Offer List

  Detailed offer Description Product Names :AlloySeamless Tubing Executive Standard: GB3087,GB5310,JIS G3461, JISG3454,JISG3462,ASTM/ASME A179 A192 A210 A213 A519,DIN17175,DIN2391, EN10216, etc Product particular communication: 1) Size: 6.35 -325 mm (OD) x 0.89 - 25mm (WT) ; 2) Tight tolerance, Smooth surface, Uniform mechanical property(Mechanical Properties equilibrium) ; 3) Heat treatment: BK, BKS, GBK, NBK,Stress Relief, Normalizing, Spheroidize Anneal, Annealing, Bright Annealing, Normalized, Quenched and Tempered, Solution Annealing, etc ; 4) Continuous stenciling as required ; 5) Rust prevention treatment, such as: immersion oil, lacquer, passivation, phosphating,etc; 6) Plastic plugs or caps on both ends as required ; 7) Packaging: Hexagonal bundles of max. 1,500kg with several steel strips, Wrapped in waterproof paper, PVC sleeve,and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires;Type: Round , Square, Rectangle, Hexagon. Streamline, etc; 8) Relevant Test: Chemical Component Analysis,Mechanical Properties(Ultimate tensile strength,Yield strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test,Hardness Test,Blow Test,etc), Exterior Size Inspection, Nondestructive Test,Hydrostatic Test; 9) Main Applications: Automobile and Bearing Industry, Mechanical and Structral Purpose, Boiler and Heat Exchanger, Hydraulic and Petrochemical Purpose, etc. Commercial Information: 1) Delivery : Within 30 days ; 2) Min Order : 25 Ton; 3) Packing way : As per our export standard for shipment ; 4) Term of payment : 30% T/T within 3 days after signing the contract, balance 70% before shipment. Or 30%T/T +70% irrepealable L/C ; 5) Delivery Port : Shanghai Port ; 6) Offer Validity : 5-7 Days ;

  Fabrication of U-Tubes for Heat-Exchangers Spans at extremely Short Delivery time, even Extra long (23 mts. ) is S. S. E. 's specialty. Tube Bending as per TEMA. Tubes to any specification and any length can be supplied in extremely short time due to our wide Mother Tube Stocks. Detailed Product Description Specifications: 1) Product name: U-bend steel pipe or U-shape steel pipe 2) Material: Carbon, stainless, titanium, non-ferrons 3) Specifications available according to customers' requirements 4) Materials available: TP304, TP304L, TP310/S, TP316L, TP316/316L dual grade, TP317L, TP321, TP347, 2205 (S31803), 2507 5) ASTM (ASME) standard: A) A213/A213M (SA213/SA213M) B) A269/A269M C) A312/A312M (SA312/SA312M) D) A450/A450M (SA450/SA450M) E) A1016/A1016M (SA1016/SA1016M) F) A530/A530M (SA530/SA530M) G) A789/A789M (SA789/SA789M) H) A790/A790M (SA790/SA790M) 6) Application: A) General services industries (petroleum, food, chemical, paper, fertilizer, Fabric, aviation and nuclear) B) Fluid, gas and oil transport C) Pressure and heat transmission D) Construction and ornament E) Boiler heat exchangers 7) Elaborate designs available as per customers' requirements Inner packing: Wooden cases, bundle or plastic bags, plywood boxes

  We can produce steel pipe, steel tube, square and rectangular steel hollow sections, High frequency steel pipe, Erw steel pipe, galvanized steel pipe, carbon steel pipe, balck steel pipe, hot roll steel pipe, structure steel pipe,Hot-Dip Galvanized Steel Pipe ?????????? Standard: GB/T 3091-2001, BS1387 / 1995(UK),BS4568:1970,DIN 2440/244 (GERMANY), ASTM A53-1996(USA) Material:SPHC,SPHD,SPHE,Q195-Q235,SAE1006 Characteristics: high quality of surface smoothness, high precision and easily bending, and higher hardness. Surface treatment: electroplating, electro-surging and painting Application Scope:our metal products are widely applied for bike, tent, trolley, sandy bench,gardening tools and furniture, which were made according to different workmanship and performances of steel pipe.Various choices for different specification, would fully meet client’s satisfaction. Packing: Fit for sea shipment packing and customer’s requirement. We are able to provide customers with quality products and perfect service. If you want to know more information, please kind to visit our website.

