Offer List

  Brief Introduction of Wire Mesh Cable Tray Systems: Wire Meshl Cable Tray is produced from high mechanical strength steel wires of up to 6mm. These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits.? Features and Benefits of?Wire Mesh?Cable Trays: 1. Electroplated Zinc Finish 2. Fast Easy Installation 3. Mesh Design Allows Cable Exit or Entry at any point 4. Clear Cable Identification 5. Supplied in 3 Metre Lengths 6. Significant Cost Savings Compared to Standard Tray Products 7. Simple Creation of Fittings on Site 8. Wide Range of Sizes9. Heights Shown are Internal Dimensions ? Manufacturing: Optional Material: Black Steel, Stainless Steel, Aluminium, Alloy,?Fibreglass Reinforced Plastic (FRP) Mode:?Top curved?/ Top Straight Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated. Color: Optional ? Suggestions: 1).??MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. ? 2). SURFACE FINISH:? A).?Zinc-plating cable trays are suitable for indoor use. The place where cold?zinc-plating cable trays?would?work should be dry, ventilated, and corrosion free. B).?Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays. C). Powder-coated cable trays?should be carried out in alkali and salt corrosion free site. D). Pickled & Passivated should be used to stainless steel wire trays.?

  Brief Introduction of Cable Tray Systems: ? Cable trays are widely?used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V. Wire mesh cable trays are used extensively for data cables and low voltage installations, steel wire tray has become increasingly popular with installers thanks to its ease of use, flexibility and lightweight structure. They are appropriate for Sensitive cables such as control cables, optical cables, telecommunication cables, etc. ? The Installation time of wire mesh cable?trays is reduced and no expensive preformed fittings have to be specially planned for or ordered. Fast, simple shaping can be carried out entirely on site. A bolt cutter, screw driver and a wrench are the only tools required to create the most complex of cable runs. A wide range of unique supports improves installation time even more. The tray is so easy to manipulate, one person can install a system unaided. ? ? Manufacturing: Common used?material: Steel, Stainless Steel Mode:?Top curved?/ Top Straight Surface Finish: Zinc-plating, Powder-coatedPowder Coating Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients. ? Suggestions: 1).??MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. ? 2). SURFACE FINISH:? A).?Zinc-plating cable trays are suitable for indoor use. The place where cold?zinc-plating cable B). Powder-coated cable trays?should be carried out in alkali and salt corrosion free site. C). Zinc-plating plus Powder-coated would be better. ? Wire Mesh Cable Tray Bends:Installed matching to wire mesh cable tray straight sections. They can be easily made by the straight sections.

  Brief Introduction of Cable Tray Systems: ? Cable trays are widely?used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V. Wire mesh cable trays are used extensively for data cables and low voltage installations, steel wire tray has become increasingly popular with installers thanks to its ease of use, flexibility and lightweight structure. They are appropriate for Sensitive cables such as control cables, optical cables, telecommunication cables, etc. ? The Installation time of wire mesh cable?trays is reduced and no expensive preformed fittings have to be specially planned for or ordered. Fast, simple shaping can be carried out entirely on site. A bolt cutter, screw driver and a wrench are the only tools required to create the most complex of cable runs. A wide range of unique supports improves installation time even more. The tray is so easy to manipulate, one person can install a system unaided. ? ? Manufacturing: Common used?material: Steel, Stainless Steel Mode:?Top curved?/ Top Straight Surface Finish: Zinc-plating, Powder-coatedPowder Coating Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients. ? Suggestions: 1).??MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. ? 2). SURFACE FINISH:? A).?Zinc-plating cable trays are suitable for indoor use. The place where cold?zinc-plating cable B). Powder-coated cable trays?should be carried out in alkali and salt corrosion free site. C). Zinc-plating plus Powder-coated would be better. ? Wire Mesh Cable Tray T Junction:Installed with fitting wire mesh cable tray straight sections.?Mesh?Tees can be easily made by the straight sections.

