Inclinometer,Infrared thermometer

  Specifications of SST700 series InclinometerAbsolute accuracy: ±0.01°Response time: 0. 1s or 0.3sOperating temp:-40~85℃1500g shock, 10g vibrationAnalog or digital outputMilitary class, IP67 protectionSingle axisAuto-zero technology Aiming at the military industry, SST700 series inclinometer is developed as a high performance tilt angle measurement product, which meets the requirements of high accuracy and harsh environment. Blending with Vigor's many year sensors designing experience, SST700 has acquired enormous promotions in reliability, accuracy, stability and adaptability to environment. SST700 series' absolute accuracy contains temperature drift, time drift, shock and vibration stability, linearity and so on. Under room temperature environment, SST700 series inclinometer's accuracy can reach 4 arc-seconds.According to different application request, Vigor can provide each kind of special solution, such as sealing property, zero stability, zero accuracy, measuring range, power supply, shock and environmental performance index. Available Options of SST700 series Inclinometer:Complete environmental performance testing reportAll stainless steel housing100m underwater sealingField readoutTechnical Parameters of SST700 series Inclinometer: Range ±5°, ±10°, ±15°, ±30° Axis Single axis Accuracy ±0.01°(absolute) Resolution 0.001° Response time 0.3s(SST710), 0.1s(SST730, SST750) Update rate 20Hz(SST730), 25Hz(SST750) Output 4~20mA(SST710) RS485 (SST730) CAN2.0B (SST750) Power supply 9~36VDC Consumption ≥150mA Operating temperature -40~85℃ Storage temperature -50~125℃ Protection IP67 EMC Compatible with CE Vibration 10g, half of sine, 20~2000Hz Shock 1500g, 11ms Housing Stainless steel base Weight 1500 g

  Specifications of SST600 series Inclinometer±2 arc-seconds accuracy1.0s response time±2 arc-seconds temperature drift-20~65℃ operating temperature±2 arc-seconds stabilization within 8 hoursSingle or double axisStatic measurementShort warning time With smaller range and higher accuracy, SST600 series inclinometer adapts to static environment.SST600 series inclinometer uses sensing element with higher sensitivity, the one-to-one temperature and linearity compensation procedure, outstanding filter characteristic, good machine-finishing production, to result in better stability.Usually, performance of most inclinometers with small measuring range and high sensitivity is stated under room temperature. It is very difficult for the users to make compensation or process for their final requirements; SST600 series inclinometer from Vigor has solved this problem for end users, and provides all kinds of different outputs.For different application, SST600 series inclinometer provides options to choose:Complete performance & environment testing report,All stainless steel housing100m underwater sealingReadout or software via PCDifferent temperature compensation rangesVarious dimensions and forms Technical Parameters of SST600 series Inclinometer: Range ±0.5°, ±1°, ±3°, ±5° Axis 1 axis: SST610, SST630, SST650 2 axis: SST620, SST640, SST660 Accuracy ±2 arc-seconds(25 ℃) Resolution 0.1 arc-second Response time 1.0s (others upon request) Update rate 4Hz(SST650, SST660) Output ±5VDC(SST610,SST620) 0.5~4.5VDC(SST620, SST630) RS232 (SST650, SST660) Total temperature drift ±5 arc-seconds over -10 to 50℃ Zero stability ±2 arc-seconds (SST610,SST620) ±1 arc-seconds (SST630~SST660) Zero repeatability ±2 arc-seconds (SST610,SST620) ±1 arc-seconds (SST630~SST660) Power supply 9~36VDC Consumption ≥20mA Operating temperature -20~65℃ Storage temperature -40~125℃ Protection IP65 EMC Compatible with CE certificate Vibration 2g,half of sine, 20~500Hz Shock 500g, 11ms Housing Stainless steel base, Aluminum housing Weight 1500 g Application of SST600 series Inclinometer:Fixed satellite antenna platform leveling, bridge health monitoring, earthquake monitoring, coastline monitoring, mountain massif landslide monitoring, dam monitoring, roadbed monitoring, deflection survey, optical table leveling, high energy physical testing, flatness measuring and so on.

