roll forming machine
roll forming machine, rollforming machines, roll former, china roll forming machines, roll forming machine suppliers, rollformer, metal roof roll former, steel roof roll forming machine, steel deck machine, roll formed steel, cable tray roll forming machine

  Roll Forming Machine for K Span System K-Span is high quality Pre-Painted Galvanized Steel Roofing, combining low prices with fast erection. KSPAN Building Systems refer to the first generation of Automatic Building Machines that can be used for Industrial, Agricultural, Housing, Institutional, Recreational or Commercial Building Needs. K-Span Building System offers excellent Institutional Buildings in an Economical manner . K-SPAN Building System is suitable for Farm, Barns, Vegetable Stores and Storage silos. The System can be used to create sheds to protect your vehicles. Aircraft Hangers can be created using the system. Moreover, low cost residential units can be erected in a quick manner 1. Main Parameter: 1.      Material to be rolled: Q235, Colorbond or galvanized Steel, coil 2.      Thickness of the material: ≤0.8-1.3 mm 3.      Coil width max: 914mm 4.      Inner diameter of the coil: 520mm, subject to buyer’s requirement 5.      Outer diameter of the coil: ≦1800mm 6.      Decoiler: 5000kg, manual expansion 7.      Roll stands: 19 8.      Main structure: wall style entire steel structure 9.      Driving system: chain transmission 10.  Main power: 5.5KW 11.  Main reducer: cycloid pin 12.  Cutting: Hydraulic cutting 13.  Power of hydraulic station: 3KW 14.  Material of blade: Cr12, heat treated HRC58-62 15.  Measure: encoder 16.  Controller: PLC 17.  Forming speed: about 5-15m/min 18.  Dimension : abt. 13m*1.3m*1.5m 19.  Weight: abt.13mt 20.  biting machine      21.  bending machine (if necessary)  Process: Manual decoiler——guiding——roll forming——hydraulic cutting——run out table

  Guardrail Machine 1. Main specification1.1 MaterialRaw material:Material to be roll formed:Q215,Q235A, strip.the vertical accuracy: 1.0mm/mThickness : 2.0-3.0mmWidth: Max 480mm;Inner diameter of coil: 508±20 mmOuter diameter of coil: 1200mmWeight of coil: 3TDimension of whole line: 16000mm×1800mm×1400mm1.2 Specification: Profile   Tolerance of cutting length: ±2mmRoll Forming Rate: 3-10M/minPower Voltage: 380V±10%;50HZ2. Work-flow:Loading coil--hydraulic uncoil--leveling and feeding---punching---feeding to roll forming---roll forming ---cutting ---run out sheet3.Equipment structure description3.1 Hydraulic DecoilerFunction: to support and release the coilThe frame is welding by H-beam,gearbox drive,brake device.Data: Capacity of loading 3TMotor: 1-2.2kwInner diameter of shaft: 508mmOuter diameter of coil: Max 1200mm 3.2 Leveling and feeding deviceFunction:release the head of coil and tow to the leveling device ,making the coil straight for the different width. Servo-motor drive ,feeding for step by step, and the tolerance of feeding is ±0.2mmData: Thickness of coil : 2.0-3.0mmWidth of coil: Max 480mm3.3 Punching deviceFunction:To punch the hole for connect and installationStructure:Hydraulic driver, two molds punch the hole exactlyData: Thickness of coil : 2.0-3.0mmMaterial of punch: Cr12 3.4 Feeding rollerFunction:to feed the sheet after punching and cutting to roll forming machine,motor driverStructure:The frame is welding by H-beam,the roller material is coated Cr(Zn),motor driverData:Thickness of coil :2.0-3.0m,width 500mm 3.5 Roll forming machineFunction:Roll forming for the profile of guardrailThere are two style for choose:Style one:Use independent frame (nodular cast iron) for high accuracy forming, and the stands can be changed easilyDate:Forming step: 17-step formDiameter of shaft:f90mm Material of roller:GCr15Space from one stand to another:Approx 480mmLine: 3~10m/min3.6 Cutting deviceFunction:To cut the coil for the right lengthStructure:hydraulic driver,measure the length automatically,cut automatically,Also control by hand.Data: Thickness of coil : 2.0-3.0mmMaterial of punch: Cr123.7 Run-out table Function:For the run-out formed sheetStructure:The roller is coated Cr (Zn)Data:Thickness of coil :2.0-3.0m,width 500mm3.8 Hydraulic systemFunction:To use the punching and cutting device drivingDescribe:The main control component adopt the famous brand (Italy ATOS),oil tank adopt the China famous brandPressure system : 0~16MPa3.9 Electric control systemThe whole line use the PLC control,LCD,Control the quantity, cutting length automatically with the airthmometer, it is operated by auto or manual 3.9.1 M/C controllingThe motor speed of M/C is adjusted by transducer; give an alarm when there are troubled.

