Offer List

        HLSG-10/50 Intelligent High Effective Mixing and Granulating MachineControl System:With PLC Full-computer automatic contraol producted by German Siemens Co.,This system has such characteristics as friendly man-machine interface, screen cue operaion and graphic parameters. The set data can be input through simple touch keyboard and the technological parameters can be automat-tically memorized, so you only need to touch the Menu Key for the next repround-uction. Features :HMI,screen tip, Siemens PLC full computerized-control. Solid and round grain, with uniform grain size and high product yield. Mixing and granulation are finished in one step, so the efficiency is increased 4 to 5 times. Automatic dischagre. Smaller floor space requirement, and short cleaning time. Save 15-25% dosages of binder and shorten drying time. Totally closed-loop production, according to GMP. It can still obtain good effect when specific weight difference between main drug and subsidiary drugs as well as uxiliary materials are great. Spraying feature is designed to solve the preblem of extracturm powder granulation. Low noise

        Application:                                                                                          This dryer is widely suitable for drying wet granule and powder material in pharmaceutical, chemical, foodstuff etc. industry, and especially suitable for drying the big granules and the small lumps etc. viscosity material after granulating from TVG Series Granulators.Working Principle:Cleaned heat air is fed to the product when drying in order to evaporate water or an organic solvent. Different temp-erature and times are required depending upon the product quality and the desired residual moisture. As the evaporation of the solvent cools the product, relatively high temperature can be used for drying  without overheating the product. At the same time, it is important to mix the product well during drying.Features:Material vessel adopt gasbag-style air seal.The fluid bed is round structure, there is no dead corner. There is the stirring device in the vessel, prevent the agglomeration of the wet material and forming groove-flow during drying, which can make the material drying homogenization and quickly.The cloth bag filter at dryer top is made from anti-static special fiber, it is benefit for the safety operation.The operation is under the sealed and negative pressure. The design conforms to cGMP Standard.The drying is fast, just need 20-30 minutes for one batch.  

        Application:                                                                                       TSMH series vacuum mixer homogenizer is widely used in processing the cream products in cosmetic, pharmaceutical industries. It's specially used for emulsifying the material that viscidity thicker and solid content higher. This machine is designed according to the cosmetic and ointment productionadvanced technology. It is made up of pretreatment tank, vacuum emulsification mixing tank, vacuum pump, hydraulicsystem, material discharging system, electric control systemand working platform etc. Features:  1. Steady performance and good homogenizing, easy to operate and clean.2. Adopt upper coaxial triple blender, lift cover by hydraulic, high speed homogenizing blender (Speed: 0-3500 rpm, frequency speed regulation), l ower speed scraper blender (Speed: 10-70 rpm, frequency speed regulation), Homogenizer adopt fast cutting vortex type emulsification blenders which can scrape and blend in a low speed and cling to the tank wall and bottom. Material feeding by vacuum, prevent the powder flying if feeding powder material. The whole working procedure is operated under the vacuum status, prevent the material comes to the bubbles after high speed blending and can meet the requirement of sanitation and asepsis. CIP system has been included, The part contact with the material of the vessel is made from SUS 316L (SUS304) S.S. Inner surface of the vessel adopt mirror polishing. In order to ensure the stabilization of the electric control part, this electric control parts from Siemens, button switch from Japan Fuji, inverter from Panasonic, Vacuum pump from Siemens. Machine design meet GMP requirement!

