200 - 1,000 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
model630#
payment methodL/C, T/T, Western Union
update timeWed, 13 Nov 2013 09:39:57 GMT
Colour White
sample free
appearance liquid silicone
application molding silicone rubber
Weight1.072kg / kilogram
Min Order200 kilogram
RTV-2 Rubber Silicone for culture stone mold
1. RTV-2 Rubber Silicone for Stone Making application:
RTV-2 Rubber Silicone for culture stone mold can be used for production of different sizes of polyurethane moulds,gypsum moulds,plaster moulds, resin moulds,polyresin moulds,PU resin moulds,wax moulds,stone moulds ,epoxy moulds,acrylic moulds,polyester moulds making
A. Decorative items: cornices moulding ,columns moulding,ornaments moulding,statues molding.....
B. Casting of funiture and decoration crafts molding
C. Construction: prefabrication of decrative features molding,pavement molding,paving stone moulding,urban
furniture molding,concrete products molding
D. Soap moulding,candles crafts moulding,toys moulding,sculpture moulding
2. RTV-2 Rubber Silicone for culture stone mold of TDS:
Model | 630# |
Appearance | white |
Mixing ratio (%) | 5% |
Operating time ( hours ) | 30~40 |
Curing time( hours ) | 3~4 |
Hardness (A°) | 30 |
Density ( g/cm 3) | 1.08 |
Viscosity (25 C°,mPa.s) | 22000~ 24000 |
Tensile-strength ( kgf/cm2 ) | 40 |
Tear-strength (kgf/cm ) | 25 |
Elongation-break(%) | ≥ 420 |
Retractility(%) | ≤0.25 |
3. RTV-2 Rubber Silicone for culture stone mold main features:
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Excellent tensile and tear strength
5. Favorable hardness
6. High temperature resistance, acid and alkali-resistance and ageing resistance
7. High duplication times
4. RTV-2 Rubber Silicone for culture stone mold frequently asked question:
Why does the RTV-2 Rubber Silicone for culture stone mold appeared striately and unsmoothly?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
To recommend suitable product for your application, we would be much appreciated to have your following information:
1. What is the material of your product?
2. What is the size of your product?
3. How do you make silicone mold, by pouring or brushing?
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.