  This is the first large diameter longitudinal submerged arc welded (LSAW) pipe production line in China .The mill adopts continuous axis contorting J-C-O（J-ing, C-ing and O-ing）process with characteristics of high forming accuracy and efficiency as well as balanced distribution of forming stress.? ????????? Specifications: The mill has the advantages of wide specifications and can produce pipes in any size within its production range. Standards: JCOE/LSAW pipes-- for the transportation of oil, natural gas and chemical materialsOuality Standards : API、BS、ASTM 、JIS、DIN、GB 、ISO、DNV Grades : GB/T9711 L190-L555 (API 5CT,API 5L A-X80) Specifications: Outside Diameter : Φ406-Φ1829mm (16"-72") Wall Thickness : 6.0-25.4mm (1/4"-1") Length : 9-12.2m (30’-40’) Manufacturing Process:JCOE Pipe Manufacturing Process We are able to provide customers with quality products and perfect service. If you want to know more information, please kind to visit our website.

  We can supply the best quality Steel Pipe Elbow to you. Our price is competitive and we take responsibility to any quality uncertainty. Now, we are looking forward to even greater cooperation with overseas based on mutual profit. Our items comply with all Standards and their quality and durability are fully guranteed. Now, we are looking forward to even greater cooperation with overseas based on mutual profit. ? Descritption: Products: L/R Elbow( 90deg & 45deg & 180deg.), S/R Elbow (90deg & 180deg.)Applications: dairy, beer, pharmacy, beverage, electron and other industry fieldPayment Terms:Telegraphic Transfer in Advance (Advance TT, T/T), L/C at sightMinimum Order: 1 to 99 Pieces Inner packing: plastic bagOuter packing: carton Material:Stainless steel SUS304, SUS304L,SUS316, SUS316L, Carbon Steel, Alloy Steel… Size: Seamless From 1/2" --24" Butt Welded From 26"--48"Thickness:SCH20,STD,SCH40,XS,SCH80,SCH160,XXS Butt-welding Elbows and Returns ASME B16.9、ASME B16.28 、DIN2605、JIS2311、JIS2312、SGP、GB 12459、GB/T 13401、SH 3408、SH3409、HG/T 21635、HG/T 21631、SY/T 0510、?

  Our factories are ISO 9001 certified manufacturer and exporter of industrial Valves, Flanges, Pipe Fittings. API 6D and CE(TUV) approved, our products are delivered to customers worldwide, especially in the Middle East and the Americas. Please find the details of products as follows: Valves: Gate valve, Globe valve, Check valve, Ball valve, Butterfly valve, Plug Valves,Power valve, Type Strainers, etc.?Flanges: Welded Neck, Slip-on, Socked Weld, Lap Joint, Blind, Threaded Pipe Fittings: butt welded pipe fittings,seamless pipe fitting,Socket welding fittings elbows(45D, 90D & 180D),cross,ourlet Reduced & Equaltee,Concentric & Eccentric Reducer,Caps,Lap joint stub ends etc. (BW, SW, and Threaded)? Materials: Carbon Steel(SA234 WPB,), Alloy Steel, Stainless Steel(304, 304L, 316, 316L, 321, 321H, 310S, 347H), and Malleable Iron Standards: API, ANSI, DIN, BS, JIS, ASTMA105,ANSI/ASME36.10/36.19, ASME/ANSI B16.9/11, GB/T12459, GB/T13401, SH3408, SH3409, HG/T21635, HG/T21631, MSS SP-43, DIN 2605, JIS B2313 etc. Diameter: DN15-DN1200(from 0.5inch to 48 inches) Wall thickness: SCH10S-SCH160S Pressure: For SW/Threaded, from 150 to 9000Lbs, For BW, SCH 20, 30, 40, STD, 60, XS, 80, 100, 120, 140, 160, XXS ?All along, our company aims at the domestic and foreign markets, and continues improving operation and services. Provide higher quality and more competitive products to domestic and foreign customers. Best quality and prompt delivery and full responsibility are guaranteed. Your inquiries or order details are most appreciated. We will quote our best & competitive price by return fax or e-mail immediately. If you want to get more information welcome to visit our website: www dot sunnysteel dot com.Contacting us will be your best choice!