        Application:                                                                                       Model TGB-E Series High Efficiency Film Coating Machine are widely used for coating various tablets, pills and sweets with organic film, water-soluble film, slow and controlled release film and sugar film etc in pharmaceutical, nutrition, foodstuff, and sweets industries. And it has such characteristics as high efficiency,low energy consumption, easy to clean and operate, and take small floor area etc. The machine adopt advanced design concept, has compact structure, meet cGMP standard completely. It's the ideal coating equipment for your choice. We also can solve the coating problem and supply the coating crafts for you. (In addition, we also can supply the none-perforated coating machine for you)Working Principle:The tablets need to be film coated is running a continuous orbital motion within the closed rotating drum under the action of a streamline guide plate. During the motion,coating solution sprays automatically according to the crafts process and rational crafts parameters, at the same time, hot air is supplied under negative pressure status, hot air pass through the tablets and exhaust from the bottom of the tablets layers, it will make the coating solution sprayed on the tablet surface dry rapidly and evenly, thus forming a solid and smooth film on the tablet surface.Features: All the operation, including the control of hot air temperature and adjustment of drum speed, are controlled by SIEMENS PLC and color touch screen system. Under the action of the agitator of streamline guide plate type, the tablets are tumbling smoothly and exchanging frequently, thus eliminating the tablets to fall from a high place and colliding, solving the problem of tablets broken and chipped edge, and improving the rate offinished products. The narrow guide plate prevent the coating material paste on its surface, thus saving the coating material and improving the coating quality.   Adopt the constant-pressure variable peristaltic pump, cancel the return pipe. The turning radius of the roller varies along with the pressure change. The supplied coating material and the spraying volume are balanced automatically; therefore, stabilizing the effect of atomization, simplifying the spray system, preventing the spray gun from plugging-up, and saving the coating material. Moreover, the cleaning is simple and there are no dead corners.    The patented spray gun is especially designed and processed for the film coating machine, atomization evenly and large sprayingarea. And the universal adjustable spraying head without dosing limit. The washing mechanism of the spray gun can prevent the spraying gun clogging, and make the film coating can proceed continuously,  thus reduced the coating time and saved the coating material. Equipped with the production data print function and advanced CIP system.

        Brief: This machine is an intermittent motion and dosing disk type automatic capsule filler, it's widely used for filling medicine powder/granule/pellet in pharmaceutical and nutrition industriesetc.Features: Machine design meets GMP requirements and has CE certificate. Closed turret and dosing station, prevent the powder come into the turret, easy to operate, clean and change over the mould. New turret design, adopt 90 linear bearings from Japan to guarantee the machine precision and use life. Adopt bigger cam & dosing disk design, enhance the stability of the machine and extend the use life of the machine.Equipped with the oil pump for supply the lubricate oil to the cam channel, reduce the abrasion and extend the use life of the parts. Automatic capsule switch, controlled by the touch screen via PLC. Touch screen with user-friendly graphic operator panel.

        

        The HDZ-65F vertical intermittent cartooning machine is designed for low/medium-production packaging lines and is suitable to handle pharmaceutical, chemical, cosmetic and food products. The HDZ-65F compact design allows easy operator access and makes it suitable forinstallation in space restricted areas. It has following main functions:Automatic folding (1~4 folding) and conveying of manual leaflet, automatic material categorizing and feeding; automatic paper carton spreading, manual leaflet and material are loaded into carton automatically, synchronous (3-row) batch number printing, automatic paper cartonsealing, automatic waster eliminatingFeatures:Main machine adopts mechanical drive of cam and crank connecting link, and working of each functional part is in harmony, stable and reliable.Single motor driving, Variable frequency speed regulation, PLC+touch screen control system,automatic counting function, operation is simple,running is stable.Photoelectric detection and monitoring system to realize overload protection, indication of failure diagnosis, and automatic stop running if there is some trouble.Machine has (manual and automatic) two status of running , you can choose any one according to your requirement.Under the specified range, can realizes various specifications carton packaging without change any parts.