  Brief Introduction of Cable Tray Systems: ? Cable trays are widely?used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V. Wire mesh cable trays are used extensively for data cables and low voltage installations, steel wire tray has become increasingly popular with installers thanks to its ease of use, flexibility and lightweight structure. They are appropriate for Sensitive cables such as control cables, optical cables, telecommunication cables, etc. ? The Installation time of wire mesh cable?trays is reduced and no expensive preformed fittings have to be specially planned for or ordered. Fast, simple shaping can be carried out entirely on site. A bolt cutter, screw driver and a wrench are the only tools required to create the most complex of cable runs. A wide range of unique supports improves installation time even more. The tray is so easy to manipulate, one person can install a system unaided. ? ? Manufacturing: Common used?material: Steel, Stainless Steel Mode:?Top curved?/ Top Straight Surface Finish: Zinc-plating, Powder-coatedPowder Coating Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients. ? Suggestions: 1).??MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. ? 2). SURFACE FINISH:? A).?Zinc-plating cable trays are suitable for indoor use. The place where cold?zinc-plating cable B). Powder-coated cable trays?should be carried out in alkali and salt corrosion free site. C). Zinc-plating plus Powder-coated would be better. ? Wire Mesh?Junction 4 Way:Installed with fitting wire mesh cable tray straight sections.?Mesh?Tees can be easily made by the straight sections.

  Brief Introduction of Cable Tray Systems: ? Cable trays are widely?used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V. Wire mesh cable trays are used extensively for data cables and low voltage installations, steel wire tray has become increasingly popular with installers thanks to its ease of use, flexibility and lightweight structure. They are appropriate for Sensitive cables such as control cables, optical cables, telecommunication cables, etc. ? The Installation time of wire mesh cable?trays is reduced and no expensive preformed fittings have to be specially planned for or ordered. Fast, simple shaping can be carried out entirely on site. A bolt cutter, screw driver and a wrench are the only tools required to create the most complex of cable runs. A wide range of unique supports improves installation time even more. The tray is so easy to manipulate, one person can install a system unaided. ? ? Manufacturing: Common used?material: Steel, Stainless Steel Mode:?Top curved?/ Top Straight Surface Finish: Zinc-plating, Powder-coatedPowder Coating Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients. ? Suggestions: 1).??MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. ? 2). SURFACE FINISH:? A).?Zinc-plating cable trays are suitable for indoor use. The place where cold?zinc-plating cable B). Powder-coated cable trays?should be carried out in alkali and salt corrosion free site. C). Zinc-plating plus Powder-coated would be better. ? Wire Mesh Cable Tray Reducers:Connect wire mesh cable tray straight sections?of different width.

  Brief Introduction of Cable Tray Systems: A cable tray system, according to the US National Electrical Code, is "a unit or assembly of units or sections and associated fittings forming a rigid structural system used to securely fasten or support cables and raceways." Cable trays are used to hold up and distribute cables. With features of light weight, low cost, special shape, easy for installation, good ventilation etc,?Ladder type cable trays?suit for laying of large diameter cable, especially suitable for high/low voltage power cable laying. Ladder trays are used in applications with intermediate to long support spans ? Cable ladders are widely?used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V.?? Features and Benefits of Ladder Cable Trays: ? 1. Requires NO bending or cutting 2. Acts as a continuous ground conductor; no grounding splices 3. Adapts to difficult architectural designs, accommodates changes in direction and elevation of cable runs 4. Cuts installation time up to 50 percent.5. Provides strength, rigidity without additional hardware.6. Has smooth edges to avoid any cut in both the wire and the installer.7. Galvanized, powder coated or hot dip galvanized finishes to minimize corrosion.8. All support hardware available.9. Custom sizes and materials available. ? Design of Ladder Cable Trays: Two longitudinal side rails connected by individual O-Rung/U-Channel spaced on 150, 225, 300 or 600 mm centers. Cable Ladders are the most commonly used type of trays for maximum ventilation. Available in all materials. ? It's connected by Horizontal Elbow, Horizontal Tee, Horizontal Cross, Horizontal Reducer, Vertical Elbow Up / Vertical Elbow Down etc. ? Two Types: Single Layer Cable Trays / Double Layers Cable Trays (for ships use). ? Manufacturing: Optional Material: Black Steel, Stainless Steel, Aluminium, Alloy, Plastic, Fibreglass Reinforced Plastic (FRP) Mode: perforated / non-perforated Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Painting Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients.