  Bend Pipe(Bend Elbows)Detailed Product Description: MATERIAL: A234-WPB. A420-WPL6. A403-WP304L. A403-WP316. A403-WP316L. Bending Radius?: R=3D, 4D, 5D………..Bending Angle (θ): Degree15,20,45,60,90,135,180and also could manufacture according the angles given by the clients. Straight Length (L): The length between two ends general from 300mm-1500mm, and also can product according to the clients’ requirement to product. Outer Diameter(D) D≤1220mm Wall Thickness(T) T≤120mm End Bevel according to the bevel of welding pipe fittings construction Weight (Kg)=[0.0433(D-T)TRθ]/100000+L(the weight of two ends straight bend) We are able to provide customers with quality products and perfect service. If you want to know more information, please kind to visit our website.

  Welding Neck Flanges:The welding neck flange is normally referred to as the "high hub" Flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the Flange. The welding neck flange is the best designed butt-welded flange of those currently available because of its inherent structural value. It is expensive because of the design. Threaded (Screwed) Flanges:The threaded flange is similar to the slip-on flange, but the bore is threaded. Its chief merit is that it can be assembled without welding, explaining its use in low pressure services at ordinary atmospheric temperatures and in highly explosive areas where welding create a hazard. Slip-On Flanges:The slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-on flanges are all bored slightly larger that the O.D. of the matching pipe. They are preferred over welding neck flanges by many users due to their lower initial cost, but final installation cost is probably not much less than that of the welding neck flange because of the additional welding involved. Lap joint Flanges:The lap joint flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange race. This radius is necessary to have the flange accommodate a lap joint stub end. Normally, a lap joint flange and a lap joint stub end are mated together in an assembly system. Blind Flanges:The blind flange is a flange without a bore. It is used to close off the ends of a piping system and/or a pressure vessel opening. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened. Socket Welding Flanges:The socket welding flange is similar to a slip-on flange except it has a bore and a counter bore dimension. The counter bore is slightly lager than the O.D. of the matching pipe, allowing the pipe to be inserted into the flange similar to a slip-on flange. The diameter of the smaller bore is the same as the I.D. of the matching pipe. A restriction is built into the bottom of the bore which sets as a shoulder for the pipe to rest on. This eliminates any restriction in flow when using a socket welding flange. Standard:JB/T81 GB/T9112-9124, HJ20592-20635, SH3406, ANSIB16.5 JISB2220. Pressure class (Mpa): 0.25--50 Material:Carbon steel(WPB A234), alloy steel,stainless steel Packing: Fit for sea shipment packing and customer’s requirement. Wooden box We are able to provide customers with quality products and perfect service.If you want to know more information, please kind to visit our website.

  For over 50 years, Wedge Products has supplied pipe end caps to the pipe, boiler, and tubing industries. We manufacture plain-end pipe caps in nominal sizes ranging from .540" to 12.750" diameter. Our caps are of one-piece construction, drawn from sheet steel or aluminum.? ? Applications: Fabricators of all types and grades of pipe have used our caps to protect ends and keep out dirt and other foreign material. Pipes capped with Wedge end caps arrive at the project site in perfect shape and ready for installation. Material:Carbon steel(WPB A234), alloy steel,stainless steel (304, 304L, 316, 316L, 321, 310, 310S) Packing: Fit for sea shipment packing and customer’s requirement. Size:Seamless: From 1/2’ up to 24’ Welded: From 1/2’ up to 72’ Wall thickness: From Sch5 up to Sch160(SCH55 up to SCH160S) We are able to provide customers with quality products and perfect service. If you want to know more information, please kind to visit our website.

