Offer List

  Description: ISG、IRG series vertical centrifugal pump are designed according to the unique structure of pipe centrifugal pump and measured up ISO2858. These series pump adopt the advanced fluid model optimized by pump experts. So the pumps have high efficiency and reliability. All the performance reaches and over the newest national standard JB/t53058-93. And they were qualified by National Machinery Industrial Department in 1993-pipe pump quality inspection. Some units and components have exported to internal markets and gained good comments from both domestic and oversea clients. Structure Explanation:See the structure picture. This pump composes of electric motor and pump with pump structure including the pump body, impeller, pump cover, mechanical seal. The pump is single stage and single suction centrifugal and vertical type with inlet and outlet at the same horizontal line and same dia. Able to mount on any pipe line at any place easily and small occupying place. The pump has foot to increase the consolidation of the pump and with the flange of inlet/outlet, a pressure hole can equip with pressure meter to ensure the pump long and lasting operation with in its rated performance. Working Condition:1.the pump system’s max working pressure is 1.6MPa, i.e. the inlet of pump’s pressure +pump head≤1.6MPa, working pressure is 2.5MPa, inlet pressure not exceed 0.3MPa, please note that if exceeding 0.3MPa, the seal of the impeller balance hole is needed to keep balance of shaft force.2.suitable liquid: solid particle should not exceed 0.1% of total volume with shape not exceed 0.2mm, if the liquid containing the small particle, the mechanical seal should adopt durable type.3.environmental temperature should be less than 40℃. Relative moisture should not exceed 95%. Main application:1.ISG vertical centrifugal pump used for pumping clear water and clear water like other liquid with temperature not exceeding 80℃, suitable for industrial and city water supply and drainage, pressurizing the pipe pressure for high building, garden watering, fire pipe pressurizing, distance water supply, heating supply, bath room and for cool and warm water recycle, booster and relative equip.2.IRG vertical hot water pump is used for energy, refinery, wooden process, chemical industrial, textile industrial, paper making, restaurant, bath room, hotel and for hot water recycling of boiler and city heating system with liquid temperature not exceeding 120℃.

  EMA Series Standard Single Phase Asynchronous Motor desiged and manufactured according to USA NEMA standard and Canada standard, NEMA series single phase asynchronous motor has the strong points like novel pattern, excellent technics and reliable performance. The motor features by low temperature rise, low noise and vibration, as well as high efficiency. The voltage of the series motor is 115/230V, and the frequency is 60HZ. Among the series of motors, the capacitor start and two-valued capacitor motor is suitable for air compressor, small machine tool and other fields requiring higher starting torque. The capacitor-running motor is suitable for ventilation, medical instrument and the fields of light and none loading start. We can also produce nema standard motors according to customers' special requirements

  NEMA Series Standard Single Phase Asynchronous Motor desiged and manufactured according to USA NEMA standard and Canada standard, NEMA series single phase asynchronous motor has the strong points like novel pattern, excellent technics and reliable performance. The motor features by low temperature rise, low noise and vibration, as well as high efficiency. The voltage of the series motor is 115/230V, and the frequency is 60HZ. Among the series of motors, the capacitor start and two-valued capacitor motor is suitable for air compressor, small machine tool and other fields requiring higher starting torque. The capacitor-running motor is suitable for ventilation, medical instrument and the fields of light and none loading start. We can also produce nema standard motors according to customers' special requirements

   Y(IP44)、Y2(IP54)series three-phase asynchronous electric motor conform to the standard of our country and the IEC. The export power of the machine and the relationship of the installment dimensions are totally in accord with the DIN　standard of Federation Germany. Y,Y2 series three phase motor are widely used in many places where exist combustible ,explosive or corrosive gas, and without any special requirement,such as machine tooles, pumps, fans, transport machinery, mixers,agriculture machinery and food machines. Specifications: 1) Frame sizes: 63-315  2) Rated power: 0.12-200kw3) Rated voltage: 220/380v,380/660v4) Frequency: 50Hz, 60Hz 5) Protection class: IP44 ,IP546) Insulation class: B,F7) Materials: Cast iron, aluminum (FRAME 63-160) 8) EFF: EFF3, EFF2, EFF1 9) Poles: 2, 4, 6, 8 10) Cooling method: IC411 (total-enclosed fan-cooled type) 11) Mounting types: IMB3 ,IMB5,IMB35,IMB34,IMB1412) Operating mode: S1 13) Connection: "Y" type for 3kW and downwards, "D"type for 4kW and upwards 14) Ambient temperature: -15C 15) The altitude should be lower than 1, 000m 16) Relative humidity: Not higher than 90% 17) Special motors can be designed according to Inner packing: 1) Frame 63-112: Foam boxes 2) Frame 132-315: Wooden boxes

