group nameHot dipped galvanized steel pipe
Min Order25 metric ton
brand nameBossen steel
payment methodL/C, D/A, D/P, T/T, Western Union, MoneyGram
update timeMon, 28 Mar 2016 13:29:24 GMT
Standard ASTM, BS, GB, JIS, ASTM A53-2007, BS 1387, GB/T3901, JIS G3444-2006
Grade A53-A369, Q195-Q345, A53(A,B), Q195, Q215, Q235, Q345
Thickness 2 - 4 mm
Section Shape Round
Outer Diameter 33.4 - 60.3 mm
Secondary Or Not Non-secondary
Application Structure Pipe
Technique ERW
Certification ISO ,CE
Surface Treatment Galvanized
Min Order25 metric ton
48.3mm Galvanized Steel Scaffolding Pipes are designed for pipes&coupler scaffolding.The pipes have hot-dipped galvanized surfaces finish so as to provide excellent appearance with sufficient durability in such applications where salty air or long-term weather exposures are inevitable.
Standard Size
galvanized scaffolding pipeOutside diameter (mm) | galvanized scaffolding pipeWall thickness (mm) | galvanized scaffolding pipeLength (m) |
---|---|---|
48.3-48.6 | 2.0-2.5 | 0.3-12 |
48.3-48.6 | 2.75 | 0.3-12 |
48.3-48.6 | 3.0 | 0.3-12 |
48.3-48.6 | 3.25 | 0.3-12 |
48.3-48.6 | 3.5 | 0.3-12 |
48.3-48.6 | 3.75 | 0.3-12 |
48.3-48.6 | 4.0 | 0.3-12 |
1. TOLERANCE:
a) On Specified OD + 0.5mm (Ovality 0.5mm)b) The Inside Diameter of ubes shall allow insertion of a guage of 37.7mm dia for a minimum length of 200mm.c) On Wall thickness -10%d) The mass deviation on a single tube shall not exceed -7.5% of the specified mass.
2. ENDS:
Cut cleanly and nominally square with the axis of the tube and free from excessive burrs.
3. PROPERTIES:
a) Chemical (Maximum) C - 0.20%, SI - 0.05%, MN - 1.40%, P - 0.04%, S - 0.045%, AL - Min. 0.02%.b) Mechanical = UTS - 340 to 520 N/mm2, YS - 235 N/mm2 (minimum) & %Elongation on 5.65 S0 - 24% (minimum).
4. FLATTENING TEST WELD AT 90 DEGREES (COLD):
a) For weld : Distance between the platens, measured under load is not greater than 75% of the OD of tube.b) For Material :Distance Between the platens, measured under load is not greater than 60% of the OD of tube.
5. STRAIGHTNESS:
1 in 500 (In 1 meter it should not exceed 3mm).
6. ZINC COATING:
Minimum local coating thickness on the outside surface 40 microns.(GALVANIZING)
7. MARKING:
a) We can emboss mill sign "EN 39 UTP 3 or 4." online at every one meter interval over the length of pipe.b) We can do online stencilling as per customer needs.
8. PACKING:
Hexagonal type.
9. MILL TEST CERTIFICATE:
We can issue a MTC, certifying that the tubes supplied comply with this Standard.
Tianjin Bossen International Trading Co. Ltd & Tianjin YouYong Steel Pipe Co.,Ltd
Add: No.7,Taipingcun Industrial Park,Daqiuzhuang Town,Jinghai County,Tianjin, China
Website:..........com
Mail: bossensteel2 ..........com
SKYPE: Bossensteel2
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.