  Brief Introduction of Cable Tray Systems: A cable tray system, according to the US National Electrical Code, is "a unit or assembly of units or sections and associated fittings forming a rigid structural system used to securely fasten or support cables and raceways." Cable trays are used to hold up and distribute cables. ? Cable trays are widely?used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V. ? Channel cable tray is a full closed cable tray, it is the best choice for laying computer cable, communication cable, thermal couple cable and other high sensitive control cable, this kind of cable tray has perfect performance in protecting cables in heavy corrosion environment and shield interfere of control cable ? Features and Benefits of?Channel Cable Trays: ? 1. Requires NO bending or cutting 2. Acts as a continuous ground conductor; no grounding splices 3. Adapts to difficult architectural designs, accommodates changes in direction and elevation of cable runs 4. Cuts installation time up to 50 percent.5. Provides strength, rigidity without additional hardware.6. Has smooth edges to avoid any cut in both the wire and the installer.7. Galvanized, powder coated or hot dip galvanized finishes to minimize corrosion.8. All support hardware available.9. Custom sizes and materials available. ? Design of?Channel Cable Trays: Can run two different types of cables by two individual channels. Cable?Trunkings are available in all materials. ? It’s connected by Horizontal Elbow, Horizontal Tee, Horizontal Cross, Horizontal Reducer, Vertical Elbow Up / Vertical Elbow Down, Reducer?etc. ? Two Types:?Fulclose Type (with covers)?/?Ventilated Type. ? Manufacturing: Optional Material: Black Steel, Stainless Steel, Aluminium, Alloy, Plastic, Fibreglass Reinforced Plastic (FRP) Mode: perforated / non-perforated Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Painting Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients.

  Brief Introduction of Cable Tray Systems: A cable tray system, according to the US National Electrical Code, is "a unit or assembly of units or sections and associated fittings forming a rigid structural system used to securely fasten or support cables and raceways." Cable trays are used to hold up and distribute cables. ? Cable trays are widely?used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V. ? ? Channel Cable?Trays?are suitable for electrical cable, controlling cable, lighting cable and distributing line with the voltage under 10KV. It can be installed with technological line, suspended above the floor or under beam, and also can be installed on the inside or outside wall or the sidewall of tunnel and cable ditch. ? Features and Benefits of?Channel Cable Trays: ? 1. Requires NO bending or cutting 2. Acts as a continuous ground conductor; no grounding splices 3. Adapts to difficult architectural designs, accommodates changes in direction and elevation of cable runs 4. Cuts installation time up to 50 percent.5. Provides strength, rigidity without additional hardware.6. Has smooth edges to avoid any cut in both the wire and the installer.7. Galvanized, powder coated or hot dip galvanized finishes to minimize corrosion.8. All support hardware available.9. Custom sizes and materials available. ? Design of?Channel Cable Trays: Can run two different types of cables by two individual channels. Cable?Trunkings are available in all materials. ? It's connected by Horizontal Elbow, Horizontal Tee, Horizontal Cross, Horizontal Reducer, Vertical Elbow Up / Vertical Elbow Down, Reducer?etc. ? Two Types:?Fulclose Type (with covers)?/?Ventilated Type. ? Manufacturing: Optional Material: Black Steel, Stainless Steel, Aluminium, Alloy, Plastic, Fibreglass Reinforced Plastic (FRP) Mode: perforated / non-perforated Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Painting Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients

  Brief Introduction of Cable Tray Systems: Cable trays are widely?used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V. ? Channel cable tray is a full closed cable tray, it is the best choice for laying computer cable, communication cable, thermal couple cable and other high sensitive control cable, this kind of cable tray has perfect performance in protecting cables in heavy corrosion environment and shield interfere of control cable ? Features and Benefits of?Channel Cable Trays: ? 1. Requires NO bending or cutting 2. Acts as a continuous ground conductor; no grounding splices 3. Adapts to difficult architectural designs, accommodates changes in direction and elevation of cable runs 4. Cuts installation time up to 50 percent.5. Provides strength, rigidity without additional hardware.6. Has smooth edges to avoid any cut in both the wire and the installer.7. Galvanized, powder coated or hot dip galvanized finishes to minimize corrosion.8. All support hardware available.9. Custom sizes and materials available. ? Design of?Channel Cable Trays: Can run two different types of cables by two individual channels. Cable?Trunkings are available in all materials. ? It's connected by Horizontal Elbow, Horizontal Tee, Horizontal Cross, Horizontal Reducer, Vertical Elbow Up / Vertical Elbow Down, Reducer?etc. ? Two Types:?Fulclose Type (with covers)?/?Ventilated Type. ? Manufacturing: Optional Material: Black Steel, Stainless Steel, Aluminium, Alloy, Plastic, Fibreglass Reinforced Plastic (FRP) Mode: perforated / non-perforated Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Painting Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients.