  Specifications of SST300 series InclinometerMeasurement range: ±5°~(0~360°) Measurement accuracy: 0.01° Temperature drift: ±0.05°Resolution: 0.001°Operating temperature: -40~85℃Response time: 0.3sDigital update rate: 10HzSupply: 9~36VDC Analog and digital output SST300 series inclinometer provides broad measuring range, high accuracy, low temperature drift and various types of output, satisfies many kinds of applied situations, with high cost-performance ratio. SST300 series inclinometer integrates power management (anti-polarity and over-voltage protection), temperature compensation (within -20~65℃), linearity, high long-term stability, good EMI and anti-vibration ability, has solved the problem of temperature drift and the linearity which most of existing inclinometers need users to carry on compensation, low update rate, weak EMI ability and so on.SST300 series inclinometer provides more types of output, including CANopen and analog & digital output. SST300 series has more advanced product to adapt to different applications demand. Upon request, Vigor would like to change dimension、output、combined measuring range (measuring range of X axis and Y axis is different)、response time, etc.Technical Parameters of SST300 Series Inclinometer: Range ±5°,±10°,±15°,±30°,±45°,±60°,±90°, 0～360° Axis 1 axis: SST310, SST330, SST350, SST370, SST3902 axises: SST320, SST340, SST360, SST380 Accuracy ±0.01°(25℃) Resolution 0.001° Response time 0.3s Update rate 10Hz(SST350, SST360, SST370, SST380, SST390) Output 4～20mA (SST310,SST320)0～5VDC (SST330,SST340)RS232+(4～20mA)(SST350,SST390)CAN2.0B (SST270, SST290)CANopen (SST380) Temperature drift ±0.05° over-20 to 65℃ Power supply 9～36VDC Consumption ≥50 mA Operating temperature -40～85℃ Storage temperature -40～125℃ Protection IP65 EMC Compatible with CE certificate Vibration 10g,half of sine,20～1000Hz Shock 500g, 11ms Housing Aluminum Weight 240 gApplication of SST300 Series InclinometerFactory automation, platform leveling, construction machinery, drilling machinery, agricultural machinery, lifting and logistics, aircraft, ship, transportation, safety engineering, continuous casting, etc.

  Specifications of SST100 Series InclinometerRang: ±15°,±30°Accuracy: ≤0.1°Resolution: 0.01°Operating temperature: -40~85℃IP65 ProtectionResponse time: 0.3sPower supply: 9~36VDCTotal temperature drift ≤±0.2 ° Technical Performance of SST100 Series Inclinometer Model SST110 SST120 SST130 SST140 SST150 SST160 SST170 SST180 SST190 Range ±15° ±15° ±15° ±15° ±30° ±30° ±15° ±15° ±15° Axis 2 2 2 2 2 2 2 2 2 25℃ Accuracy ±0.2° ±0.2° ±0.2° ±0.2° ±0.3° ±0.3° ±0.1° ±0.1° ±0.1° Resolution N/A N/A N/A 0.01° 0.01° 0.01° 0.01° 0.01° 0.01° ResponseTime 1s 1s 0.3s 0.3s 0.3s 0.3s 0.3s 0.3s 0.3s Temp. Drift ±0.5° ±0.5° ±0.3° ±0.3° ±0.3° ±0.3° ±0.2° ±0.2° ±0.2° SwitchCapacity 2 outputs1A 2 outputs1A 4 outputs1A 4 outputs1A 2 outputs1A 2 outputs1A 2 outputs1A 2 outputs1A 2 outputs1A Alarm X,Y Omni X,Y Omni X,Y Omni X,Y X,Y X,Y OutputSignal No No No 0～5 VDC 4～20mA 4～20mA 4～20mA CAN2.0B CANOpen PowerSupply Vehiclebattery Vehiclebattery Vehiclebattery 9～36VDC 9～ 36VDC 9～ 36VDC 9～ 36VDC 9～ 36VDC 9～ 36VDC OperatingTemp －40～85℃ －40～85℃ －40～85℃ －40～85℃ －40～85℃ －40～85℃ －40～85℃ －40～85℃ －40～85℃ Housing AI/ABS AI/ABS AI/ABS AI/ABS AI/ABS AI/ABS AI/ABS AI/ABS AI/ABSApplication of SST100 Series Inclinometer:SST100 Series Inclinometer suits for cranes, crawler cranes, fire engines in high altitudes, concrete pump truck, paver, excavators, rollers, garbage trucks, garden machinery, high-altitude vehicles, agricultural machinery, forestry machinery, road / bridge maintenance equipment, logistics and distribution equipment, marine equipment, transportation equipment, safety engineering, etc.

