Offer List

  1. Plastic case for notebook/netbook; 2. All kinds of colours could be available as per customer's request; 3.We can customize all types of notebook/netbook case as per customers' samples.  

   Panel size(diagonal) 　 24 inch,wide screen   　 Pixel pitch 　 0.270mm Brightness（lumen） 　 500cd/㎡ 　 Contrast ratio 　 10000:1(DCR)/1000:1(type) 　 Color 　 16.777 M 　 Response time 　 4ms ~ 16ms 　 Viewing angle 　 H:160°；V：120° 　 Horizontal Scan Scope 　 30 k - 80 KHz 　 Vertical Scan Scope 　 55 - 75 Hz 　 Max. Resolution 　 1920 x 1200 　 Plug and play 　 DDC(TM) - 2B Monitor to PC data transmission 　 Input power 　 AC 100V ~ 240V, 50/60Hz 　  Power 　 General Operation 　  ≤ 40 W 　 　 Save power mode( Pause/Ready、Standby ) 　  ≤ 5 W 　 　 AC Power Close 　  ≤ 0 W Energy Starprogram 　 International Energy StarProgram, VESA Safety Certification  　 CCC、FCC、CE 　 Compatiable system 　 Windows Logo Compliance & Macintosh 　 Input signal 　 RGB Analog 　 Output signal 　 D-sub 15-pin or DVI-D（Optioal）

  Mould Name: Plastic Tray  Injection Mold/Mould Cavities: 1 cavity Treatment: Pretreat And Nitriding Mould Steel: Cavity, Core and slide: P20, 2738, 2136 available / moldbase: LKM available Standard: DEM available Design Software: UG, PRO-E, SOLIDWORKS, AUTOCAD Hot runner: According to your demand Life time: >300 Thousand Times Package: Plywood case, anti-rust paint Transport: By Sea or Air Payment: TT or L/C. First trial time: 30 days

   1) Clear plastic part is made of clear PC, ABS, PMMA,GPPS material is transparent; 2) Reasonable price; 3) Beautiful design; 4) Customers' logos are welcome; 5) Produced according to client requirement; 6) Customized designs are welcome.

  1. Screw nut inserts in 5 directions on the plastic water valve housing;2. 4 screw nut inserts on each direction;3. M6&M8 copper screw nut inserts;4. Material: PP reinforced 30 GF;5.Used for ship watering systems.

   1 Clients offer 3D drawings in format of stp, igs, prt or solidworks and sufficient information of their plastic parts; 2 We offer the quote of plastic injection molds and plastic injection molding (plastic parts) in 1 or 2 days; 3 Clients confirm our quotes; 4 Clients place the order, 5 We design and manufacture the plasitc injection molds in leadtime after confirming the drawings and detailed information with clients again; 6 Plastic injection mold trial samples sent to clients to get their confirm and to see if there is any modification before mass producton; 7 Arrange mass production at once and finish the production before the leadtime; 8 Delivery by sea or air on time.

  Key Specifications/Special Features:1.Injection mold cavities material: ASSAB 718H or Daido NAK80, imported;2. Hardness for the cavities: 48 to 58hrc, after heat-treatment; 3.Mold base: LKM;4.Plastic material: ABS, black;5.OEM production is welcomed.

  Injection Molded Plastic Parts for Lighting Industry, ODM Orders are Welcome Complete injection molded plastic products according to your requirements; Meeting or exceeding customer expectations, whether long or short production runs, for a variety of industries; Plastic materials are made from ABS, PP, POM, nylon, HDPE, PVC, HIPS, TPU, TPR and so on; OEM or ODM orders are welcome.

  1) Description:  plastic clear cover mould & product 2) Material: GPPS or according to customers' requests 3) Molds can also be manufactured according to customers' requests or samples 4) We offer high quality, competitive price and good service 5)Silk screen printing on the surface6) Welcome OEM products

  Product Description Material: Zinc Alloy(ZAMAK 3#)  Surface treatment: Shot blasting, sandblasting or spray painting or anodized, plating as per customers

  Product Description Material: Zinc Alloy(ZAMAK 3#) Surface treatment: Shot blasting, sandblasting or spray painting or anodized, plating as per customers

  Key Specifications/Special Features:   Injection mold cavities material: ASSAB 718H or Daido NAK80, imported   Hardness for the cavities: 48 to 58hrc, after heat-treatment   Mold base: LKM   Plastic material: ABS, PC, and acrylic, etc.   OEM production is welcomed

  Key Specifications/Special Features: Injection mold cavities material: ASSAB 718H or Daido NAK80, imported; Hardness for the cavities: 48 to 58hrc, after heat-treatment; Mold base: LKM; Plastic material: ABS, PC, and acrylic, etc.; OEM production is welcomed.

  Material: Zinc Alloy(ZAMAK 3#) Surface treatment: Shot blasting, sandblastingor spray paintingor anodized, plating as per customers

  In-house Mold Design, Mold Making, Mold Flow Analysis for ThermoplasticWe provide our customer with detailed tool design drawing; We can make mold from 3D data in Pro/Engineer, Unigraphics, STEP, VDA or IGES format; We can handle mold with weight up to 8, 000kg; We have more than 50 engineers/tool-makers/technicians in our tooling department; We make molds for both in-house production and export.

   High-precision Plastic Injection Mold Tooling Plastic injection mould tool-1 High-precision Plastic Injection Mold Tooling for Complicated Box with 4 Sliders Equipped with advanced CNC, EDM and wire-cutting machines Strict quality inspection Good communication with customers for product review and mold structure Customer's designs are welcome