group nameNewest LED Light
Min Order1 piece
brand nameOsman
modelOSM-2835-TL
payment methodT/T, Western Union
update timeSat, 24 Nov 2012 10:45:28 GMT
Min Order1 piece
T8 smd 2835 led tube :
Electrical Characteristics | |||
NO. | ltem | Unit | Parameter |
1 | T8 | mm | φ26 |
2 | Operating Voltage | V | AC100-240 |
3 | Operating Frequency | Hz | 50/60 |
4 | Operating Power | W | 18 |
5 | Operating Factor | / | >0.9 |
Photometric Characteristics | |||
1 | LED QTY | Pcs | 96PCS/2835SMD |
2 | Luminous Flux | lm | 1650-1750 |
3 | Viewing Angle | ° | 120 |
4 | Luminous Efficient | Lm/W | 95 |
5 | Color Temperature | K | 5700-6300 |
6 | Working Life | H | >30000 |
Environmenntial Range | |||
1 | Operating Range | °C | -20~+ |
2 | Operating Humidity | RH | <60% |
3 | Storage Range | °C | -20~+ |
4 | Storage Humidity | RH | 35%---45% |
Dimensions | |||
1 | Fluorescent Lamp Size | mm | Φ26× |
2 | Pachage Size | mm | 1250*200*210 |
3 | QTY Of Each Carton | Pcs | 25 |
Picture of product
Note: this kind product adpots latest constant current power supply technic.Power supply put in the end cap of led tube and adpots the way of male and female plug to connect with led PCB ,you just dismantle the end cap of tube and change new end cap if there is something wrong with power supply .no need to send back to original manufactory for changing .Heat radiation questions of power supply in aluminum pipe can be solved .it can increase the life of led tube .
Compare led tube which can be detachable power supply with common led tube
It’s known that power supply of led tube can decide the life of led tube.
Power supply is in aluminum pipe for common led tube,
1. Actually led PCB has big quantity of heat so that the life of power Supply to shorten.
2. Common led tube adopts welded wire and end cap to connect two side of led tube.end cap of two side is fixed by screw.LED tube need to send back to original manufactory if it’s broken or another reason!
Latest led tube of Osman
1. End cap can dismantle by yourself,end cap and aluminum pipe adopt fastener(clip) to connect for convenience and beauty.
2. Power suppy put in end cap of led tube ,there is no effect from quantity of heat of led PCB to extend the life of led tube .
3. Plug is adopted to connect between power suppy and LED PCB.if power supply is broken ,just ask Osman to send same model end cap for customer who change it by themselves,save time ,save labour, save money!
Structure picture of product
Operational principle:
Installation:
Installation step:
1、 Please check switch if it’s be closed before installation.
2、 Plese check circuitry if it’s correct,it electrifies to two sides of Tube directly without selenium rectifier.
3、Please check Tube if it’s broken ,don’t use it if it’s not good !
4、It can work if there is no wrong after installation as above
Application:
This products can be widely used in office buiding、work shop、school 、hospital、supermarket、underground parking lot、hotel etc.CE、RoHS has been approved.Anti-jamming capacity is very strong.Votalge is AC85-265V,it can widely used in everywhere of different country!we choose high brightness and low decay time LED to be good thermolysis effect! Decay time is under control!Easy intallation ,safety,no need maintenance,save energy.It has long life .Normally its life can reach more than 50,000 hours.Green product!
Attention:
1、Please check circuitry if it with good connection if Tube can’t work
2、Don’t clear Tube with wet towel
3、Don't install the product under damp、leakage. and unstrong place。
4、Please cut circuitry before intallation and disassembly!
5、Please install with right way which we provide for you!
6、Please contact professtional person for maintenance if it’s broken!
7、Don’t dismantle products by yourself!
。
Packing:
Packing step::
Step 1: Wrap tube with air bladder bag!
Step 2:Put tube into paper pipe,two sides with paper cover!
Step 3: Put Tube with good packing into carton box !
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.