  Introduction of SST010 Series Inclinometer:SST010 series tilt modules provide many kinds of ranges, measuring accuracy, output types, dimensions and working conditions for satisfying OEM application.According to different application demands, Vigor provides different solutions based on different principles, including different capacitance, electrolyte, magnet and so on.Part of SST010 series inclinometer adopts differential capacitance measuring technique; others adopt electrolyte measuring technique. Depending on high performance technical platform, testing device and stable manufacturing craft, Vigor is in a position to safeguard volume production of different specifications.SST010 series inclinometer is embedded into other PCB board directly and inserted into a housing. Any model of product can be improved according to requirements of OEM customer correspondingly, Such as the output interface, data formation, temperature compensated range, temperature sensor signal output, linearity, PCB size and so on.Technical Performance of SST010 Series Inclinometer Model Range Accuracy Response time Operating Temp. Output Signal SST011 ±10°～±180° ±0.5° 0.3s －40～85°C RS232 / switch SST012 ±45° ±0.2° RS232 / switch SST013 ±30° ±0.1° CAN2.0B SST014 ±15° ±0.05° RS232 SST015 ±10° ±0.01° 0.3s －20～65°C RS232/12C/SPI SST016 ±5° ±10″ 0.3s SST017 ±3° ±5″ 0.3s SST018 ±1° ±3″ 1s SST019 ±0.5° ±0.5″ 1sApplication of SST010 Series InclinometerSST010 Series Inclinometer suits for using purposes of wheel alignment, automobile security alarm, compass compensation, virtual reality, optical instrument, geoplane, laser collimator, perpendicular line measurement, theodolite, total station, automatic leveling platform, automatic platform, digital level meter, civil engineering, geological prospecting, municipal engineering, electrical tool, intelligent toy, household electrical appliance, etc.

  Industrial Compact Device Application of Infrared ProbeSpecifications of VTIR-0812 Infrared ProbeModel: VTIR-0812 Power Supply: 5VDC Accuracy: +/-2 ℃ or 2% of reading Distance Ratio: D:S= 10:1 @ 95% energy Measurable temperature range: -20-500℃ Emissivity: 0.95 (adjustable via the SPI) Output signal: SPI Response time: 300ms (95% of response) Consumption：less than 20mA Operation temperature range： -10-70℃ Storage temperature range： -20-85℃ Wiring of VTIR-0812 Infrared Probe:Red : 5VDC “﹢” Green: SPI “SCK” Yellow: SPI“SDA” White: SPI“CS” Bare : 5VDC “﹣” (Ground)

  VTIR-02 is a contactless temperature measuring system based on the detection of infrared? radiation. VTIR-02 is equipped with an infrared sensor(Thermopile) in front. The Thermopile Sensor has to Be pointed at the target object. The basic working principle is : 1. Detection of infrared radiation with a Thermopile sensor 2. Further analogue signal processing 3. Calculation of ambient and object temperature using a microcontroller 4. Providing the ambient and objects temperature at digital output(SPI Operation)

  Infrared Sensors VTIR-1816 SeriesDigital/Analog outputRepeatability: Spectrum response: 8-14μm Accuracy: greater of ±2℃ or 2% of readingResponse Time: ≤500msTemperature compensatedMeasurable object distance: 0~10metersAdjustable emissivity via digital interfaceEasy to install and maintain, low cost Technical Performance - Infrared Sensors VTIR-1816 Series Model VTIR-1816 Resolution 0.1℃ Temperature range ~300 ℃, -20~300 ℃, 0~500 ℃, -20~500 ℃, 500~1500 ℃,0~1500℃ Accuracy ±2℃ or 2% of reading, whichever is greater Repeatability ±1℃ @ Spectral range 8～14μm Distance: Spot Ratio 10:1,12:1 Ambient Temperature 0～75℃ Storage Temperature -20～85℃ Response Time 250~500 ms Emissivity Default 0.95, (0.01~0.99 adjustable, step 0.01) Object Distance 0~10 m Dimensions Φ19mm X 100 mm Power Supply 5 VDC or 12 VDC, or 24 VDC (18~30 VDC) Analog Output 4~20mA, 0~5VDC or 10 mV/ ℃ Digital Output RS232, RS485, SPI, I2C, PWM Options Air Purging, Air/Water-cooled Housing, Mounting brackets, controller, readout

