Mold,Injection Mold,Injection Molding and more.

  1. Screw nut inserts in 5 directions on the plastic water valve housing;2. 4 screw nut inserts on each direction;3. M6&M8 copper screw nut inserts;4. Material: PP reinforced 30 GF;5.Used for ship watering systems.

  1. Plastic case for notebook/netbook; 2. All kinds of colours could be available as per customer's request; 3.We can customize all types of notebook/netbook case as per customers' samples.  

   Panel size(diagonal) 　 24 inch,wide screen   　 Pixel pitch 　 0.270mm Brightness（lumen） 　 500cd/㎡ 　 Contrast ratio 　 10000:1(DCR)/1000:1(type) 　 Color 　 16.777 M 　 Response time 　 4ms ~ 16ms 　 Viewing angle 　 H:160°；V：120° 　 Horizontal Scan Scope 　 30 k - 80 KHz 　 Vertical Scan Scope 　 55 - 75 Hz 　 Max. Resolution 　 1920 x 1200 　 Plug and play 　 DDC(TM) - 2B Monitor to PC data transmission 　 Input power 　 AC 100V ~ 240V, 50/60Hz 　  Power 　 General Operation 　  ≤ 40 W 　 　 Save power mode( Pause/Ready、Standby ) 　  ≤ 5 W 　 　 AC Power Close 　  ≤ 0 W Energy Starprogram 　 International Energy StarProgram, VESA Safety Certification  　 CCC、FCC、CE 　 Compatiable system 　 Windows Logo Compliance & Macintosh 　 Input signal 　 RGB Analog 　 Output signal 　 D-sub 15-pin or DVI-D（Optioal）

  1) Description:  plastic clear cover mould & product 2) Material: GPPS or according to customers' requests 3) Molds can also be manufactured according to customers' requests or samples 4) We offer high quality, competitive price and good service 5)Silk screen printing on the surface6) Welcome OEM products

  Mould Name: Plastic Tray  Injection Mold/Mould Cavities: 1 cavity Treatment: Pretreat And Nitriding Mould Steel: Cavity, Core and slide: P20, 2738, 2136 available / moldbase: LKM available Standard: DEM available Design Software: UG, PRO-E, SOLIDWORKS, AUTOCAD Hot runner: According to your demand Life time: >300 Thousand Times Package: Plywood case, anti-rust paint Transport: By Sea or Air Payment: TT or L/C. First trial time: 30 days

  Key Specifications/Special Features:1.Injection mold cavities material: ASSAB 718H or Daido NAK80, imported;2. Hardness for the cavities: 48 to 58hrc, after heat-treatment; 3.Mold base: LKM;4.Plastic material: ABS, black;5.OEM production is welcomed.

  Key Specifications/Special Features:1.Injection mold cavities material: ASSAB 718H or Daido NAK80, imported;2. Hardness for the cavities: 48 to 58hrc, after heat-treatment 3.Mold base: LKM4.Plastic material: ABS, black5.OEM production is welcomed

  Casing is made by hard material (ABS)Soft material (TPE), It has soft and elasticity feeling

  Over molding screw insert - Part Name: over mold screw nut - Cycle Time: 50Seconds - Min Mold Life: 500K shots - Leading Time: 35days

  Material: Zinc Alloy or Al alloy Surface treatment: Shot blasting, sandblastingor spray paintingor anodized, plating as per customers

  Product Description Material: Zinc Alloy(ZAMAK 3#) Surface treatment: Shot blasting, sandblasting or spray painting or anodized, plating as per customers

  1, Clients offer 3D drawings in format of stp, igs, prt or solidworks and sufficient information of their plastic parts 2, We offer the quote of plastic injection molds and plastic injection molding (plastic parts) in 1 or 2 days 3, Clients confirm our quotes 4, Clients place the order 5, We design and manufacture the plasitc injection molds in leadtime after confirming the drawings and detailed information with clients again 6, Plastic injection mold trial samples sent to clients to get their confirm and to see if there is any modification before mass producton 7, Arrange mass production at once and finish the production before the leadtime 8, Delivery by sea or air on time

   1, Clients offer 3D drawings in format of stp, igs, prt or solidworks and sufficient information of their plastic parts; 2, We offer the quote of plastic injection molds and plastic injection molding (plastic parts) in 1 or 2 days; 3, Clients confirm our quotes; 4, Clients place the order; 5, We design and manufacture the plasitc injection molds in leadtime after confirming the drawings and detailed information with clients again; 6, Plastic injection mold trial samples sent to clients to get their confirm and to see if there is any modification before mass producton; 7, Arrange mass production at once and finish the production before the leadtime; 8, Delivery by sea or air on time.