  We can supply the best quality Steel Pipe Elbow to you. Our price is competitive and we take responsibility to any quality uncertainty. Now, we are looking forward to even greater cooperation with overseas based on mutual profit. Our items comply with all Standards and their quality and durability are fully guranteed. Now, we are looking forward to even greater cooperation with overseas based on mutual profit. ? Descritption: Products: L/R Elbow( 90deg & 45deg & 180deg.), S/R Elbow (90deg & 180deg.)Applications: dairy, beer, pharmacy, beverage, electron and other industry fieldPayment Terms:Telegraphic Transfer in Advance (Advance TT, T/T), L/C at sightMinimum Order: 1 to 99 Pieces Inner packing: plastic bagOuter packing: carton Material:Stainless steel SUS304, SUS304L,SUS316, SUS316L, Carbon Steel, Alloy Steel… Size: Seamless From 1/2" --24" Butt Welded From 26"--48"Thickness:SCH20,STD,SCH40,XS,SCH80,SCH160,XXS Butt-welding Elbows and Returns ASME B16.9、ASME B16.28 、DIN2605、JIS2311、JIS2312、SGP、GB 12459、GB/T 13401、SH 3408、SH3409、HG/T 21635、HG/T 21631、SY/T 0510、?

  We can supply the best quality Steel PipeConcentric reducer, eccentric reducer to you. Our price is competitive and we take responsibility to any quality uncertainty. Now, we are looking forward to even greater cooperation with overseas based on mutual profit. Our items comply with all Standards and their quality and durability are fully guranteed. Now, we are looking forward to even greater cooperation with overseas based on mutual profit. ?? Descritption: Name: Reducer: Concentric reducer, eccentric reducerStandard: ISO, 3A, DIN, SMSApplications: beer, dairy, beverage and pharmacy industryPrice: very competitive, especially the price of carbon and stainless steel seriesThe specifications can be designed and satisfied for customers’ special requirements Inner packing:Plastic bag or as per customers’ requests Outer packing:Carton or as per customers’ requests Material:Stainless steel SUS304, SUS304L,SUS316, SUS316L, Carbon Steel, Alloy Steel… Size: From 1" to 72"Thickness:SCH20,STD,SCH40,XS,SCH80,SCH160,XXS We are able to provide customers with quality products and perfect service. If you want to know more information, please kind to visit our website.?

  Steel Square and Rectangular Pipe Welded steel pipes are widely applied to body-building (fitness) equipment, leisure steel products, furniture, vehicles, medical equipment, structures and goods shelves Carbon Steel(Black and Zic galvaized):?1)Item: Square and Rectangular steel pipe 2)Material:Carbon Steel:Q195--Q2353)Diameter: 15mm--219mm4)Thickness:0.5--12mm,tolerance: +/-5%5)Standard: GB/T 6728/ ASTM A500/ BS13876)Squareness: +/-0.05mm7)Length tolerance: -0/+15mm8)Straightness: 0.2% of length 9)Out coated:Back and Steel coated with zinc galvanized coating inside and out by hot-dip method Stainless:1) Material: 304, 304L, 316, 316L,321L,430 or according to customers’ requests2) Size: 25 x 25 x 2mm, 50 x 50 x 3mm, 40 x 40 x 3mm, 80 x 80 x 4mm Wall thickness: 0.25mm-4mm3) Polishing: 400#, 320#, 180#, 240#, 80# and hair line3) Other dimensions are available Packing: Export strong bundle, plastic coverWe are able to provide customers with quality products and perfect service.?? If you want to know more information, please kind to visit our website.?