  Y Series motor is totally enclosed and fan cooling, three-phase squirrel cage induction motor. It is newly deigned in conformity with the relevant rules  of  IEC and DIN42673 standards.Y  series motors have outstanding performance,  such as high efficiency, less comsuption, high starting torque, low noise, little vibration, reliable operation and easy maintenance  etc.  Y series motors are widely used in many  places, where do not exist combustible, explosive or corrosive gas, without any special requirements, such as machine tools, pumps, fans, transport machinery,  mixer, agriculture machinery and food machines  etc.

   SPS/SPWS

  Vents in endshield and/or frame are to prevent drops of liquid from falling into motor within a 15 degree angle from vertical. Designed for use in areas that are reasonably dry, clean, and well ventilated (usually indoors). If installed outdoors, it is recommended that the motor be protected with a cover that does not restrict the flow of air to the motor. We can also produce motors according to customers'requirements

  This motor has external fan as an integral part of the motor, to provide cooling by blowing air around the outside frame of the motor. We can also produce motors according to customers'requirements

  This motor is with large torque,and mainly fitted to winches,and other equipments need high torque in working

  This motor is with large torque,and mainly fitted to winches,and other equipments need high torque in working NEMA Series Standard Single Phase Asynchronous Motor desiged and manufactured according to USA NEMA standard and Canada standard, NEMA series single phase asynchronous motor has the strong points like novel pattern, excellent technics and reliable performance. The motor features by low temperature rise, low noise and vibration, as well as high efficiency. The voltage of the series motor is 115/230V, and the frequency is 60HZ. Among the series of motors, the capacitor start and two-valued capacitor motor is suitable for air compressor, small machine tool and other fields requiring higher starting torque. The capacitor-running motor is suitable for ventilation, medical instrument and the fields of light and none loading start.

   Y series motor is totally enclosed and fan-cooled, three phase squire cage induction motor,that is newly designed in conformity with the relevant requirements of IEC standards.Y series motor have outstanding performance,such as high efficiency, energy-saving,high starting torque,low noise,little vibration, reliable operation,easy maintenance,etc.Y series motors are widely used in places where not exists combustible, explosive or corrosive gas, and without any special requirements,such as machine tools, pumps, fans,transport machinery,mixer,agriculture machinery,food machines, etc. Protection Class:IP44/IP54/IP55　   Cooling Type:IC0141 　　　　  Insulation Class:B or FRated Frequency:50Hz(60Hz) 　　    Rated Volt:380V、230/380V 　Operation Type:S1

   ; ;Y2 series; three-phase induction motor is specially designed for European market, whose terminal box is located on the top. This motor has a very compact structure and attractive appearance. The sizes and mounting dimensions are produced according to the IEC standard. The motor has some good features, such as high efficiency, energy-saving, high starting torque and easy maintenance. We can also supply aluminum housing type for frame size below IEC132. ;Y2 series; motors can be widely used as driving equipments of various machineries, such as, machine tools, blowers, pumps, compressors, transporters, agricultural and food processing.;; ; Specifications & FeaturesRated voltage: 380V or on request, Rated frequency: 50Hz or 60HzConnection: Star-connection for 3KW or less while delta-connection for 4KW or more. Duty/Rating: Continuous (S1). Insulation class: F, the temperature rise of the stator winding is examined at 80K (by resistance method). Protection class: The main body of the motor is IP54, terminal box reaches IP55Cooling method: ICO141 (cooled by SELF-FAN) Improving electromagnetic and construction design, low noise and little vibration.Operating Conditions Ambient temperature: -15℃≤θ≤40℃Altitude: not exceeding 1000meters above sea level. Relative humidity less than 90% .Available typeFrame H63 to 315, 2/4/6/8 poles, Rated output: 0.12KW-200KWB3/B5/B14/B35/B34 mounting; Mounting dimensions according to IEC60034 standard.;;

