8 inch Submersible Pump (80 m3/h)

Detailed Product Description
8" and 6" (inch) submersible pumps are casting stainless steel submersible borehole pump, Power is from 150HP to 10HP, the Naminal flow rate is in 100 m3/h, 80 m3/h, 60 m3/h, 46 m3/h, 30 m3/h, 20 m3/h, Power is from 150HP to 10HP, these are more strength, durability, reliability than other submersible pumps. Eg. MODEL: 8CS80-10 Well diameter: 8"(200mm); Head. Max: 200m; Naminal flow rate in 80m3/h; Pump Stages: 10S; Power: 50HP. Applications: For water supply from wells or reservoirs. For domestic use, for civil and industrial applications. For garden use and irrigation. Operating conditions: Water temperature up to 55C. Minimum internal diameter of well: 200mm. Maximum immersion depth: 550m. Three-phase: 380-415V/50hz/60hz. Auto Micro Computer, on request. Warranty: 3 year. Material: 1, Top Bracket: Casting Stainless Steel 2, Bushing: High Grade Stainless Steel Added wih Special Hardening Material 3, Intermedate Bearing: Polyurethane 4, Diffuser: Casting Stainless Steel 5, Impeller: Casting Stainless Steel 6, Neck Ring: Casting Stainless Steel 7, Shaft: (1)AISI304ss (2)AISI316ss 8, Bottom Bracket: Casting Stainless Steel 9, Suction Strainer: Stainless Steel 10, Coupling: NEMA Standards; Stainless Steel FEATURES 1. Stainless steel components for durability and robustness to increase run time and trouble-free operation. Many technical features of the design make this pump range very compact and extremely reliable. 2. Three-dimensional twisted blades of the impeller and diffuser design ot enhance efficiency and to reduce energy consumption. 3. Four rods to improve stiffness and assure permanent alignment of all the components. 4. Motor adapter and discharge head may be removed without disturbing the impeller/diffuser stack. 5. Built-in check valve and over size pump shaft. 6. Very compact and extremely reliable to resist to the most complex and servere conditions. 7. Easily serviceable without the need of special tools. SPECIFICATIONS 1. Capacities up to 120m3/h at 50Hz/650GPM at 60Hz. 2. Heads to 450m at 50Hz/1650feet at 60Hz. 3. Maximum allowable amount of sand 50gr/m3(of the same hardness and granulometry of silt). 4. Water temperature range: From -5C to 60C. 5. Rotation: Counter clockwise when looking into the discharge. 6. Motor adapter in compliance with NEMA standard. 7. Pump can work continuously in a vertical or horizontal position. AVAILABLE OPTION 1. Double cable guard. 2. Discharge outlet adapters.