group nameHot dip galvanized round steel pipe(tube)
Min Order10 piece
brand nameTYTSTEEL
payment methodT/T, L/C, D/P D/A, MoneyGram, Credit Card, Westem Union, Escrow
update timeFri, 01 Mar 2013 10:22:25 GMT
Technique ERW
Grade 16Mn, A53-A369, Q195-Q345
Thickness 0.8 - 12.0 mm
Outer Diameter 21.3 - 219.1 mm
Application Structure Pipe
Secondary Or Not Non-secondary
Min Order10 piece
Galvanized pipe
1).Specification:1/2" to 8"
2).Grade:Q195/Q215/Q235/Q345/st33
3).O.D.:1/2''-10''(21.3mm-219.1mm)
4).W.T.:0.8mm-12.0mm
5).Length:3m-10m
6)Zinc:40,50,60,80micron
Nominal size | Out diameter | Thickness |
inch | mm | mm |
1/2" | 21.3 | 1-2.8 |
3/4" | 26.9 | 1-2.8 |
1" | 33.7 | 1-3.2 |
11/4" | 42.4 | 1-3.5 |
11/2" | 48.3 | 1.5-3.5 |
2" | 60.3 | 1.5-3.5 |
21/2" | 76.1 | 1.5-3.75 |
3" | 88.9 | 4 |
4" | 114.3 | 4 |
5" | 139.7 | 4 |
6" | 168.3 | 4.5 |
8" | 219.1 | 4.0-6.0 |
TOLERANCE
:a) On Specified OD + 0.5mm (Ovality 0.5mm)
:b) The Inside Diameter of ubes shall allow insertion of a guage of 37.7mm dia for a minimum length of 200mm.
:c) On Wall thickness -10%
:d) The mass deviation on a single tube shall not exceed -7.5% of the specified mass.
2. ENDS
: Cut cleanly and nominally square with the axis of the tube and free from excessive burrs.
3. PROPERTIES
:a) Chemical (Maximum) C - 0.20%, SI - 0.05%, MN - 1.40%, P - 0.04%, S - 0.045%, AL - Min. 0.02%.
:b) Mechanical = UTS - 340 to 520 N/mm2, YS - 235 N/mm2 (minimum) & %Elongation on 5.65 S0 - 24% (minimum).
4. FLATTENING TEST WELD AT 90 DEGREES (COLD)
a) For weld : Distance between the platens, measured under load is not greater than 75% of the OD of tube.
b) For Material :Distance Between the platens, measured under load is not greater than 60% of the OD of tube.
5. STRAIGHTNESS
: 1 in 500 (In 1 meter it should not exceed 3mm).
6. ZINC COATING
: Minimum local coating thickness on the outside surface 40 microns.
(GALVANIZING)
7. MARKING
: a) We can emboss mill sign "EN 39 UTP 3 or 4." online at every one meter interval over the length of pipe.
b) We can do online stencilling as per customer needs.
8. PACKING
: Hexagonal type.
9. MILL TEST CERTIFICATE
:We can issue a MTC, certifying that the tubes supplied comply with this Standard.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.