Offer List

  9-19,9-26 High Pressure Centrifugal Ventilators are widely used to convey materials and non-adhesive gas.The medium for conveying should be no more than 80 deg C.There dust or hard granulated matters should be less than 150 mg/m3.The fans are suitable for smithery industry,glass industry,ceramics industry,radio industry,electroplating industry,battery industry ,etc to ventilate through high pressure.It is also for the industries that do processing food,feed,fine ore,plastic,etc to convey materials.

  9-19,9-26 High Pressure Centrifugal Ventilators are widely used to convey materials and non-adhesive gas.The medium for conveying should be no more than 80 deg C.There dust or hard granulated matters should be less than 150 mg/m3.The fans are suitable for smithery industry,glass industry,ceramics industry,radio industry,electroplating industry,battery industry ,etc to ventilate through high pressure.It is also for the industries that do processing food,feed,fine ore,plastic,etc to convey materials.

  CF4-82 is driven in type A.The motor is fixed in one side of the fans.No extra holder is needed.The structure is compact and is convenient for installation.It looks beautiful.The inlet is easy to be adjusted.the blades made of flat plate can reduce the greasy dirt on the blades and is easy to clean.There is a set for noise elimination in the inlet so it produces less noise than 4-72 in same size. This kind of fan is specially designed for kitchen to exhaust smoke.It can also be used to ventilate and exchange air.

  ZDG series of low noise cabinet centrifugal ventilators are new products we develp based on advanced technology home and abroad.It have two functions: exhaust in fire fighting ,and air exchange.It has features such as high efficiency,low noise,convenience for installation,steady operation,large air volume,high-temperature resistance,etc.It is new product for residential building to remove smoke when fire fighting.It's also attactive becasue of compact structure and beautiful appearance. The framework is made of sectional material .The box board is made of cold rolled steel sheet adopting double-decked structure.There are fireproofing and warm-keeping materials inside the ventilation so as to avoid condensation in high-temperature place.It is more efficient in lowing noise and reducing vibration.

  11-62E low noise multi-wing centrifugal fan is a product derived from 11-62A.It is driven by belt,and its air volume? and pressure can be adjusted.Therefore clients have more choice of paramters.This kind of fans have features of large air volume,low noise,steady operation.It's best choice for restaurant? and hotels to exhaust.

  11-62A Low noise multi-vane centrifugal ventilator is designed to meet the developing demand of purifying,environment protection, and noise lowing.The fans adopts multi-purpose optimized design of noise,effieciency and other parameters,and have a good pneumatic performance.Impeller and belt pullery are all strictly dynamic? balancing corrected.Therefore,it operated steadily?with low noise,large air volume,less vibration and long life. It is widely used for the kitchens?in canteens,hotels,food store to ventilate and exhaust.It is useful and well-adaptable.

  DDT Low Noise Multi-wing Centrifugal Ventilator is designed to meet the developing demand of purifying,environment protection, and noise lowing.The fans adopts multi-purpose optimized design of noise,effieciency and other parameters,and have a good pneumatic performance.Impeller and belt pullery are all strictly dynamic? balancing corrected.Therefore,it operated steadily?with low noise,large air volume,less vibration and long life. It is widely used for the kitchens?in canteens,hotels,food store to ventilate and exhaust.It is useful and well-adaptable.

  BZF series of against explosion axile draft fans are used in the dangerous places : Area1 and Area2,where there are explosive air mixture at or below the level II kind B Stage,T4 Group.It is used for the plants and warehouse to ventilate ,exchange air or enhance heat dissipation. It should be operated in the following conditions:AC 50Hz,Voltage 220V or 380V. The place where there is no heavy corrosion gas and no obvious dust. We can add installation holders if clients request. The fans conform with the standard mark Exd II BT4. It is made up of explosion-proof motor,blades,ventilation canister,etc.The blades are made of aluminum and the ventilation canister is made of steel sheet welded with sectional material.The power line can be steel conduit or cabling.There is an earthing screw outside the fan. This series product is suitable for II kind of B the level T4 group and following rank,the group other fire damp mixture(1 area and 2 areas) The place,as the workshop,the warehouse well ventilated takes a breath or strengthens using of the warm air radiation. This series product also make additionally build peacefully according to installation shelf. This series product conforms to the explosion-proof to symbolize ExdII BT4 request.