        Intermittent star-tray positioning, machine will stop automatically If there is no bottle or not correct bottle orientation. Caps falling by vibrating from the round disk. Pick up the caps by Robot, bottle orientation is correctly the caps are held by cylinder (The holding force can be regulated), there's no Damage during capping. The wresting force can be adjusted enable to lock Different caps. There's cushion device on the head of the Locking cap, it further reduce the shattering rate. The machine has several self-inspection points, it will Stop automatically it there is no bottle to lock, exit blocking Out, bottle orientation not correct, bottle dumpage. Different bottles and caps just change the locking head parts and the star Tray accordingly, the replacing operation is easy. Main Technical Specifications Model TSC50 Capping Type crew capping Capacity 40-50 Bottles /min Power Supply 1.2 Kw 380V 50Hz (Optional) Air Consumption 4Kg   30L/ min Machine Weight 700kg

        TRUSTAR TBF Series Bottle Filling Line is suitable for counting and filling variety tablets and capsules into plastic or glass bottles, it's widely used in pharmaceutical, nutrition and foodstuff etc. industries. The whole line included the bottle arranging, counting and filling, paper and desiccant inserting, capping, inspecting, induction sealing and labeling functions.he Most Complete Innovative and Affordable Bottle Packaging Lines in the market Output:  Up to 70 bottles/min. on Mid-Speed  Bottle Filling Lines          Up to 100 bottles/min. on Hi-Speed  Bottle Filling Lines Available Pre-Tablet Loading System with Level Sensor No Change Parts Required--All contact parts can be dismantled without tools. 3-Level Vibrating Trays for Feeding 2 Separate Vibratory Sections; 2 Separate Hoppers on TSL-24 Channel Counter Standard Dual Lane Sanitary Conveyor U.S. Banner Sensors & Japan PLC Control and Color Touch Screen Panel Free Integration, Set-Up, Installation and Training on purchase of our complete bottling line Conformance to cGMP standard  HIGH-SPEED BOTTLING LINE INCLUDES: Hi-Speed Bottle Unscrambler   Capacity: Up to 360 bottles/min. Dimension & Weight: 35" x 35" x 51" / 330 pounds   TSL-24 Automatic Counter & Filler   Capacity: Up to 100 bottles/min.   Air Consumption: 20 liters/min.   Dimension & Weight: 110" x 55" x 67" / 890 pounds   TSG-200 Automatic In-Line Capper   Capacity: 50-120 bottles/min.   Air Consumption: 15 liters/min.   Dimension & Weight: 71" x 35" x 59" / 1300 pounds   TJSG Alu. Foil & Cap Inspecting/Rejecting Unit   Capacity: 60-100 bottles/min.   Air Consumption: 10 liters/min.   Dimension & Weight: 16" x 19" x 51" / 45 pounds   TSZ-2 Automatic Cottoner   TSZ-3 Automatic Desiccant Inserter   Capacity: 40-70 bottles/min.   Air Consumption: 40 liters/min.   Dimension & Weight: 47" x 24" x 59" / 260 pounds   2 Units required of each for HI-Speed Bottling Line   TIS-2000 Automatic Induction Sealer   Capacity: 80-150 bottles/min.   Dimension & Weight: 71" x 24" x 55" / 450 pounds   TL-200 Automatic Labeler with Accumulation Tray   Capacity: 60-150 bottles/min.   Air Consumption: 15 liters/min.   Dimension & Weight: 83" x 24" x 51" / 550 pounds

        This machine is widely used for packing tablets, capsules and other similar shape solid articles with alu-plastics & alu-alu blister in pharmaceutical, chemical, foodstuff industries. The machine can finish the following actions automatically: Aluminium foil or Plastic (PVC) blister forming, automatic material feeding, PTP alu-foil press and heat-sealing, press the batch number & perforation and punching.Features: Temperature control detection for heating plate, overload protection for main motor, packaging material level detection for forming alu-foil (PVC) and PTP-lid alu-foil. Mechanical friction wheel speed reduction and regulation, which is superior to mechanical constant-ratio speed reducer in speed regulation and driving. Adopt four-working station (forming, sealing, perforation, punching) coaxial driving (integral key) to improve driving strength and absolute synchrony in working. Machine adopt opened structure, working status of each functional part is viewable well, and it is easy and convenient to adjust and maintain. Adopt modular moulds, it is easy and convenient to install, adjust and change over the mould. It's suitable for packing various products. Mould cost is lower. Speed controlled by frequency inverter, the stroke can be adjusted under the stroke range. Adopt PLC +touch screen control system, can indicate the trouble cause, it's easy to operate and maintain. Both alu-alu and alu-plastics blister packaging can be realized via change the concerned parts. The photoelectric register device (Optional) can be equipped, make the blister sheet more beautiful.