  Brief Introduction of Cable Tray Systems: Channel cable tray is a full closed cable tray, it is the best choice for laying computer cable, communication cable, thermal couple cable and other high sensitive control cable, this kind of cable tray has perfect performance in protecting cables in heavy corrosion environment and shield interfere of control cable ? Features and Benefits of?Channel Cable Trays: ? 1. Requires NO bending or cutting 2. Acts as a continuous ground conductor; no grounding splices 3. Adapts to difficult architectural designs, accommodates changes in direction and elevation of cable runs 4. Cuts installation time up to 50 percent.5. Provides strength, rigidity without additional hardware.6. Has smooth edges to avoid any cut in both the wire and the installer.7. Galvanized, powder coated or hot dip galvanized finishes to minimize corrosion.8. All support hardware available.9. Custom sizes and materials available. ? Design of?Channel Cable Trays: Can run two different types of cables by two individual channels. Cable?Trunkings are available in all materials. ? It's connected by Horizontal Elbow, Horizontal Tee, Horizontal Cross, Horizontal Reducer, Vertical Elbow Up / Vertical Elbow Down, Reducer?etc. ? Two Types:?Fulclose Type (with covers)?/?Ventilated Type. ? Manufacturing: Optional Material: Black Steel, Stainless Steel, Aluminium, Alloy, Plastic, Fibreglass Reinforced Plastic (FRP) Mode: perforated / non-perforated Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Painting Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients.

  A cable tray system, according to the US National Electrical Code, is "a unit or assembly of units or sections and associated fittings forming a rigid structural system used to securely fasten or support cables and raceways." Cable trays are used to hold up and distribute cables. ? Cable trays are widely?used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V. With features of light weight, low cost, special shape, easy for installation, good ventilation etc,?ladder type cable tray?suit for laying of large diameter cable, especially suitable for high/low voltage power cable laying.

  Brief Introduction of Cable Tray Systems: A cable tray system, according to the US National Electrical Code, is "a unit or assembly of units or sections and associated fittings forming a rigid structural system used to securely fasten or support cables and raceways." Cable trays are used to hold up and distribute cables. ? Cable trays are widely?used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V. Wire mesh cable trays are used extensively for data cables and low voltage installations, steel wire tray has become increasingly popular with installers thanks to its ease of use, flexibility and lightweight structure. They are appropriate for Sensitive cables such as control cables, optical cables, telecommunication cables, etc. ? The Installation time of mesh trays is reduced and no expensive preformed fittings have to be specially planned for or ordered. Fast, simple shaping can be carried out entirely on site. A bolt cutter, screw driver and a wrench are the only tools required to create the most complex of cable runs. A wide range of unique supports improves installation time even more. The tray is so easy to manipulate, one person can install a system unaided. ? Features and Benefits of?Wire Mesh?Cable Trays: 1. Low cost.2. Light in weight.3. Easy for line check and cleaning.4. Easy maintained. 5. Fast heat dispersion.6. Cables can be secured to clamps or ties. 7. Flexible and fast installation. 8. Safe-T-Edge design to protect cables. 9. Strong enough to withstand short circuits. ? Manufacturing: Optional Material: Black Steel, Stainless Steel, Aluminium, Alloy,?Fibreglass Reinforced Plastic (FRP) Mode:?Top curved?/ Top Straight Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated. Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients. ? Suggestions: 1).??MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. ? 2). SURFACE FINISH:? A).?Zinc-plating cable trays are suitable for indoor use. The place where cold?zinc-plating cable trays?would?work should be dry, ventilated, and corrosion free. B).?Hot-dip Galvanizing (HDG) cable trays are suitable for outdoor use. They should be used in a place where there is no acid, alkali and salty substance in case of short working life. C). Powder-coated cable trays?should be carried out in alkali and salt corrosion free site. D). Pickled & Passivated should be used to stainless steel wire trays.?

  Brief Introduction of Cable Tray Systems: A cable tray system, according to the US National Electrical Code, is "a unit or assembly of units or sections and associated fittings forming a rigid structural system used to securely fasten or support cables and raceways." Cable trays are used to hold up and distribute cables. ? Cable trays are widely?used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V. Wire mesh cable trays are used extensively for data cables and low voltage installations, steel wire tray has become increasingly popular with installers thanks to its ease of use, flexibility and lightweight structure. They are appropriate for Sensitive cables such as control cables, optical cables, telecommunication cables, etc. The Installation time of mesh trays is reduced and no expensive preformed fittings have to be specially planned for or ordered. Fast, simple shaping can be carried out entirely on site. A bolt cutter, screw driver and a wrench are the only tools required to create the most complex of cable runs. A wide range of unique supports improves installation time even more. The tray is so easy to manipulate, one person can install a system unaided. ? Features and Benefits of?Wire Mesh?Cable Trays: 1. Low cost.2. Light in weight.3. Easy for line check and cleaning.4. Easy maintained. 5. Fast heat dispersion.6. Cables can be secured to clamps or ties. 7. Flexible and fast installation. 8. Safe-T-Edge design to protect cables. 9. Strong enough to withstand short circuits. ? Manufacturing: Optional Material: Black Steel, Stainless Steel, Aluminium, Alloy,?Fibreglass Reinforced Plastic (FRP) Mode:?Top curved?/ Top Straight Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated. Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients. ? Suggestions: 1).??MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. ? 2). SURFACE FINISH:? A).?Zinc-plating cable trays are suitable for indoor use. The place where cold?zinc-plating cable trays?would?work should be dry, ventilated, and corrosion free. B).?Hot-dip Galvanizing (HDG) cable trays are suitable for outdoor use. They should be used in a place where there is no acid, alkali and salty substance in case of short working life. C). Powder-coated cable trays?should be carried out in alkali and salt corrosion free site. D). Pickled & Passivated should be used to stainless steel wire trays.?