  CZR series? low noise Centrifugal? AC blower/air blower CZR series of centrifugal blowers?that are driven by single-phase capacitance driving motor;CZT series are?driven by three-phase AC?asynchronous?motor .They can produce large air volume with high Wind Pressure.Saving energy,temperature shortly-increased,beautiful appearance and so on are their features. These blowers are widely used in households,canteens,small-scale boiler,ironmaking industry where they need?equipment to help combusting and blowing?film.They?can also be used to supply and cool down

  2JZ series double-stage & high pressure centrifugal blower is a new product that appears after we researched and developed based on a series of high pressure blower both at home and abroad.It is with high pressure and low noise.The structure of the impeller is double-stage.It's also attractive because of reasonable and compact design,beautiful appearance and steady operation. This kind of blowers are widely used in industries? where ventilation is needed such as the Smithery Industry,Glass Industry,Electroplating Industry,Ceramics Industry,etc? .They are also used in Granary,Feed Industry,mining Industry and so on to convey the materials.The medium should be air and other unnatural but harmless to human beings,non-corrosive gas.No adhesive matters are allowded.The dust in the air should be no more than 150mg/m3 and ambient temperature should be no more than 80 deg C.

  4-72-12 Movable air blower is designed specially for grain depot to lower temperature.The main part of the blower is 4-72 ventilator with high efficiency and low noise.The secondary part is a handcart.So the fans are movable.There are totally 10 specifications from No.2.8 to No.12.The driven type is C type.We can specially made according to clients' requirements.

  Product Description: CZR series? Centrifugal? AC blower/air blower CZR series of centrifugal blowers?that are driven by single-phase capacitance driving motor;CZT series are?driven by three-phase AC?asynchronous?motor .They can produce large air volume with high Wind Pressure.Saving energy,temperature shortly-increased,beautiful appearance and so on are their features. These blowers are widely used in households,canteens,small-scale boiler,ironmaking industry where they need?equipment to help combusting and blowing?film.They?can also be used to supply and cool down air.

   Y9-38 Boiler induction draft fan/ centrifugal ventilator This kind of ventilations are suitable for industrial boiler which has been matched with economizer and dust-exhausting set.The boiler evaporation amount should be 0.5-35t/h.The ambient temperature should be less than 250 deg C.You must install a exhausting set with efficiency more than 85% before using the fans,so that the dust in smoke going into the fans will be reduced.By doing this,it can not only reduce the pollution to the environment,but also enable the fans to be durable.

  T35-11,BT35,FT35 Axial-Flow Ventilators are products to replace 30K4 products.Based on analysis and comparation with the similar products abroad,through optimized design,the structure of the impeller is confirmed.The motor is improved and the loss of air flow is reduced.Therefore,the efficiency of the fans is 89.5% higher when the noise is 3.6dB lower than Noise?A standard.We strengthen the welding of blades and impeller so that the blades can avoid breaking. This series of fans are suitable to convey non-inflammable,non-explosive,non-corrosive gas in which no obvious dust can be found.The temperature shouldn't surpass 60 deg C.The fans are widely used in factories,warehouses,offices,residential houses to ventilate or enhance heat dissipation.They can be intervally installed in a long pipeline to increase the pressure in the pipe. BT35-11 is an Explosion-proof Axial-Flow Ventilators and it can be used to?exchange the inflammable and explosive gas.FT35-11 is a Corrosion-proof Axial-Flow ventilator which is used to convey the corrosive gas.Its performance and parameters is the same as T35-11's.

  WT35-11,FWT35-11 roofing axial-flow ventilators are with large air volume.They can be designed to be bidirectionally rotated and reversible. The fan's features are low noise,lightness,steady operation,high efficiency,corrosion-proof performance,etc.It is suitable for Oil industry,Chemical industry,Textile industry,Metallurgy industry etc to ventilate in the plants and warehouse.

  FA series of Axial-Flow Exhaust Fans are driven by single-phase capacitance operated motor.FTA series are driven by three-phase asynchronous motor.Their reasonable structure,beautiful appearance,and firmness has attracted many customers.They are also durable and can save energy. This kind of fans are suitable for factories,warehouses,offices,kitchens of canteens,basements,etc to exhaust and ventilate.They are for sunstroke prevention and cooling use.You can match it with shutters.