20 - 40,000 ton
40,001 - 999,999 ton
group nameTYT STEEL SCAFFOLDING
Min Order20 ton
brand nameTYTSTEEL
payment methodT/T, L/C, D/P D/A, MoneyGram, Credit Card, Westem Union, Escrow
update timeTue, 22 Apr 2014 13:58:49 GMT
Standard BS, JIS, GB, ASTM
Standard BS 1387, BS 1139, BS EN10025, BS 4568, BS EN 39, JIS G3444-2006, GB/T 3091-2001, ASTM A53-2007
Grade A53-A369, ST35-ST52, Q195-Q345
Grade A53(A,B), St37, St52, St42, Q235, Q345, Q195, Q215
Thickness 1.2 - 9 mm
Section Shape Round
Outer Diameter 19 - 273 mm
Secondary Or Not Non-secondary
Application Structure Pipe
Technique ERW
Certification ISO9001-2001
Surface Treatment Galvanized
Special Pipe Thick Wall Pipe
Alloy Or Not Non-alloy
Brand TYSTEEL
CARGO GALVANIZED PIPE
Surface Treatmrnt Galvanized
USAGE Water,Gas,Oil,Construction,Structure:Scaffolding,and Fencing
Length 5.5-12m
Life Over 10 years
Min Order20 ton
Galvanized Steel Pipe
DIAMETER:DN15-DN250
WT:1.2-9mm
Length: 5.5-12m
Grade:Q195 Q215 Q235 ST33 ST37 ST42 ST52
Delivery status:Hot dipped galvanized
USAGE: WATER, OIL, GAS, CONSTRUCTION,BUILDING,STRUCTURE,FENCING,AND CONDUIT PIPE
LIFE : More than 10 YEARS
Reference Standard En39-2001:
Type |
|
| Outside Dia. of Black /Galvanized Tube |
|
| Weight of Black/ Galvanized Tube | |||||
| Size | Minimum | Maximum | Wall thickness | Plain ends | Pieces | |||||
| NB(mm) | inches | mm | inches | mm | inches | mm | inches | Kg/ft | Kg/meter | Per bundle |
3 | 40 | 11/2 | 47.8 | 1.882 | 48.8 | 1.921 | 3.2 | 0.126 | 1.090 | 3.56 | 61 |
4 | 40 | 11/2 | 47.8 | 1.882 | 48.8 | 1.921 | 4.0 | 0.157 | 1.332 | 4.37 | 50 |
1. TOLERANCE
:a) On Specified OD + 0.5mm (Ovality 0.5mm)
:b) The Inside Diameter of tubes shall allow insertion of a guage of 37.7mm dia for a minimum length of 200mm.
:c) On Wall thickness -10%
:d) The mass deviation on a single tube shall not exceed -7.5% of the specified mass.
2. ENDS
: Cut cleanly and nominally square with the axis of the tube and free from excessive burrs.
3. PROPERTIES
:a) Chemical (Maximum) C - 0.20%, SI - 0.05%, MN - 1.40%, P - 0.04%, S - 0.045%, AL - Min. 0.02%.
:b) Mechanical = UTS - 340 to 520 N/mm2, YS - 235 N/mm2 (minimum) & %Elongation on 5.65 S0 - 24% (minimum).
4. FLATTENING TEST WELD AT 90 DEGREES (COLD)
a) For weld : Distance between the platens, measured under load is not greater than 75% of the OD of tube.
b) For Material :Distance Between the platens, measured under load is not greater than 60% of the OD of tube.
5. STRAIGHTNESS
: 1 in 500 (In 1 meter it should not exceed 3mm).
6. ZINC COATING
: Minimum local coating thickness on the outside surface 40 microns.
(GALVANIZING)
7. MARKING
: a) We can emboss mill sign "EN 39 UTP 3 or 4." online at every one meter interval over the length of pipe.
b) We can do online stencilling as per customer needs.
8. PACKING
: Hexagonal type.
9. MILL TEST CERTIFICATE
:We can issue a MTC, certifying that the tubes supplied comply with this Standard.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.