  Technical Performance of Infrared Sensors VTIR-5816 Series Model VTIR-5816 Resolution 0.1℃ Temperature range 0~300 ℃, -20~300 ℃, 0~500 ℃, -20~500 ℃, 500~1500 ℃,0~1500℃ Accuracy ±2℃ or 2% of reading, whichever is greater Repeatability ±1℃ @ Spectral range 8～14μm Distance: Spot Ratio 15:1,20:1,30:1，50:1 Ambient Temperature 0～75℃ Storage Temperature -20～85℃ Response Time 250~500 ms Emissivity Default 0.95, (0.01~0.99 adjustable, step 0.01) Object Distance 0~10 m Dimensions Φ30mm X 135 mm Power Supply 5 VDC or 12 VDC, or 24 VDC (18~30 VDC) Analog Output 4~20mA, 0~5VDC or 10 mV/℃ Digital Output RS232, RS485, SPI, I2C, PWM Options Air Purging, Air/Water-cooled Housing, Mounting brackets, controller, readout

  Specifications of SST400 series InclinometerMeasurement accuracy: ±20″Response time: 0.3sTemperature drift: ±0.03°Analog digital output10Hz update rate of digital outputOperating temperature: -40~85℃Anti-vibration and shockCE certificateHigh cost-performance ratio SST400 series inclinometer has high cost-performance ratio for industrial, civil engineering, etc. Features as 20 arc-second accuracy, more choices of range,more outputs,rugged and anodizing aluminum housing.SST400 series inclinometer uses advanced capacitive sensing element and differential output to minimize noise and thermal imbalance.Besides standard outputs , SST400 series has special types of output , such as RS485, RS422. SPI and so on .SST400 series inclinometer was built on the basis of SST300 series and improved on sensing element choosing, testing , software optimization , production craft optimization etc.Integrating LCD monitor in inclinometer, displaying measured angle directly, SST400 series can be used as a digital levelmeter. It also can transmit data with long distance.To meet customers' needs, with existing technical platform, Vigor provides different OEM products : housing , accuracy , compensated temperature range etc.Technical Parameters of SST400 series Inclinometer: Range ±5°, ±10°, ±15°, ±30°, ±45°, ±60°, ±90° Axis 1axis:SST410, SST430, SST450, SST470 2 axis: SST420, SST440, SST460, SST480 Accuracy ±20 arc-second(25 ℃) Resolution 1 arc-second Response time 0.3s Update rate 10Hz(SST450, SST460, SST470, SST480) Output 4~20mA (SST410, SST420) 0~5VDC (SST430, SST440) RS232+(4~20mA) (SST450, SST460)CAN2.0B (SST470, SST480) Temperature drift ±0.03°over -20 to 65℃ Power supply 9~36VDC Consumption ≥40mA Operating temperature -40~85℃ Storage temperature -40~125℃ Protection IP65 EMC Compatible with CE certificate Vibration 5g,half of sine,20~1000Hz Shock 500g, 11ms Housing Aluminum Weight 500 g Application of SST400 series InclinometerRail bed detection, railway and highway monitoring, high-performance construction machinery (paver, grader, drill, large-scale fire engine and large-scale cranes), trenchless technology (TBM, pipe jacking, tunneling), construction (ditch, pile), on-line monitoring of building (embedded or migrated construction), geological disaster monitoring, etc.

  Specifications of SST500 series InclinometerAccuracy: ±5 arc-secondsResponse time: 0.3sTemperature drift: ±0.005Stainless steel base, no deformation IP 65 protectionSuper stability and repeatability Analog and digital outputHarsh environment application SST500 series Inclinometer has higher accuracy, higher reliability and durability and can withstand harsh environment. SST500 series Inclinometer has 8 types of standard products to meet various applied situations. The heart-sensing element can withstand 1500g shock and 25g vibration. That means SST500 can adapt many harsh environments. With DSP technology and high-speed 24 bits A/D converter inside, SST500 series is with high response ability up to 0.05 seconds without data loss.SST500 series Inclinometer inclinometer can build temperature compensation from -10 to 65℃, which can help users to get more accurate data in different temperature. If necessary, for expanding compensated temperature range, please inquire Vigor.For standard output, SST500 series has 4 to 20mA, 0 to 5VDC, RS232, CAN2.0B with wide power supply, and Vigor Also provides other special output signals like TTY, CAN open, etc. Technical Parameters of SST500 series Inclinometer: Range ±5°, ±10°, ±15°, ±30°, ±45° Axis 1 axis: SST510, SST530, SST550, SST570 2 axises: SST520, SST540, SST560, SST580 Accuracy ±5 arc-seconds (25 ℃) Resolution 1 arc-second Response time 0.3s (others upon request) Update rate 10Hz(SST550, SST560, SST570, SST580) Output 4~20mA(SST510, SST520)0~5VDC(SST530, SST640)RS232 (SST550, SST560) CAN2.0B (SST570, SST580) Temperature drift ±0.005°over -10 to 65℃ Power supply 9~36VDC Consumption ≥70mA Operating temperature -40~85℃ Storage temperature -40~125℃ Protection IP65 EMC Compatible with CE certificate Vibration 10g,half of sine, 20~1000Hz Shock 500g, 11ms Housing Stainless steel base, Aluminum housing Weight 2500 g Applications of SST500 series Inclinometer:Heavy mining machine, tunneling, landslide and engineered slope monitor, TBM, pipe jacking, survey and guide system, railway monitoring and measuring facility, port and port detecting facility, dam measurement, equipment of nuclear industry etc.

