steel cut wire shot(low carbon)/mild carbon steel cut wire shot   size available:0.2mm-1.5mm symbol of material:low carbon wire Q195 chemical composition:C:0.06-0.12%  Mn:0.25-0.5%  

Our mainly products are steel shot (S780 S660 S550 S460 S390 S330 S280 S230), steel grit ( G16 G18 G25 G40 G50 G80),steel cut wire shot (CW1.0 CW1.5),stainless steel shot,stainless steel cut wire shot

Shandong Kaitai Metal Abrasive CO.,LTD.  is  one of largest manufacturer and exporter of steel shots and steel grits in China. Cooperating with Material Science and Engineering College

1. Production specification: cw1.0, cw1.5, cw2.0 2. Chemical Composition of the products: C 0.45-0.75%, Mn 0.40-1.20%, Si 0.10-0.30%, S≤0.04%, P ≤0.04% 3. Hardness: cw1.0: 51-53HRC cw1.5: 41-45HRC

1, Chemical composition C less than 0.12% Mn less than 2.00% Si less than 1.00% Cr: 17-19% Ni: 7-10% S less than 0.03% P less than 0.035% 2, Average hardness (measured under 500g load): 41-49HRC (388-

Stainless steel shot/ stainless steel cut wire shot A shot blasting media for the cleaning, deburring & surface improvement of various casting types. It is most typically used on Aluminium, Non F

Steel Grit: Size:G10 G12 G14 G16 G18 G25 G40 G50 G80 G120 Chemical compositionsC :0.7-1.20% Mn :0.35-1.20% Si:>=0.40 S:<=0.05% P :<=0.05% Hardness: GP 46-50HRC   GL 56-60

supply steel cut wire shot 1.external form: cylinder 2.hardness: HRC 40-52 3.microstructure:deformed pearlite 4.chemical composition: C, Mn, Si, P,S 5.application: 1) Shot peening 2) surface pret

Shandong kaitai metal abrasive co.,ltd is the biggest manufacturer of metal abrasive in china which integrates with technical research ,development and production,cooperating with material science& en

    zinc  cut wire shot are widely used for shot peening to give compressive residual stress in the surface layer of components for fatigue life enhancement and suppression of stre