         The machine is mainly used for the operations of mixing, granulating, drying and coating of granule "Top Spraying", etc. of powder material in pharmaceutical industry, foodstuff industry, chemical industry, etc. such as granule of tablet, granule for quick resolving drinking, condiment. The powder granule in vessel (fluid bed) appears in the state of fluidization. It is preheated and mixed with clean and heated air. At the same time the solution of adhesive is sprayed into the container. It makes the particles become granulating that contains adhesive. Being of unceasing dry through hot air, the moisture in the granulating is evaporated. The process is carried out continuously. Finally it forms ideal, uniform and porous granules. Pharmaceutical industry ,tablet capsule, low sugar or no sugar granule of Chinese traditional medicine. Foodstuff: cocoa, coffee, milk powder, juice of granulate, flavoring and so on. Other industries :pesticide, feed, chemical fertilizer, pigment, dyestuff and so on. Drying: powder or granule state of wet material Coating: protection layer, color, controlled release, film, or bowels solved coating of granules and pills

         Brief: Trustar is one of the leading professional manufacturers, We can provide and services excellent soft gelatin encapsulation machines with our newly patented feature of a solvent free system, that is considered one of the latest in soft geltin encapsulation technology. We are sure that our soft gelatin encapsulation machines will be suitable for all of your GMP plant requirements. We are considered a preferred supplier of turnkey soft gelatin encapsulation machine for manufacturing plants worldwide. We would like to supply the world with our newly patented and state-of-the art, advanced machine with the most competitive price, highest quality and service. Our model TSR-300/250/200/180 machine also can process the paintball. TSR-250/300 Soft Gelatin Encapsulation Machine Model   TSR-300                            TSR-250 Size of Die Roller  Φ50X300mm                  Φ50X250 Die Roller Speed  0-4 rmp                       0-4 rmp Supply Volume of Single Plunger  0-2ml               0-2ml Dosage Filling tolerance    Less than 2%               Less than 2% Power Supply 10Kw  AC 380V 50Hz (optional)  9w  AC 380V 50Hz (optional)  Machine Size    1880X1050X2000mm             1880X1000X2000mmMachine Weight   1600Kg                          150Kg

        Characteristics:These machines have many features such as: water spraying, ultrasonic washing, alternating water and compressed air flushing, drying, sterilizing, cooling, filling,gas flushing, sealing etc. It adopts photoelectric technology, PLC and colortouch LCD screen for the control system. With such high degree automation, feweroperators needed to use this machine. In order to meet the GMP requirements, laminar air flow above the filling and sealingmachine is included. This line is highly flexible, can be used for 1 to 5 ml ampoules, with few partsneeded to be replaced. This line is the highest output ampoule compact line in the world at present.This line consists of three single machines: 1. Vertical Ultrasonic ampoule machine, type: QCL100 2. Sterilizing and Drying Tunnel, type: KSZ620/60(A) 3. Ampoule filling and sealing machine, type: AGF10/1-5 Each machine can function independently, or can be jointed respectively which carriedout as a compact line. The advanced type of this line can be used for vials filling and plugging

