      6.high screen Resolution,richer information     7.suport system checked, can be checked the error online      8.Upgrade easy and fast,support online Upgrade     9.Man-machine interface more friendly, more convenient operation, easy to learn and use support system since the detection, on-line check system failures     10.Localization of design and support multiple languages, such as Chinese, English, Spanish language, Italian, etc. and can be upgraded to expand online     11.Input convenience, use of multi-function digital keyboard, supports digital Shortcuts     12.nice looks and generous, using ergonomic design, feel good, easy to control     13.shell with durable materials, applicable to the complex working environment Function: This product can be used to odometer correction ,read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic for  VW Passat,VW ,VW Bora,VW Polo,VW Golf,Audi A6,Audi A8,Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia vehicles CAN odometer correction VW Golf5 VW Jetta (MY2006) VW Caddy VW Crossgolf VW Touaran VW EOS VW Individual VW Passat platform B6 (MY2006) Seat Toledo (CAN) Seat Leon (CAN) Seat Altea Seat Altea XL Skoda Octavia II Skoda Scout Audi A3 Audi A8 Audi A6 Audi Q7 Audi Allroad 2004+ CAN read Security Access CodeVW Golf5 VW Jetta (MY2006) VW Caddy VW Crossgolf VW Touaran VW EOS VW Individual VW Passat platform B6 (MY2006) Seat Toledo (CAN) Seat Leon (CAN) Seat Altea Seat Altea XL Skoda Octavia II Skoda Scout Audi A3 Audi A8 - R/W EEPROM Audi Q7 Audi Allroad Audi A6 K read Security Access Code,odometer correction, Audi A2 (K) Audi A3 VDO/M73 up to 2003 (K) Audi A4 VDO/M73 (K)  Audi A4 BOSCH (K) up to 2002 Audi A6 VDO (K) Audi Allroad (K) up to 2004 Audi A8 up to Jan 1999  Audi TT (K) Seat Alhambra (K) Seat Arosa (K) Seat Cordoba after 1999 (K) Seat Ibiza VDO after 1999 (K) (MY2007 covered) Seat Leon (K) Seat Toledo (K) Skoda Octavia (K) Skoda Superb (K) Skoda Roomster (K) (MY2007 covered) Skoda Fabia (K) (MY2007 covered) VW Bora (K) VW Beetle (K) VW Golf4 VDO/Motometer/BOSCH (K) VW Jetta (K) VW Passat (K) VW Polo VDO/Motometer (K) (MY2007 covered) VW Sharan (K) VW T4/T5 VDO (K) (MY2007 covered) Engine security code, kilometres readSuport vehicles £ºBOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.Key programmerAudi A2 Audi A3 VDO/M73 up to 2003 Audi A4 VDO/M73 up to 2000 Audi A4 after 2000 - petrol engines >= 1.8 Audi A6 VDO (K) Audi A6 (CAN) petrol engines Audi Allroad (K) up to 2004 Audi Allroad (CAN) petrol engines Audi A8 up to 1998

  Diagnostic via CAN and Special functions via K-line. Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0. Manual definition of running diagnostic session ¡¡?¬C not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0. Broadcast diagnostic request ¡¡?¬C disable normal communication, clear DTCs, Logistic (transport) mode,.... Functions are under CAN-TP2.0. Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0. Most of popular diagnostic requests ¡¡?¬C identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0. Special function - odometer correction in instrument clusters and EDC15x. Special function - read Security Access Code/Login WFS. Special function - read/program immobilizer data. Special function - read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K. Special function - VAG MMI TV Activation. Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche. Special function - Key learning buttons for easy usage (not needed security code). Can do component security authorization. Special function - Key learning Porsche CAYENNE (not needed security code) K+CAN. Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o.. Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories Special function - Crash data clear in airbag units List of vehicles covered from function odometer change via OBDII: Audi Q7 (CAN) Audi A2 (K) Audi A3 (CAN) up to 2007 !!! Audi A3 VDO/M73 up to 2003 (K) Audi A4 VDO/M73 (K) Audi A4 BOSCH - RB4 clusters (CRYPTO eeproms R/W by OBDII) Audi A6 VDO (K) Audi A6 (CAN) Audi Allroud (K) up to 2004 Audi A8 (K) VDO93xx Audi A8 (CAN) up to 2007 !!! Audi TT (K) Seat Alhambra (K) Seat Altea (CAN) Seat Arosa (K) Seat Cordoba after 1999 (K) Seat Ibiza VDO after 1999 (K) Seat Leon (K+CAN) Seat Toledo (K+CAN) Skoda Octavia (K) Skoda Octavia II (CAN) Skoda Superb (K) Skoda Roomster (K) Skoda Scout (CAN) Skoda Fabia (K) VW Bora (K) VW Beetle (K) VW Caddy (CAN) VW EOS (CAN) VW Golf4 VDO/Motometer/BOSCH RB VW Golf5 VDO (CAN) VW Golf5 VISETEON VW Crossgolf (CAN) VW Individual (CAN) VW Jetta (K+CAN) VW Passat B5/B6 (K+CAN) VW Polo VDO/Motometer (K) VW Sharan (K) VW T4/T5 VDO (K) VW Touaran VDO (CAN) List of vehicles covered from function security access code/login reading via OBDII: Audi A2 Audi A3 (CAN) up to 2007 !!! Audi A3 VDO/M73 up to 2003 (K) Audi A4 VDO (K) Audi A4 BOSCH (K) up to 2001 Audi A4 after 2000 - petrol engines >= 1.8 Audi A6 VDO (K) Audi A6 (CAN) petrol engines Audi Allroad (K) up to 2004 Audi Allroad (CAN) petrol engines Audi A8 up to 2001 Audi A8 from 2001 to 2002 2.5TDI Audi A8 (CAN) 2003+ petrol Audi TT (K) Audi Q7 petrol engines Seat Altea (CAN) Seat Cordoba after 1999 (K) Seat Ibiza (VDO) after 1999 (K) Seat Leon (K+CAN) Seat Toledo (K+CAN) Skoda Octavia Skoda Octavia II (CAN) Skoda Superb Skoda Roomster Skoda Scout (CAN) Skoda Fabia VW Bora VW Beetle VW Caddy (CAN) VW EOS (CAN) VW Golf4 VDO/Motometer/BOSCH RB VW Golf5 VDO (CAN) VW Crossgolf (CAN) VW Individual (CAN) VW Jetta (K+CAN) VW Passat B5 (K) B6(CAN) VW Polo5 VW Sharan after year 2000 VW T5 VW Phaeton petrol VW Touareg petrol VW Touaran VDO (CAN) PORSCHE Cayenne (CAN/K) Current version 2.5 covers VW/SEAT/SKODA (CAN) up to September 2006 while AUDI covered up to 2008

  Working with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including KKL and CAN-BUS.FunctionsFull support for control modules using the new "Service 22" identification methods. Support for control modules using the new UDS/ODX/ASAM protocol. The following functions are supported:Control Module ID (including Advanced ID), Coding, Security Access, and Fault Codes. New Session Log capabilities. Support for Generic OBD-II Mode 10. Support for vehicles with dual ECUs, or example the RS4 and W12 engines. Both ECUs are accessible simultaneously via address 31 for Basic Settings such as TBA. Revised Adaptation screen to support the much longer Long Adaptations now appearing in some control modules. Revised Advanced ID screen for increased flexibility handling the various data items appearing in the latest control modules. New internal Gateway Coding Assistant (required for Audi B8 platform cars). Much improved documentation (Label Files) for many older carsModule Version - identify the control module part number and coding version DTC Memory - read and clear manufacturer diagnostic trouble codes Actual Values - access live data Activation - selected components can be activated Code Module - code new control modules (most models through 2002) Adaptation - read/reset Service Light parameters, view/change block learn values Basic Settings - view and change control module default settings (Excluding 1.8T 01 and newer) Individual Values - read individual measuring values Readiness Code - Check status of applicable emissions related systems Remote Control Programming - program Radio Frequency keys Key Matching - match keys to Immobilizer control module (5 digit)Workable ModelsAll VW, AUDI, SEAT, and SKODA vehicles, includes those with CAN-BUS system.What can this interface be used for? This interface (adapter) is used as an interface and a USB cable to connect a VW/AUDI vehicle to a PC with USB port for on-board diagnostics (OBD). SpecificationsOBDII Plug: J1962 16-Pin Male (to Car) Connection Port: USB port Length: 1.8 meters Weight: About 150g Color: BlackPowered from car battery over OBD2 connector