  Description： （1）Load coils onto the double head decoiler’s expansion system. （2）Start the equipments and feed the material into the flattener manually. （3）The material after flattened is accurately fed into the mechanical puncher for ordinal punching. The accumulated tolerance of the central distance of holes is subject to the feeding system.  （4）The front and rear material stores are used to adjust the non synchronization caused by the discontinuous moving in punching. （5）The material after flattened and punched is rolled through the specially designed tooling station by station to form the required shape.  （6）At the end of the roll former a rectifying system is mounted to rectify the shape and straightness of the formed product to the final profile. （7）The hydraulic cutter controlled by photoelectric switch and measuring system is used to cut the finished material into required length. （8）The finished products, counted by the PLC automatically, are conveyed to the simple run out table where the workers can take them for package or to the warehouse.  Ⅱ. Main Configuration and Technical DetailsThe line is mainly consist of one double head decoiler, one flattener, one front material store, one serve feeder, one mechanical puncher, one roll former, one rectifying system, one cutting system, one hydraulic system, one electrical controlling system and one run out table, etc. 1. Double Head Decoiler This decoiler with a steel welded structure, decoiling passively, adopts coils with ID of φ500mm. It is operated manually under which it can load coils on both the heads which can be circumgyrated. 2. Flattener According to the flatness accuracy requirement, the flattener, calculating under the theory of minimum distortion is used to flatten, convey and draught the material. The flattener has 5 flattening rollers, 2 feeding rollers and 2 delivering rollers. And the distance of the rollers can be adjusted according to the thickness and rigidness of the material to ensure an ideal flattening function. The flattening rollers are made of heat treated high alloy steel to ensure the rigidity and abrasion proofed characteristics. 3. Front and Rear Material Stores In order to match the speed of intermission feeding while punching and the continuous feeding while roll forming for continuous production, in front and rear of the puncher material stores are supplied, in which the length of the material naturally sinks is able to provide a cushion for the interval of punching and the continuing of the roll forming. The dimension of the material stores depends on the forming speed. Photoelectric sensor equipment, mounted in the material stores, can stop or re start the roll former when the accumulated material monitored is too long or less.  4. Intermission Feeder This system, adopting sever roller feeder and computer controlling panel on which by input the feeding length the required feeding distance can be reached, is to feed the material into punching area in high accuracy. 5. Mechanical Puncher The puncher, adopting JF21-63 pressing system, combination pneumatic friction clutch, pressing brake and vertical axes, has an advantage of good rigidity, high accuracy, smooth clutching, flexible moving and low noise. 6. Roll Former The roll former is designed to have 20 forming stations sitting on steel structured frame. Every station is driven by gear box through universal shaft. The material is rolled through the roll former station by station to form the shape gradually by the rollers of GCr15 bearing steel, which were designed in Germany Roller Designing Software COPRA, processed on CNC lathes and heat treated at HRC56-60 to achieve an accurate profile. 

