COLO-191S Powder Coating System gives you the power and control needed to achieve the best looking finish .
Powder coating machine -----Model : CL-191S
Unprecedented precision control of current and voltage ensuring maximum efficiency and uniformity of coating.
- Flat Parts, maximizes voltage for optimum transfer efficiency.
- Complex Parts, modifies voltage while holding current for optimum penetration and transfer efficiency.
- Recoat Parts, automatically adjusts voltage and current to the optimum level for recoating previously coated parts.
offers mobility and flexibility allowing operators to position the unit for easy access and adjustment.
Electrical Data |
Nominal input voltage | 110V240VAC |
Frequency | 50-60Hz |
Connected load (without vibrator) | 40 VA |
Nominal output voltage (to the gun) | eff.10 V |
Nominal output current (to the gun) | max. 1.2 A |
Connection for rinsing function (valve) | 24 VDC max. 3 W |
Temperature range | 0°C - +40°C(+32°F - +104°F) |
Max. surface temperature | 85 °C (+185 °F) |
Approvals | II 3 D IP54 120 °C |
Pneumatical Data |
MAX.input pressure | 10bar |
MIN.input pressure | 6bar |
Input pressure (Dynamic based on pressure regulator setting) | 5.5 bar / 80 psi |
Max.water vapor content of the compressed air | 1.3g/Nm³ |
Max.oil vapor content of the compressed air | 0.1mg/Nm³ |
Max.compressed air consumption | 11Nm³/h |
Dimensions |
Width | 654mm |
Depth | 310mm |
Height | 428mm |
Weight | 16.5kg |
Processible Powders |
Plastic powder | yes |
Metallic powder | yes |
Enamel powder | no |