Fiber optic patchcord
We supply fiber optic patch cord,LC,SC/APC,ST, E2000/APC,MU,FC,MT-RJ, SC, MPO,MTP, FC/APC, ST/APC, LC/APC, E2000,simplex, duplex,single mode,9/125,SM, multimode,MM, 50/125, 62.5/125.

  Features: Low insertion loss High return loss User friendly Compact size ? Ordering information: Connector #1： MPO/Male or MPO/Female Connector #2： MPO/Male or MPO/Female Fiber Count: 4 = 4-fiber; 8 = 8-fiber; 12 = 12-fiber Fiber Type: SM = Singlemode; 62=62.5/125μm; 50=50/125μm Cable Type: ?Ribbon cable; ?Bare ribbon; ?Distribution cable Cable Length: Length in meter, i.e. 5 = 5m

  Mode Conditioning Patchcords are a duplex multimode cord that has a small length of singlemode fiber at the start of the transmission leg. These are tested utilizing the industries latest equipment for superior quality. Mode Conditioning Patchcords are assembled with connectors using 62.5/125um or 50/125um fiber. We supply mode conditioning cables in various combinations of SC, ST, MT-RJ,and LC with very short lead time/ Features: IEEE 802.3z standard compliant Different connector polish options MM cable options Connector types options, permanent offset closure/ ?

   OM3 optical fiber systems are the pinnacle of multimode fiber design. To utilise the new 10Gbs Ethernet protocols in an optical fiber system requires either a full blown singlemode solution or OM3 50/125 multimode fiber. We suply patchcord OM3 with various conector, and customerized fiber length. Pre-connected fan out cable is becoming more popular for fiber installation project It is definitely an efficient and economical solution rather than on site termination or splicing. Just simply lay the cable and do patching Splitting fiber in ODF FC, SC, LC, MU, ST and DIN connector are available Polishing: PC, UPC and APC Applicable to connect the cable with 4, 8, 12, 12 x N fiber to ODF

  Loopback patch cord provides a media of return path for a signal, whether the signal is for testing purposes or due to network restoration. In the case of testing, the loopback signal is used fordiagnosing a problem. Sending a loopback test to a network equipment, one at a time, is a technique for isolating a problem. Its performance is as good as that of a general patch cord. Features: 1. Low Insertion Loss, UL OFNR cable 2. High bandwidth, high tensile strength, small bend radius 3. Meet all standard test equipment interface, easy to apply Order information Connector type, polish type, fiber type, Jacket type..