  Glazed Tile Roll Forming Machine Main Parameter(1) Material to be rolled: Q235, Colorbond Steel, coil (2) Thickness of the material: 0.4-0.8mm (3) Coil width max: 1250mm (4) Inner diameter of the coil: 520mm, subject to buyer’s requirement (5) Outer diameter of the coil: ≦1800mm (6) Decoiler: 5000kg, manual expansion (7) Roll stands: 16 (8) Main structure: wall style entire steel structure (9) Driving system: chain transmission (10) Main power: 5.5KW (11) Main reducer: cycloid pin (12) Cutting: Hydraulic cutting (13) Power of hydraulic station: 3KW (14) Material of blade: Cr12, heat treated HRC58-62 (15) Measure: encoder (16) Controller: PLC, Transducer, (17) Forming speed: 2-4m/min (18) Weight: abt.8.5mt  (19) Dimension (L*W*H) and Layout: Manual Decoiler: 1.1m*1.8m*1.2m Main Machine: 8.5m*1.4m*1.1m Runout Table: 4m*0.6m*0.8m Ⅲ. Process and Features Decoiler — Guiding —Roll Forming — Encoder —Hydraulic Punching —Hydraulic Cutter — run out table Roll Forming Process 1. This M/C adopts inner-expansion manual decoiler. The diameter can be adjusted through the adjusting bolt according to the coil’s inner diameter. The operation is quite easy. The decoiling speed is to the main machine’s forming speed. 2. The main frame is structured by welding entire T shape steel. The side stands are welded on the frame, and to clear the stress by vibration in order to maintain the rigidity and stability of the machine. 3. The forming rollers are made of GCr15 bearing steel through a series of heat treatment such as forging, distressing anneal, high frequency hardening(the degreed is 8-10mm), backfiring, phosphorization etc. The surface of the rollers can reach the rigidity of HRC58-62. All the forming rollers are process on CNC lathe, by which the accuracy can be granteed. 4. The main shaft is made of 40Cr advanced alloy steel after a series of heat treatment such as high frequency hardening, quenching and tempering etc and processed on lathe, burnishing the surface, wire cutting the channel to make it high accuracy and large capacity. 5. Cut to length is the last process of this machine line. It cuts accurately to any length you set on the PLC. The cutter consists of Hydraulic diver, profiled blade and cutter frame. The blade is made from Cr12 cold punching steel after strict process. It adopts 45 degree staggering cutting. This costs no waste and can hold the cutting profile a good shape. And this cutting is of high accuracy. 6. The machine adopts Mitsubishi FXIS series industrial PLC, Mitsubishi GOT-F series touch screen, Panasonic VF series Transducer and Omron encoder. The entire electric components are of good stability and long life.  

  Main technical parameter： 1.      manual decoiler: passive decoil,manual tightenting 2.      motor power of forming machine：7.5KW 3.      motor power of hydraulic station：3KW 4.      hydraulic oil pump: gear pump 5.      roll station： YX30-333.3-1000   18 stations;                YX34-250-1000    20 stations 6.      line speed：10m/min 7.      material of roller：high-grade 45# steel （heat treatment） 8.      surface of roller coated with chrome of thickness 0.05mm 9.      diameter of shaft：75 mm 10.  material of cutting blade：Cr12 11. cutting type：hydraulic cutting 12.  thickness of material：0.4-0.8mm 13. uncoiling width of material：1220mm 14. length tolerance：10m±2mm 15. transducer： ABB 16. computer adopts PLC，Mitsubishi  FX-IS 17. computer operating board adopts Xinjie OP320A Equipment: Manual decoiler、main forming machine、hydraulic cutting、PLC computer cabinet、hydraulic station、output table  

  The gutter roll forming machine is an important part for the drainage system for steel structured buildings. The gutter can be inside gutter and outside gutter. Here after comes the Main parameters of the gutter roll forming machine.   Profiles of the Gutter, square gutter Main Parameter1) Steel Material: Q235, Prepainted Coil2) thickness of material: 0.4-0.8mm3) Feeding Width Max: 300mm4) Capacity of Decoiler: 5000 kg5) Inner Diameter of the Coiler: 500-600mm6) Outer Diameter of the Coiler: 1800mm7) roll forming steps: abt.15 steps8) Driving System: Chain Transmission 9) Power of main motor: 3kw，3phases, 380V, 60Hz10) Reducer: Cycloid Pin11) Power of Hydraulic cutting Machine: 3kw12) roll Forming Speed Max: 15m/min13) Dimension (L*W*H) and Layout: Manual Decoiler: 1.1m*1.8m*1.2mMain Machine: 8m*0.8m*1.2m Tunout Table: 4m*0.6m*0.8m Process and Features Manual Decoiler — Guiding — Roll Forming — Length Measuring—Hydraulic Cutting—Runout Table1. This M/C adopts inner-expansion manual decoiler. The diameter can be adjusted through the adjusting bolt according to the coil’s inner diameter. The operation is quite easy. The decoiling speed is to the main machine’s forming speed.2. The main frame is structured by welding entire T shape steel. The side stands are welded on the frame, and to clear the stress by vibration in order to maintain the rigidity and stability of the machine. 3. The roll forming rollers are made of GCr15 bearing steel through a series of heat treatment such as forging, distressing anneal, high frequency hardening(the degreed is 8-10mm), backfiring, phosphorization etc. The surface of the rollers can reach the rigidity of HRC58-62. All the forming rollers are process on CNC lathe, by which the accuracy can be granteed.4. The main shaft is made of 40Cr advanced alloy steel after a series of heat treatment such as high frequency hardening, quenching and tempering etc and processed on lathe, burnishing the surface, wire cutting the channel to make it high accuracy and large capacity.5. Cut to length is the last process of this machine line. It cuts accurately to any length you set on the PLC. The cutter consists of Hydraulic diver, profiled blades and cutter frame. The blade is made from Cr12 cold punching steel after strict process. It adopts 45 degree staggering cutting. This costs no waste and can hold the cutting profile a good shape. And this cutting is of high accuracy.6. The machine adopts Siemens PLC, touch screen, Transducer and encoder. The entire electric components are of Schneider or Siemens and of long life.Grantee and Spare Parts ONE year Guarantee under normal usage.The following spare parts will be supplied for free with the machine:1. Distance Switch: 22. Solenoid Valves: 13. Air proof Washier For the Oil Cylinder: 14. Bearing: 65. Chain: 2 .