   VAG-COM 812Windows-based Diagnostic Software for VW / Audi / Seat / Skoda  *VAG-COM is the first aftermarket VAG-Tool that:1.Is fully compatible with all VW, Audi, Seat and Skoda models through 2009, including models using a direct CAN connection for diagnostics*. 2.Has a database of more than 12000 fault-codes and measuring-block texts. 3.Can use the new 7-Digit PIN/SKC codes to match new keys in all immobilizer equipped VW/Audi/Seat/Skoda models.  4.Allows you to view,  log, and graph 3 groups of Measuring Blocks at once 5.Can access all control modules which require proprietary VAG modes running the KWP-2000 protocols (2001+ Teves Mk.60 ABS, numerous 2002+ modules), KWP6000 (CAN) and/or KWP7000 (UDS)*. 6.Can display critical timing information on TDI engines in graphic form

  Diagnostic via CAN and Special functions via K-line. Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0. Manual definition of running diagnostic session ¡¡??¬C not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0. Broadcast diagnostic request ¡¡??¬C disable normal communication, clear DTCs, Logistic (transport) mode,.... Functions are under CAN-TP2.0. Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0. Most of popular diagnostic requests ¡¡??¬C identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0. Special function - odometer correction in instrument clusters and EDC15x. Special function - read Security Access Code/Login WFS. Special function - read/program immobilizer data. Special function - read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K. Special function - VAG MMI TV Activation. Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche. Special function - Key learning buttons for easy usage (not needed security code). Can do component security authorization. Special function - Key learning Porsche CAYENNE (not needed security code) K+CAN. Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o.. Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories Special function - Crash data clear in airbag units List of vehicles covered from function odometer change via OBDII: Audi Q7 (CAN) Audi A2 (K) Audi A3 (CAN) up to 2007 !!! Audi A3 VDO/M73 up to 2003 (K) Audi A4 VDO/M73 (K) Audi A4 BOSCH - RB4 clusters (CRYPTO eeproms R/W by OBDII) Audi A6 VDO (K) Audi A6 (CAN) Audi Allroud (K) up to 2004 Audi A8 (K) VDO93xx Audi A8 (CAN) up to 2007 !!! Audi TT (K) Seat Alhambra (K) Seat Altea (CAN) Seat Arosa (K) Seat Cordoba after 1999 (K) Seat Ibiza VDO after 1999 (K) Seat Leon (K+CAN) Seat Toledo (K+CAN) Skoda Octavia (K) Skoda Octavia II (CAN) Skoda Superb (K) Skoda Roomster (K) Skoda Scout (CAN) Skoda Fabia (K) VW Bora (K) VW Beetle (K) VW Caddy (CAN) VW EOS (CAN) VW Golf4 VDO/Motometer/BOSCH RB VW Golf5 VDO (CAN) VW Golf5 VISETEON VW Crossgolf (CAN) VW Individual (CAN) VW Jetta (K+CAN) VW Passat B5/B6 (K+CAN) VW Polo VDO/Motometer (K) VW Sharan (K) VW T4/T5 VDO (K) VW Touaran VDO (CAN) List of vehicles covered from function security access code/login reading via OBDII: Audi A2 Audi A3 (CAN) up to 2007 !!! Audi A3 VDO/M73 up to 2003 (K) Audi A4 VDO (K) Audi A4 BOSCH (K) up to 2001 Audi A4 after 2000 - petrol engines >= 1.8 Audi A6 VDO (K) Audi A6 (CAN) petrol engines Audi Allroad (K) up to 2004 Audi Allroad (CAN) petrol engines Audi A8 up to 2001 Audi A8 from 2001 to 2002 2.5TDI Audi A8 (CAN) 2003+ petrol Audi TT (K) Audi Q7 petrol engines Seat Altea (CAN) Seat Cordoba after 1999 (K) Seat Ibiza (VDO) after 1999 (K) Seat Leon (K+CAN) Seat Toledo (K+CAN) Skoda Octavia Skoda Octavia II (CAN) Skoda Superb Skoda Roomster Skoda Scout (CAN) Skoda Fabia VW Bora VW Beetle VW Caddy (CAN) VW EOS (CAN) VW Golf4 VDO/Motometer/BOSCH RB VW Golf5 VDO (CAN) VW Crossgolf (CAN) VW Individual (CAN) VW Jetta (K+CAN) VW Passat B5 (K) B6(CAN) VW Polo5 VW Sharan after year 2000 VW T5 VW Phaeton petrol VW Touareg petrol VW Touaran VDO (CAN) PORSCHE Cayenne (CAN/K) Current version 3.0 covers VW/SEAT/SKODA (CAN) up to September 2006 while AUDI covered up to 2007