  Brief Introduction of Cable Tray Systems: ? Cable trays are widely?used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V. Wire mesh cable trays are used extensively for data cables and low voltage installations, steel wire tray has become increasingly popular with installers thanks to its ease of use, flexibility and lightweight structure. They are appropriate for Sensitive cables such as control cables, optical cables, telecommunication cables, etc. ? The Installation time of wire mesh cable?trays is reduced and no expensive preformed fittings have to be specially planned for or ordered. Fast, simple shaping can be carried out entirely on site. A bolt cutter, screw driver and a wrench are the only tools required to create the most complex of cable runs. A wide range of unique supports improves installation time even more. The tray is so easy to manipulate, one person can install a system unaided. ? ? Manufacturing: Common used?material: Steel, Stainless Steel Mode:?Top curved?/ Top Straight Surface Finish: Zinc-plating, Powder-coatedPowder Coating Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients. ? Suggestions: 1).??MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. ? 2). SURFACE FINISH:? A).?Zinc-plating cable trays are suitable for indoor use. The place where cold?zinc-plating cable B). Powder-coated cable trays?should be carried out in alkali and salt corrosion free site. C). Zinc-plating plus Powder-coated would be better.

  Brief Introduction of Wire Mesh Cable Tray Systems: Wire Meshl Cable Tray is produced from high mechanical strength steel wires of up to 6mm. These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits.? Features and Benefits of?Wire Mesh?Cable Trays: 1. Electroplated Zinc Finish 2. Fast Easy Installation 3. Mesh Design Allows Cable Exit or Entry at any point 4. Clear Cable Identification 5. Supplied in 3 Metre Lengths 6. Significant Cost Savings Compared to Standard Tray Products 7. Simple Creation of Fittings on Site 8. Wide Range of Sizes9. Heights Shown are Internal Dimensions ? Manufacturing: Optional Material: Black Steel, Stainless Steel, Aluminium, Alloy,?Fibreglass Reinforced Plastic (FRP) Mode:?Top curved?/ Top Straight Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated. Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients. ? Suggestions: 1).??MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. ? 2). SURFACE FINISH:? A).?Zinc-plating cable trays are suitable for indoor use. The place where cold?zinc-plating cable trays?would?work should be dry, ventilated, and corrosion free. B).?Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays. C). Powder-coated cable trays?should be carried out in alkali and salt corrosion free site. D). Pickled & Passivated should be used to stainless steel wire trays.?

  Brief Introduction of Cable Tray Systems: The?Fibreglass Reinforced Plastic (FRP) cable trays are light, fire retardant, corrosion resistant, durable in extreme temperature and very strong. They have been widely used in a number of applications on bridges, underground and internet telecommunications. The cable trays compose of straight trays, connector, support and accessories. They are good for applications under 10KV, such as control cables, lighting and others for indoor, outdoor, and tunnel applications. Depending upon service environment and loading condition, there are serveral types to choose from. Please contact us if you ever need any information regarding loading and performance. ? Design of?FRP Cable Trays: Can run two different types of cables by two individual channels. Cable?Trunkings are made?of fibreglass reinforced plastic. ? It's connected by Horizontal Elbow, Horizontal Tee, Horizontal Cross, Horizontal Reducer, Vertical Elbow Up / Vertical Elbow Down, Reducer?etc. ? Two Types:?Fulclose Type (with covers)?/?Ventilated Type. ? Manufacturing: Mode: perforated / non-perforated Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Painting Color: Optional ? We are able to design styles in various specifications according to the drawings and/or samples by the clients. ? Installation: The cable trays have the advantages of high strength, reasonable structure, better load, flexible layout, easy construction, convenient installation and easy wire line extension. The electric cable bridge may be impractically laid along with the process tube, may under the floor, hoisted under the girder, or be placed in the room, outside of the wall, the column, the tunnel, or on the electric cable ditch wall, and also may be installed in the open-air column or frusta.