  Downspout Roll Forming Machine Line The water down pipe roll forming machine or water down spout roll forming machine are used to provide the water system for PEB buildings. It consists of a downpipe, downspout roll forming machine and a bending machine and a narrowing machine for the joint of the pipes in PEB projects Main Parameter1) Steel Material: Q235, Prepainted Coil2) thickness of material: 0.3-0.6mm3) Feeding Width Max: 330mm4) Capacity of Decoiler: 5000 kg5) Inner Diameter of the Coiler: 500-600mm6) Outer Diameter of the Coiler: 1800mm7) Forming steps: 24 steps8) Driving System: Chain Transmission 9) Power of main motor: 3kw, 3phases, 380V, 60Hz10) Reducer: Cycloid Pin11) Power of Hydraulic cutting Machine: 3kw12) Forming Speed Max: 15m/min13) Dimension (L*W*H) and Layout: Manual Decoiler: 1.1m*1.8m*1.2mMain Machine: 11m*0.7m*0.8m Tunout Table: 4m*0.6m*0.8m   2.1.4 Process and Features Manual Decoiler — Guiding — Roll Forming — Length Measuring—Hydraulic Cutting—Runout Table   roll forming process     1. The machine base is whole welding treatment with hot rolled I steel. The frame on the both sides of the machine is welded on the machine base and we can get rid of welding stress by shaking. 2. The actuating device is cycloid pin wheel reducer with the chain transmission. It makes the system safety reliable running no noise and less trouble. 3. The forming roller is made of wrought steel by digital control. Its hardness is up to HRC55 after high frequency heating treatment. And electroplating treatment guarantees the roller’s size fineness surface smoothness and long life service. 4. Hydraulic system made by Roxroth with hydraulic forming punch and cut-off process makes the material effective width same. Cut-off blade uses the material of Cr12. hardness up to HRC62 after heating treatment. Cross-section is smooth and no barbs. 5. The machine main axle is the material of quenched and tempered 45#steel. It makes the system excellent overall properties. 6. The electric control system made in Japan with safety reliable running highly efficiency is installed on the main machine base. It makes the system easy operation. 7. Length of the finished product is controlled by PLC. Its feature is easy-set and easy-operation.

  Curving Machine,bending machine,crimping machine. this bending machine is used to crimp the formed corrugated sheets into horizontal stripes through hydraulic crimping mold. The distance between each press will decide the curvature of the arch. It is suitable for edge of buildings ,parking garage, pavilion and various round roofs of buildings. Main Parameters： 1.Main power：0.85KW 2.Hydraulic power：5.5KW 3.Roll speed：0—10m/min 4．Specification of material：0.3—0.9 mm 5.Punching material：CR12  HRC55-60 surface with chrome 6．Control system： PLC  Panasonic 7.Dimension of machine：3000 mm×1400 mm×1400 mm 8、the max bending angle：1200 9、effective width of the sheet: 1000mm Main Features： A、the structure is simple and the appearance of the machine is beautiful because we adopt the shape-steel structure and process as a whole after welding. it has the ability of strong loading and stable operation when running the machine. B．All the components of machine are from brand-famous enterprise so that they ensure the machine normal function very effectively. C、we adopt the automatic length-fixed forming and cutting to guarantee the length to be precise and the finished product clear without deforming . D: it is very easy to install the equipment and suitable for producing in the factory. E: the machine has features of low noise and high efficiency. F．Layout of machine:  