  Key Specifications/Special Features: Injection mold cavities material: ASSAB 718H or Daido NAK80, imported Hardness for the cavities:48 to 58hrc, after heat-treatment Mold base: LKM Plastic material: ABS, black OEM production is welcomed

  Injection Molded Plastic Parts for Lighting Industry, ODM Orders are Welcome Complete injection molded plastic products according to your requirements; Meeting or exceeding customer expectations, whether long or short production runs, for a variety of industries; Plastic materials are made from ABS, PP, POM, nylon, HDPE, PVC, HIPS, TPU, TPR and so on; OEM or ODM orders are welcome.

  Electrical product specifications: 1. Input voltage a: AC voltage: 100-240 V 50/60Hz B: DC voltage: 12 ~ 24 V 2. AC no-load power: ≤ 0.8 W 3. AC load input power: ≤ 6.5 W 4. DC no-load input current: ≤ 60 mA 5. DC load input current: ≤ 380 mA 6. Unladen output voltage: 4.2 V 7. Charge current: 600 mA 8. Short-circuit protection 9. Charging instructions: Red-charge, to a green light, green light without batteries 10. Temperature: 0 ~ 45 cent degree 11. Storage temperature: -25 ~ 60 cent degree Product performance characteristics: 1. Importation of a wide range AC-DC and the scope of the importation of two charge mode, easy to use; 2. Indicator is charged with two different state of saturation; 3. Excellent output short-circuit protection. The following models apply this model battery charger: Sanyo DBL50 The following models apply this model camera charger: VPC-HD1000

  Plastic Injection Molding services: Creating rubber, plastic, composite, and plastic-metal parts by injection molding/moulding.50 injection molding machines with robotic arms working for 24 hours. We provide OEM/ODM service

  Product Description: ? Key Specifications/Special Features: ? Injection mold cavities material: ASSAB 718H or Daido NAK80, imported ? Hardness for the cavities: 48 to 58hrc, after heat-treatment ?? Mold base: LKM ? Plastic material: Clear ABS, PC, and acrylic, etc. ? We customize all kinds of household applian...

  Key Specifications/Special Features:1.Injection mold cavities material: ASSAB 718H or S136H, imported;2. Hardness for the cavities: 48 to 58hrc, after heat-treatment;3. Mold base: LKM;4. Plastic material: ABS, gray, black, or clear; 5. Silk Screen printing;6. OEM production is welcomed.

  Hot runner, YUDO Customized for customers Mold Base: LKM Mold cavity steel: ASSAB718H, S136H

  Key Specifications/Special Features:  Injection mold cavities material: ASSAB 718H or Daido NAK80, imported Hardness for the cavities: 48 to 58hrc, after heat-treatment Mold base: LKM Plastic material: ABS, PC, and acrylic, etc.OEM production is welcomed

  1)Part name:Printer and Printer Accessories Mold and Mould2)Mold base: LKM , Standard:HASCO3)Cavity/core material: NAK804)Cavity number: 1 x 1 or more5)Lead time: 30 days6)Designs and OEM Orders are Welcome

   In-house Mold Design PIM 4 In-house Mold Design, Mold Making, Mold Flow Analysis for Thermoplastic We provide our customer with detailed tool design drawing We can make mold from 3D data in Pro/Engineer, Unigraphics, STEP, VDA or IGES format We can handle mold with weight up to 8,000kg We have more than 50 engineers/tool-makers/technicians in our tooling department We make molds for both in-house production and export

  Key Specifications/Special Features: - Injection mold cavities material: ASSAB 718H or Daido NAK80, imported; - Hardness for the cavities: 48 to 58hrc, after heat-treatment; - Mold base: LKM; - Plastic material: ABS, PC, and acrylic, etc. ; - OEM production is welcomed.

   High-precision Plastic Injection Mold Tooling Plastic injection mould tool-1 High-precision Plastic Injection Mold Tooling for Complicated Box with 4 Sliders Equipped with advanced CNC, EDM and wire-cutting machines; Strict quality inspection; Good communication with customers for product review and mold structure; Customer's designs are welcome.

  In-house Mold Design, Mold Making, Mold Flow Analysis for ThermoplasticWe provide our customer with detailed tool design drawing We can make mold from 3D data in Pro/Engineer, Unigraphics, STEP, VDA or IGES format We can handle mold with weight up to 8, 000kg We have more than 50 engineers/tool-makers/technicians in our tooling department We make molds for both in-house production and export

   1) Clear plastic part is made of clear PC, ABS, PMMA,GPPS material, has very good transparent; 2) Reasonable price; 3) Beautiful design; 4) Customers' logos are welcome; 5) Produced according to client requirement; 6) Customized designs are welcome;