        Application: It is a new genneration packaging machine which researched and manufactured by our factory.This machine correct designed patterns automatically,and can automatically finish the whole process. Including feeding,print production date, photoelectric digital track, correct designed patterns, oil-dripping, wrapping and molding, thermal sealing ,counting ect. It is usable for small objects' square-shaped packaging or round-shaped packaging, such as condom,commodity,selectric parts,pharmacutical equipments and so on. The use of advanced photoelectric digital tracking system makes it's possible to set the length of package and it can get correct designed patterns. Synchronous package pulling system makes the movement of the packages smooth and accurate. Characteristics: 1.Adopt PLC control system and frequency transducer,which brings reliable working,easy operation, convinient maintain and stops automatically when malfunction. 2.It is a multi-function packaging machine,it is usable for both round-shape & square-shape packages (by change the mould). 3.Adopt orientation system of intelligent photoelectricity cursor, and double aspects' rectify deviation,which make the packaging accurate. 4.Automatically finish the processes of film-slitting, printing batch NO.,rectify deviation, oil dropping, sealing,waste materials' cutting,single bag or random bag count cutting ect. 5.independent PID to control the temperature,suitable for more films. Main Technical Parameter : Packaging speed 30-80 bags/min (adjustable with a frequency controller) Packing material PP/PE, compound film, Aluminum foil compound film, paper-plastic etc. Bag sizes 58X58mm (suitable for both square and round shape) Power supply 220V 50Hz Motor power 4Kw Overall weight 950kg machine dimensions 3200x1200x1800mm

        Applications: The machine is suitable for the dual bag packing of small grain-like materials, such as tea leafs, medicinal tea and health care and tea industries in granular shaped ingredients.. Features: The machine is a latest type of heated sealing packing machine, which has multifunction, can automatically packing. The main feature of the machine is one-time packing for the inner and outer bag, avoiding hands directly contacting with stuff materials, improving the efficiency. The inner bag is made of filter cotton paper, which can be automatically packed with thread and label. The outer bag is composite paper. The advantages are photoelectric location for the tag and outer bag, adjustment to the need of the content, length of inner bag and outer bag, and tag. The dimension of inner and outer bag can be adjusted according to the need that to achieve the perfect shape, to upgrade the appearance for the product, then add the value of it. Packing material: paper/plastic,plastic/plastic,plastic/aluminum/plastic,paper/aluminum/plastic.tea paperthreadtag Technical Data: Type TP-18I TP-18II Features The inner bag without thread and bag The inner bag with thread and tag automatically Filling range 3-15(ml) 3-15(ml) Outer bag (L)80-120mm  (W)70-90mm (L)80-120mm (W)70-90mm   Inner bag (L)50-70mm   (W)50-80mm (L)50-70mm  (W)50-80mm Capacity 30-60(bag/min) 30-40(bag/min) Tag size   (L)20-24 mm (W)40-55 mm Thread length   155 mm Total power 220V/50HZ/3.7kw 220V/50HZ/3.7kw Demension 1000(L)x950(W)x2000(H)mm 900(L)x610(W)x1500(H)mm Weight 500kg 500kg

        Features:  This model is our newest model. This model is a new type heat-sealing, multifunction, automatic packing machine. This machine enlarges the capacity of tea bag and remains the automatic boxing device. It changes the sealing way of envelope making, improves the flexibility of envelope packing material. It ensure the realization of using multiple heat-seal laminated films in the envelope pack such as paper/aluminium/polyethylene, etc. It provides you exquisite envelope pack which were airtight and freshkeeping. It is advanced on the basis of Model DXDC15 and its appearance is more exquisite.        Technical Data: Type DXDC8IV Capacity 105+5 bags /minute Tea volume Max. 8cm3 (02.4gram black tea) Envelope dimension 80mm×70mm Bag dimension 65mm×62.5mm Tag dimension 28mm×24mm Thread length 210mm Total power 2.36KW Net/Gross weight 1210kg; 1410kg Overall dimension 1.688m*1.33m*2.205m Packing box dimension 1.84m*1.29m*1.89m *Depending on product property and filling range