  Automatic C Z purling Roll forming machine C-Z quick interchangeable Roll forming machine adopts a special structure. The rollers for C & Z are changed very quickly without dismantle any parts. One machine can produce all specifications of C & Z purlins. Crimples are optional to increase rigidity of purlin.   II Main technical data: 2.1 Main dimension: 11400 x 1600 x 1800mm 2.2 Total weight: 14000kg 2.3 Main motor: 18.5kW 2.4 Hydraulic motor: 5.5kW 2.5 Hydraulic pressure: 15-20MPa 2.6 Steps of rollers:    Feeding & guiding: two sets Lveling: one set, seven rollers    Main forming: 17 steps    Rectifying: one step 2.7 Forming speed: 10-12 m/min 2.8 Changing speed from one profile to another or from one size to another size: 15 minutes. 2.9 Purlin specifications:    For C purlin: 100-300mm    For Z purlin: 140-300mm 2.10 Suitable material: 1.5-3.0mm, Q195~345 cold rolled steel, hot-zinc coil 2.11 Material of rollers: GCr15, quenched HRC 58-62 2.12 Material of roller shafts: 45# steel, adjusted, diameter 75mm 2.13 Material of blade: Cr12 2.14 Material of punching head: Cr12 2.15 Length tolerance: +/-1.5mm 2.16 Tolerance of space between holes: +/-1mm (non-accumulative) 2.17 Tolerance of X-direction and Y-direction: +/-5mm within 6m. III Buildup of the line Mechanical expansion decoiler (passive drive, capacity 5tons), feeding & leveling device, pre-punching device (two punching cylinders), pre-cutting device, main forming unit, PLC control system (PLC, touch screen, inverter are from Japan), hydraulic station, manual run-out rack (suitable for 6 meters).  

  Self locked Roof panel roll forming machine is an updated version of traditional roll forming machine. Instead of using screws at joining position, the corrugated sheets produced by this line are Self-locked and have successfully solved the problem of leakage. The whole line consist of decoiler, sheet guiding equipment, roll forming system, cutting equipment, hydraulic station, electric controlling system, and runout table. The corrugated sheets produced by this line are strong and durable with high ribs. The joining type of these sheets is self-lock, which makes it easy to install and safe with excellent water proof and storm resistance. The products are widely used as the roof of factory, warehouse, garage, gymnasium, exhibition center, and cinema. Main Parameter1) Steel Material: Q235, 2) thickness of material: 0.4-0.8mm3) Feeding Width Max: 1250mm4) Capacity of Decoiler: 5000 kg5) Inner Diameter of the Coiler: 500-600mm6) Outer Diameter of the Coiler: 1800mm7) Forming steps: 20 steps8) Driving System: Chain Transmission 9) Power of main motor: 4kw，3phases, 380V, 50Hz10) Reducer: Cycloid Pin11) Power of Hydraulic cutting Machine: 3kw12) Forming Speed Max: 12m/min13) Dimension (L*W*H) and Layout: Manual Decoiler: 1.1m*1.8m*1.2mMain Machine: 9.5m*1.85m*1.3m Runout Table: 4m*0.6m*0.8m Process and Features Decoiler — Guiding —Roll Forming — Encoder —Hydraulic Cutter — run out table 1. This M/C adopts inner-expansion manual decoiler. The diameter can be adjusted through the adjusting bolt according to the coil’s inner diameter. The operation is quite easy. The decoiling speed is to the main machine’s forming speed. 2. The main frame is structured by welding entire T shape steel. The side stands are welded on the frame, and to clear the stress by vibration in order to maintain the rigidity and stability of the machine. 3. The forming rollers are made of GCr15 bearing steel through a series of heat treatment such as forging, distressing anneal, high frequency hardening(the degreed is 8-10mm), backfiring, phosphorization etc. The surface of the rollers can reach the rigidity of HRC58-62. All the forming rollers are process on CNC lathe, by which the accuracy can be granteed. 4. The main shaft is made of 40Cr advanced alloy steel after a series of heat treatment such as high frequency hardening, quenching and tempering etc and processed on lathe, burnishing the surface, wire cutting the channel to make it high accuracy and large capacity. 5. Cut to length is the last process of this machine line. It cuts accurately to any length you set on the PLC. The cutter consists of Hydraulic diver, profiled blade and cutter frame. The blade is made from Cr12 cold punching steel after strict process. It adopts 45 degree staggering cutting. This costs no waste and can hold the cutting profile a good shape. And this cutting is of high accuracy. 6. The machine adopts Mitsubishi FXIS series industrial PLC, Mitsubishi GOT-F series touch screen, Panasonic VF series Transducer and Omron encoder. The entire electric components are of good stability and long life.  