  Infrared Sensors VTIR-3816 SeriesDigital/Analog outputRepeatability: Spectrum response: 8-14μm Accuracy: greater of ±2℃ or 2% of readingResponse Time: ≤500msTemperature compensatedMeasurable object distance: 0~10metersAdjustable emissivity via digital interfaceEasy to install and maintainTechnical Performance - Infrared Sensors VTIR-3816 Series Model VTIR-3816 Resolution 0.1℃ Temperature range 0~300 ℃, -20~300 ℃, 0~500 ℃, -20~500℃ Accuracy ±2℃ or 2% of reading, whichever is greater Repeatability ±1℃ @ Spectral range 8～14μm Distance: Spot Ratio 3:1, 5:1, 8:1 Ambient Temperature 0～75℃ Storage Temperature -20～85℃ Response Time 250~500 ms Emissivity Default 0.95, (0.01~0.99 adjustable, step 0.01) Object Distance 0~10 m Dimensions Φ26mm X 86 mm Power Supply 5 VDC or 12 VDC, or 24 VDC (18~30 VDC) Analog Output 4~20mA, 0~5VDC or 10 mV/ ℃ Digital Output RS232, RS485, SPI, I2C, PWM Options Air Purging, Air/Water-cooled Housing, Mounting brackets, controller, readout

  Specifications of SST200 series InclinometerMeasurement range: ±5 ° ~ ± 90°、0~360°Measurement accuracy: ± 0.03°Temperature drift: ±0.1°Resolution: 0.001°Operating temperature: -40~85℃Response time: 0.3sCE certificate SST200 series inclinometer mainly satisfies the low-end industrial applications.SST200 series inclinometer has 9 kinds of different specifications, and more outputs. It has the customized special output. The power management of SST200 series not only has anti-polarity protection, short-circuit protection, over-voltage protection, but also has automatic restoration of function and it can be connected directly with batteries.Under the situation of -20 ℃ to 65℃, the absolutely measuring accuracy of SST200 series is better than ± 0.1°, so as to satisfy the general industry. It also can be extended to wider temperature range and improved the accuracy of temperature compensation.SST290 inclinometer suits for the excavator, concrete pump car as well as pipeline-welding equipment. SST290 overcomes the shortcoming of old encoder, directly survey the angle based on absolute horizon. Its CAN2.0B can be connected with the majority of PLC.Technical Parameters of SST200 series Inclinometer: Range ±5°, ±10°, ±15°, ±30°, ±45°, ±60°, ±90°, 0~360° Axis 1 axis: SST210, SST230, SST250, SST270, SST2902 axises: SST220, SST240, SST260, SST280 Accuracy ±0.03°(25 ℃) Resolution 0.001° Response time 0.3s Update rate 10Hz (SST350, SST360, SST370, SST380, SST390) Output 4~20mA (SST210, SST220)0~5VDC (SST230, SST240) RS232+(4~20mA) (SST250, SST260) CAN2.0B (SST270, SST290)CANopen (SST280) Temperature drift ±0.1°over -20 to 65℃ Power supply 9~36VDC Consumption ≥50 mA Operating temperature -40~85℃ Storage temperature -40~125℃ Protection IP65 EMC Compatible with CE certificate Vibration 10g,half of sine, 20~1000Hz Shock 500g, 11ms Housing Aluminum Weight 240 g Application of SST200 series InclinometerAutomatic control, leveling platform, construction machinery, tunneling machinery, agricultural machinery, forestry machinery, cranes, road maintenance equipment, logistics and distribution equipment, marine equipment, transportation equipment, safety engineering, electric power facilities, medical equipment and so on.