  Bend Pipe(Bend Elbows)Detailed Product Description: MATERIAL: A234-WPB. A420-WPL6. A403-WP304L. A403-WP316. A403-WP316L. Bending Radius?: R=3D, 4D, 5D………..Bending Angle (θ): Degree15,20,45,60,90,135,180and also could manufacture according the angles given by the clients. Straight Length (L): The length between two ends general from 300mm-1500mm, and also can product according to the clients’ requirement to product. Outer Diameter(D) D≤1220mm Wall Thickness(T) T≤120mm End Bevel according to the bevel of welding pipe fittings construction Weight (Kg)=[0.0433(D-T)TRθ]/100000+L(the weight of two ends straight bend) We are able to provide customers with quality products and perfect service. If you want to know more information, please kind to visit our website.

  Bend Pipe(Bend Elbows)Detailed Product Description: MATERIAL: A234-WPB. A420-WPL6. A403-WP304L. A403-WP316. A403-WP316L. Bending Radius?: R=3D, 4D, 5D………..Bending Angle (θ): Degree15,20,45,60,90,135,180and also could manufacture according the angles given by the clients. Straight Length (L): The length between two ends general from 300mm-1500mm, and also can product according to the clients’ requirement to product. Outer Diameter(D) D≤1220mm Wall Thickness(T) T≤120mm End Bevel according to the bevel of welding pipe fittings construction Weight (Kg)=[0.0433(D-T)TRθ]/100000+L(the weight of two ends straight bend) We are able to provide customers with quality products and perfect service. If you want to know more information, please kind to visit our website.

  Welding Neck Flanges:The welding neck flange is normally referred to as the "high hub" Flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the Flange. The welding neck flange is the best designed butt-welded flange of those currently available because of its inherent structural value. It is expensive because of the design. Threaded (Screwed) Flanges:The threaded flange is similar to the slip-on flange, but the bore is threaded. Its chief merit is that it can be assembled without welding, explaining its use in low pressure services at ordinary atmospheric temperatures and in highly explosive areas where welding create a hazard. Slip-On Flanges:The slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-on flanges are all bored slightly larger that the O.D. of the matching pipe. They are preferred over welding neck flanges by many users due to their lower initial cost, but final installation cost is probably not much less than that of the welding neck flange because of the additional welding involved. Lap joint Flanges:The lap joint flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange race. This radius is necessary to have the flange accommodate a lap joint stub end. Normally, a lap joint flange and a lap joint stub end are mated together in an assembly system. Blind Flanges:The blind flange is a flange without a bore. It is used to close off the ends of a piping system and/or a pressure vessel opening. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened. Socket Welding Flanges:The socket welding flange is similar to a slip-on flange except it has a bore and a counter bore dimension. The counter bore is slightly lager than the O.D. of the matching pipe, allowing the pipe to be inserted into the flange similar to a slip-on flange. The diameter of the smaller bore is the same as the I.D. of the matching pipe. A restriction is built into the bottom of the bore which sets as a shoulder for the pipe to rest on. This eliminates any restriction in flow when using a socket welding flange. Standard:JB/T81 GB/T9112-9124, HJ20592-20635, SH3406, ANSIB16.5 JISB2220. Pressure class (Mpa): 0.25--50 Material:Carbon steel(WPB A234), alloy steel,stainless steel Packing: Fit for sea shipment packing and customer’s requirement. Wooden box

  For over 50 years, Wedge Products has supplied pipe end caps to the pipe, boiler, and tubing industries. We manufacture plain-end pipe caps in nominal sizes ranging from .540" to 12.750" diameter. Our caps are of one-piece construction, drawn from sheet steel or aluminum.? ? Applications: Fabricators of all types and grades of pipe have used our caps to protect ends and keep out dirt and other foreign material. Pipes capped with Wedge end caps arrive at the project site in perfect shape and ready for installation. Material:Carbon steel(WPB A234), alloy steel,stainless steel (304, 304L, 316, 316L, 321, 310, 310S) Packing: Fit for sea shipment packing and customer’s requirement. Size:Seamless: From 1/2’ up to 24’ Welded: From 1/2’ up to 72’ Wall thickness: From Sch5 up to Sch160(SCH55 up to SCH160S) We are able to provide customers with quality products and perfect service. If you want to know more information, please kind to visit our website.