   ? ;Y3 Series; three-phase induction motors, lately developed with new technique and new materials, are renewal and upgrading products of Y &Y2 series. Y3 series motors utilize cold rolled silicon steel, which is popular in the internationa motor field, are defined as totally enclosed, fan cooled, squirrel conge type and have good features such as novel design, beautiful model, high efficiency (which reaches EFF2 in Europe), low noise, large torque, excellent staring performance, compact structure, easy serving and etc. ;Y3 series; motors can be widely used as driving equipments of various machineries, such as machine tools, blowers, pumps, reducers, compressors, transporters, agricultural and fool processing and packing. ? Specifications & FeaturesRated voltage: 380V or on request, Rated frequency: 50Hz or 60HzConnection: Star-connection for 3KW or less while delta-connection for 4KW or more. Duty/Rating: Continuous (S1). Insulation class: F, the temperature rise of the stator winding is examined at 80K (by resistance method). Protection class: IP55Cooling method: ICO141 (cooled by SELF-FAN) Operating Conditions Ambient temperature: -15℃≤θ≤40℃Altitude: not exceeding 1000meters above sea level. Relative humidity less than 90% Available typeFrame H63 to 315, 2/4/6/8 poles, Rated output: 0.12KW-200KWB3/B5/B14/B35/B34 mounting; Mounting dimensions according to IEC60034 standard.

   ; This series motors are designed and manufactured into explosion proof type and the explosion proof property conforms to China National Standards: GB3836.1-2000 Electrical Apparatus for Explosive Gas Atmospheres-General Requirements. GB3836.2-2000 Electrical Apparatus for Explosive Gas Atmospheres- Explosion proof Enclosure d and standards IEC79-1, BS4683 and EN50018. ExdI- safe for use in the non-mining surfaces of underground coal mines where the explosive mixtures of methane or coal-dust are present. ExdIIAT4 - safe for use in plants where the explosive mixtures of IIA Class, TI, T2, T3 or T4 are present. ExdIIBT4 - safe for use in plants where the explosive mixtures of IIB Class, TI, T2, T3 or T4 are present. ExdIICT4 - safe for use in plants where the explosive mixtures of IIC Class, TI, T2, T3 or T4 are present.;; ; Specifications & Features:Rated voltage: 380V, 660V, 380V/660V, Rated frequency: 50HzDuty: Continuous (S1). Insulation class: FProtection degree: IP55Cooling method: ICO141 (cooled by SELF-FAN) Connection: Star-connection for 3KW or less while delta-connection for 4KW or more. Operating Conditions:1.Ambient temperature should not be more than 40℃.2.Altitude: not exceeding 1000meters above sea level. 3.Relative humidity should be less than 90%.Available typeFrame H63 to 315, 2/4/6/8 poles, Rated output: 0.12KW-200KWB3/B5//B35 mounting; mounting dimensions according to IEC60034 standard.c;;

  This series motors are designed and manufactured under incorporating the advantages of the counterparts in the world, and are in full conformity with international standard of IEC. This motor employs method of changing the pole numbers so as to carry out speed adjustment. The series motors havevolume, light weight, low noise, well starting performance, reliable operation, convenient maintenance, etc. The main technical indexes have reached the international standard.This series motors are widely used in various mechanical equipment which needs stepped speed adjustment, so that they enable the equipment to have compact structure, lower noise and ability to save energy.Simultaneously, multi-speed motor with special specification can be designed and manufactured according to the requirements of customers, such as multi-speed three-phase induction motor for YDT fans and pumps.

   YL series single phase capacitor start and capcitor running electric motor suitable for air compressor, water pump and other equipment requiring high torque.This series electric motor features by its high starting performance, overload capability, power factor and efficiency, low noise, light weight, little shape and easy maintance.Protection Class:IP44/IP54/IP55　　 Cooling Type:IC0141 Insulation Class:B or F　　　　　        Operation Type:S1 Rated Volt.:115/230、220V 　　　      Rated Frequency:60Hz(50Hz) Shell Material:casting iron, aluminum alloy(only used below 100).