Hemodialysis machine

Detailed Product Description
▲ TMS-2028 main technical parameter ◆ Volume (length× width ×height): •370mm×340mm ×1570mm ◆ Weight: about 90kg 　　 ◆ Power supply voltage: AC220V±10% 　　 •Frequency: 50HZ ~ 60 HZ •Power: 1500W ◆ Blood pump/spare pump: •Flux: 15 ~ 340ml/min (Ф 6mm) 20 ~ 460 ml/min (Ф 8mm) ◆ Heparin pump: •Flux: 0.1ml/h～10ml/h(±5%) •Precise: 0.1ml/h •Injector size: 20ml/30ml/50ml 10ml/20ml/30ml (selectable) ◆ Arterial pressure: •display scope:-300mmHg～+300mmHg (±10mmHg) ◆ Venous pressure: •display scope:-50mmHg～+300mmHg (±10mmHg) ◆ Dialysate flow: •300ml/min～800ml/min linearity adjustable (+10%) (-5%) •Temperature:35.0℃~39.0℃ •Resolving rate:0.1℃ •Conductivity:13mS/cm~15.5mS/cm (±0.1 mS/cm) ◆ UF flow scope: 0～1800ml/h(±30ml/h ) 0～4000ml/h(optional) ◆ ISO UF flow scope:0～2000ml/h(±30ml/h) ◆ TMP •Scope:-100mmHg～+600mmHg (±20mmHg) ◆ Blood leakage monitor: •over 1ml blood per liter dialysate (flow:500ml/min) ◆ Blood level monitor: ultrasonic sensor ◆ Air bubble monitor: •Infrared and response threshold value: Single air bubble of 200 и I exists when Blood flux is 200ml/min ◆ Inflow pressure:0MPa～0.6MPa ◆ Inflow temperature: 5℃～30℃ ◆ Environment temperature: 10℃～30℃, • Relative humidity≤70% ◆ Rinse/disinfection: chemical disinfection (citric acid,peracetic acid and oxalic acid) ◆ Hot rinse: 80℃ ◆ Back-up power supply: last for 15-30min after electric-cut.(optional) ▲ TMS-2028 function Be applicable of hemodialysis treatment,hemoperfusion,Plasma Exchange,Pure ultrafiltration project.Touch screen was equipped and it can show Na＋and UF profiles;In addition,the functions ie.backup power supply, Kt/V,HCO3ˉ adjustment,single needle and acetate treatment are optional. ▲ Clinical Application ◆ Hemodialysis Therapy:same as TMS-2000 ◆ Pure ultrafiltration Therapy: same as TMS-2000 ◆ Hemoperfusion Therapy:same as TMS-2000 ◆ Plasma exchange Therapy:same as TMS-2000 ◆ Na＋and UF profiling: •Be applicable for reducing the cases during dialysis treatment such as low/high pressure,muscle convulsion, headache,nausea,vomit ect. ◆ Kt/V function: •The sufficiency of dialysis can be reflected by Kt/V.(Optional) ◆ HCO3 adjustment function: •Be applicable for sericous acid toxicosis patient. Be capable to calibrate the acid toxicosis status according to patient's state of illness.(optional) ◆ Backup power-supply: •It can last for 15-30 minutes after power cut off.(Optional) Providing the programmed UF and adjustable Na+ dialysis(Totally there are seven Na+ curves and seven Ufcurves for your selection). The suitable curve can be selected basing on patien's actual status.