Sell 3D Panel Production Line

3D panel is a load bearing wall building material which adopts 3-dimension spatial steel wire mesh frame as the framework, anti-flaming polystyrene (EPS) foam panel or rock wool panel as heat protective core layer. External layer of the wall building material is sprayed with the pea gravel concrete or slush. It can be used to build the self-supporting house under the height of 10 meters according to the specifications constituted by the associated Chinese associated branches. According to US and European specifications, 3D panels can be exclusively used as the load bearing walls, the roof surface plates and floors of the self-supporting house under 7 storeys.

The production line is composed of XC-1200/D welder, PW-1200/D plane mesh welder, the steel wire rolling device, the steel wire bending device, the air compressor and purification plant and cement mortar spraying machine and so on. The micro-processor is used to control the whole production process of automatic wire feeding, welding and cutting and so on. Production capability per year can reach 450,000~600,000 m ² . The touch screen of the liquid crystal display and the overhang frame integrated device are provided. Modular design is adopted for control unit. Multi-item self-test functions are provided. The equipment has good maintainability, stability and reliability.

The production line belongs to initiative technology in China and is in the leading position at home. Multi-item technical criteria have reached or approached advanced technical level in the like products in the world. Now the production line has been exported to the Middle East region.

Anti-flaming polystyrene foam panel or rock wool panel

2.5mm- 4.0mm cold drawn low carbon wire or galvanized steel wire

Product specifications of the steel wire mesh frame sandwich panel(length width thickness)
    1220 (66,78,96,108,126,138) (3000~6000)mm

Can produce two types of the steel wire mesh frame sandwich panels at the same time for dense inserting and loose inserting .

Can produce two types of 3D panels at the same time, whose separations between the mesh surface and EPS panel are 13 mm and 19 mm the steel wire mesh frame sandwich panels for single surface and double surface.

Production capability: 450,000~600,000 m² per year

WeldCmissing rate: 3%

Welding strength: Pull-out rate for single point 450N

Power supply requirement: three-phase 380V 50Hz 360KVA