  Deck steel roll forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, post-cutting equipment, hydraulic station, controlling system, supporter table. The roll formed sheet produced by this machine has high strength with big rib, which adheres well to concrete. It is used as the floor of high buildings, and the cost of such floor is low. Main Parameter1) Steel Material: Q235, 2) thickness of material:  0.8 --1.2 mm3) Feeding Width Max: 1250mm4) Capacity of Decoiler: 5000 kg5) Inner Diameter of the Coiler: 500-600mm6) Outer Diameter of the Coiler: 1800mm7) Forming steps: 24 steps8) Driving System: Chain Transmission9) Power of main motor: 4kw，3phases, 380V, 50Hz10) Reducer: Cycloid Pin11) Power of Hydraulic cutting Machine: 3kw12) Forming Speed Max: 12m/min Main Components:Passive uncoiler: 1setGuiding equipment: 1 setRoll forming equipment: 1 setPressing equipment: 1setPost-cut equipment: 1 setHydraulic station: 1 setPLC controlling desk: 1 setSupporter table: 1 setSecurity cover (optional) Roll Forming Process of the Steel Deck Machine:Decoiler---Flattener----Roll Forming---Measure---Cutting---Runout Table 

  1. Material to be Rolled:  Q345, Steel Coil 2. Thickness To be Rolled:  1.5-2.5mm 3. Coil Width Max:  700mm 4. Inner Diameter of the Coil:  ф500-600mm 5. Capacity of the Decoiler:  5T 6. Main Power:  11kw，3phases, 380V, 60Hz 7. Power of Hydraulic Cutter:  7.5kw 8. Reducer:  BWY39-58-15 Cycloid Pin 10. Flattener:  ф90*7 rollers 11. Roll Stand:  12 horizontal Roller stands; 5 side roller stands                  12. Forming Speed:  up to12m/min 13. Shaft:  ф80mm, 40Cr, Quenched 14. Forming Roller:  Maxф420mm, GCr15, HRC58-62 15. Transmission:  1.5＇＇column Chain Transmission 16. Straightening System:  Cross Shaft 17. Forming Speed Max: 12m/min 18: Weight: about 8T 18. Dimension (L*W*H) and Layout: Manual Decoiler: 1.1m*1.8m*1.2m Main Machine: 11m*1.8m*1.3m Runout Table: 4m*0.4m*0.6m Note: A is for Decoiler; B is the space reserved for the material. It is usually 2.5 to 3M. And C is for Main Machine. D is for runout Table. 2.2.4 Process and Features Decoiler — Guiding —Feeding — Flattener —Roll Forming — Encoder — Straightener — run out table  

  Wall Roll Forming Machine adopts high accuracy controlling system to roll form the profiles with full automatic roll forming process. The wall roll forming line consists of decoiler, main roll former and runout talbe.... 1     Material to be Rolled:  Q235, Prepainted steel Coil 2     Thickness To be Rolled:      0.3-0.8mm 3     Coil Width:    1200mm 4     ID of the Coi:       ф508-600mm 5     Capacity of the Decoiler:     5T 6     Main Power:  5Kw 7     Power of Hydraulic Cutter: 3Kw 8     Reducer BWY39-58-15 Cycloid Pin 9     Roll Stand:     19 10   Material of Roller: GCr15, HRC58-62, Chrome plated 11   Material of the Shaft:    40Cr 12   Material of the Blade:   Gr12, Heat treated 13   Approxemate Dimension:    9m*1.2m*1.3m 14   Weight:   7.5T Process and Features Decoiler — Guiding —Roll Forming — Encoder —Hydraulic Cutter — run out table